67 cheby's Dropmember build thread (CLOUD 9) - Page 80 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 11-16-2011, 04:31 PM

not to much just a few little touches buttoning up the inside of the bed, then it is off to the paint shop ! then a few trim panels and a electric fan shroud under the hood and all of the fab stuff should be done ! i might have to tweak my rear upper bag mounts and upper shock mounts just a little they were put on to lay out on 20's and now i have 22's on the back so it holds the rear of the frame behind the cab off of the ground about 1/2 inch....so just a few minor tweaks left

big_al_71 · 11-16-2011, 05:40 PM

Let me contribute to the next 100 pages....

**67cheby** · 11-16-2011, 05:42 PM

lol, thanks i appreciate your support

big_al_71 · 11-16-2011, 05:44 PM

Quote:

Originally Posted by 67cheby

lol, thanks i appreciate your support

I am here for you!!!!!!

ccracin · 11-17-2011, 01:50 PM

You won't go wrong with Kenny! Man you're hitting the Big Time... You have Fritz and Carter Hickman hanging out in your thread and now Kenny Davis is going to paint it...... Wow!

Just kidding, I know those guys too. But it is still a testament to your truck that these guys are hanging around. I can't wait to see this thing done.

**67cheby** · 11-17-2011, 04:05 PM

LOL......remember it has taken me 8 years to get to this point !! it has been a long road hopefully i am on the downhill slope and in the process of building a GREAT team to help me finish this endeavor !! and THANKS TO YOU AND EVERYONE FOR YOUR CONTINUING COMPLIMENTS AND IDEAS !!

big_al_71 · 11-18-2011, 12:03 AM

Quote:

Originally Posted by 67cheby

LOL......remember it has taken me 8 years to get to this point !! it has been a long road hopefully i am on the downhill slope and in the process of building a GREAT team to help me finish this endeavor !! and THANKS TO YOU AND EVERYONE FOR YOUR CONTINUING COMPLIMENTS AND IDEAS !!

Wow that is a long time I know that I DO NOT have that kind of patience. I am looking forward to the end result.

hgs_notes · 11-18-2011, 12:45 AM

Quote:

Originally Posted by 67cheby

LOL......remember it has taken me 8 years to get to this point !!!

I laugh at your eight years and add another 20.

Although I was able to drive mine most of that time, and I took it from frame off to driving in about 27 months...but it's not a comparable build to yours either. It'll be a work of art once you slap some paint on it and throw it back together.

**67cheby** · 11-18-2011, 10:26 AM

10 years !!!!......I CANT DO THAT ...i am at my wits end now, THIS THING IS GETTING DONE !!

**67cheby** · 11-18-2011, 10:33 AM

oh and yes i am getting very excited about the "team" Kenny's bodyman came over last night to look at the bodywork and he was excited he said that this was his favorite body style of chevy truck and that he couldnt wait to do it ! Now that is the kind of bodyman i want working on my truck !!

gringoloco · 11-18-2011, 10:57 AM

Noich! See you at Lone Star Nats?

**67cheby** · 11-18-2011, 11:04 AM

YEP....i will be there ! my goal is April

es67chevy · 11-18-2011, 11:39 AM

Take your time getting it done. I need a few more trophies on my mantel before i have to compete against you. I only hope they have a "low" class and a "really low" class.

babyblueoval · 11-18-2011, 08:44 PM

Quote:

Originally Posted by es67chevy

Take your time getting it done. I need a few more trophies on my mantel before i have to compete against you. I only hope they have a "low" class and a "really low" class.

So what class will you be in Eric? The "wish I was lower" class?

I couldn't resist.

es67chevy · 11-19-2011, 10:23 AM

Quote:

Originally Posted by babyblueoval

So what class will you be in Eric? The "wish I was lower" class?

I couldn't resist.

Yeah, that's probably accurate

**67cheby** · 11-18-2011, 12:02 PM

LOL...really low class !

big_al_71 · 11-18-2011, 12:21 PM

Quote:

Originally Posted by 67cheby

LOL...really low class !

I want to be in the low class..

**67cheby** · 11-18-2011, 12:26 PM

Al.....we have to put you in the "HOVERCRAFT" Class...you should win, i think you have the only one !

bmfpeterson · 11-18-2011, 01:06 PM

Quote:

Originally Posted by 67cheby

Al.....we have to put you in the "HOVERCRAFT" Class...you should win, i think you have the only one !

lol thats funny!

71Sleeper · 11-18-2011, 09:13 PM

Quote:

Originally Posted by 67cheby

Al.....we have to put you in the "HOVERCRAFT" Class...you should win, i think you have the only one !

I laughed out loud on this one...my wife was like what are you watching that's so funny then she came over and just rolled her eyes at me....

**67cheby** · 11-19-2011, 11:22 AM

Quote:

Originally Posted by 71Sleeper

I laughed out loud on this one...my wife was like what are you watching that's so funny then she came over and just rolled her eyes at me....

LOL...my wife does the same thing !!

big_al_71 · 11-19-2011, 12:05 AM

Quote:

Originally Posted by 67cheby

Al.....we have to put you in the "HOVERCRAFT" Class...you should win, i think you have the only one !

I just spit my drink all over the screen!!!!!!!!!!!!

Rochlow · 11-19-2011, 10:46 AM

Quote:

Originally Posted by 67cheby

Al.....we have to put you in the "HOVERCRAFT" Class...you should win, i think you have the only one !

I want to enter that class. My truck is in the same position right now.
Posted via Mobile Device

big_al_71 · 11-19-2011, 10:48 AM

Quote:

Originally Posted by Rochlow

I want to enter that class. My truck is in the same position right now.
Posted via Mobile Device

"Hovercraft Class" Rocks!!!

Rochlow · 11-19-2011, 10:52 AM

Quote:

Originally Posted by big_al_71

"Hovercraft Class" Rocks!!!

Woot Woot!
Posted via Mobile Device

11-16-2011, 04:31 PM	#1
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread not to much just a few little touches buttoning up the inside of the bed, then it is off to the paint shop ! then a few trim panels and a electric fan shroud under the hood and all of the fab stuff should be done ! i might have to tweak my rear upper bag mounts and upper shock mounts just a little they were put on to lay out on 20's and now i have 22's on the back so it holds the rear of the frame behind the cab off of the ground about 1/2 inch....so just a few minor tweaks left __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-16-2011, 05:40 PM	#2
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 67 cheby's Dropmember build thread Let me contribute to the next 100 pages.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-16-2011, 05:42 PM	#3
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread lol, thanks i appreciate your support __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-17-2011, 01:50 PM	#5
ccracin CCTek Join Date: Apr 2007 Location: Rostraver, PA Posts: 235	Re: 67 cheby's Dropmember build thread You won't go wrong with Kenny! Man you're hitting the Big Time... You have Fritz and Carter Hickman hanging out in your thread and now Kenny Davis is going to paint it...... Wow! Just kidding, I know those guys too. But it is still a testament to your truck that these guys are hanging around. I can't wait to see this thing done. __________________ Chad 68 swb Project http://67-72chevytrucks.com/vboard/s...d.php?t=262840 72 swb Project SOLD http://67-72chevytrucks.com/vboard/s...=1#post3993641 THANKS TO: Hermance Design (www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Tri-State Machine, Wegner Automotive Research, Nsane Hotrodz (www.nsanehotrodz.com), Clayton Machine Works, CCTek (http://www.candctek.com)

11-17-2011, 04:05 PM	#6
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread LOL......remember it has taken me 8 years to get to this point !! it has been a long road hopefully i am on the downhill slope and in the process of building a GREAT team to help me finish this endeavor !! and THANKS TO YOU AND EVERYONE FOR YOUR CONTINUING COMPLIMENTS AND IDEAS !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-18-2011, 10:26 AM	#9
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread 10 years !!!!......I CANT DO THAT ...i am at my wits end now, THIS THING IS GETTING DONE !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-18-2011, 10:33 AM	#10
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread oh and yes i am getting very excited about the "team" Kenny's bodyman came over last night to look at the bodywork and he was excited he said that this was his favorite body style of chevy truck and that he couldnt wait to do it ! Now that is the kind of bodyman i want working on my truck !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-18-2011, 10:57 AM	#11
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 67 cheby's Dropmember build thread Noich! See you at Lone Star Nats? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-18-2011, 11:04 AM	#12
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread YEP....i will be there ! my goal is April __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-18-2011, 11:39 AM	#13
es67chevy Registered User Join Date: Aug 2007 Location: Bella Vista, AR Posts: 1,107	Re: 67 cheby's Dropmember build thread Take your time getting it done. I need a few more trophies on my mantel before i have to compete against you. I only hope they have a "low" class and a "really low" class. __________________ Eric 1967 C10 SWB 383 Stroker/TH400 Brother's One Piece Power Windows Shaved Doors, Markers, and Bumpers 4/6 Early Classic Drop Rear Fuel Tank (49-52 Chevy Car Tank) Surf Blue Paint Bella Vista, AR (Arkansas for those that get the 'A' states mixed up) My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=330869

11-18-2011, 12:02 PM	#16
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread LOL...really low class ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-18-2011, 12:26 PM	#18
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread Al.....we have to put you in the "HOVERCRAFT" Class...you should win, i think you have the only one ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.