What did you do to your truck today!

[bsteele]

Just got the headers on. Had to go in from the bottom. Only issue looks like the bottom of the pass. side frame rail may touch a little. I didn't tighten 'em down yet. They are full length super comp. hookers for a '73 to '87. They came with the motor when I traded for it.

[mightymouse]

[img][attach][/attach][/img]my hooker supercomps hit the frame rails on each side on my 72

[wwotr]

Originally Posted by mightymouse

[img][attach]Attachment 720337[/attach][/img]my hooker supercomps hit the frame rails on each side on my 72

Had the same problem on my 67.
My Mechanic had to cut a small notch out of the Frame.

[ItsRandy]

Got the holes in the crossmember cut and lined with sch40 and then painted. Tried to install my brand new $750 Hooker headers...they don't fit. You would think for all that money they would jump out of the box and onto the truck all on their own!

[bucketObolts]

today I spent an hour in the back of my parts store trying to find a rad. hose that would clear my engine driven compressor belt. I had a flexhose with the spring inside and I dont even wanna now how much rust an/or pieces of rotted spring got sucked into my engine. I bought 2 that didnt work and just as I was going back to the store I almost fell over a full built 318 I have sitting in the garage. Wouldnt you know it there was an almost perfect hose right in front of me the whole time. After trimming 3 inches it was perfect! I started pulling my interior apart and took my console out to upgrade air valves and put in my painless kit. Then got sidetracked and wound up remaking the whole front half of my console for a smoother curve. I didnt go too crazy with it since Ill be pulling it out again when I get a radio and speakers someday. The console would be a perfect spot for a sub and some 6x9's.

[keanevann]

Channeled my bed 4 inches so i can run my air ride and still have full use of my bed.... Cut a longbed floor down to a shortbed floor because the PO had destroyed my shortbed floor (He used to drag race the truck so he cut half the floor out for a fuel cell and tubbed it)... Then I cut down the tubbed inner fenders to stock + 2 inches....

P.S. Thanks to ka_jd7and1 for the bed floor... much appreciated

[ItsRandy]

Yesterday I posted that my new $750 Hooker headers wouldn't fit. After more investigation and trimming of the driver's side lower control arm (drum roll) they fit (almost). Turns out Hooker, in their wisdom, didn't relieve the header flange to clear the head bolt heads that are installed on a ZZ502 crate motor, so, the headers are on my truck but I need to replace 8 head bolts with head bolts that have shorter bolt heads. Anyone heard of this before?

[jjtackleberry]

Watched it get snowed on....

anyone know where to get a CHEAP yet GOOD truck cover

[MrBeast]

Been making a punch list to wrap up my 4x4 conversion/Cummins install.





Also took the old fiberglass visor pos off.



Still a lot to do, but right now its looking like a truck again.

Until I blow it all back apart to finish boxing the frame. Then it will go back togeather after each piece is painted with POR-15

[project 67 sub]

drove it to church, had a few people looking at it and asking a few questions, than looked at it myself and said....... i have the lowest vehicle in the parking lot

[6772owner]

Project: That is awesome.

Over the weekend, I installed an ECE hidden hitch on my 72', installed the trailer wiring, remounted my compressor (interfered w/the hitch) and recalibrated my govenor in the 700R4 (what a pita!)

[70C10Toejam]

Took longer that "Today", thanks to the wonderful roller-coaster weather we've been having and a minor bout with the flu, but I got my new exhaust manifolds installed.

Engine was replaced in '97 and around 40,000 miles since then. Bolts came out nice and easy. The doughnut gasket between the manifold and pipe on the pass. side was pretty much blown out. Now I can hear my exhaust tone and not the exhaust leak

Before---there is also an "R" on the passenger side that you cant see. Guess the guys that put in the engine couldn't tell the difference. The pass. one also has a big crack that you can't see in the pic.




Thought I would give the Rust-oleum 2000* paint a try on the new ones.

[Slick67]

I cursed at mine today. Then went to the engine builder and cursed him.

[justagoodolboy]

I hauled mine to the paint guy this evening! But like a comple idiot I never thought to take pics till I was on the road, so now I have none since my truck is back together .The guy said he would buy an sd card and take some before he starts on it so I'm hoping he doesn't forget. It should be done in a month so I gotta get some stuff ordered and figure out if I wanna reuse the seat that was in it so when I get it back I'll (hopefully) be ready to get right on it.

[Scott Webster]

Drove it to pick up stuff for home construction project only to discover my thermosat housing leaks still. I have a crappy chrome one that I stripped the surfaces and also used forma gasket on the reinstall. I let it sit for 2 days before filling the radiator. On the plus side, no speeding tickets today!

[Jacfourteen]

Did some more prep work so I can weld my frame back together (the other day I started the lwb to swb conversion). Almost ready to get welding!

[ItsRandy]

Built the bracket for my oil cooler and painted it, pictures tomorrow.

[nickp51chevy]

Found out that I have a bad lower ball joint on my left front wheel, and you brake line is most likely collapsed too. Those pads were smokin' when I was able to pull over to check 'em.

[glider_6969]

Actually Sunday, put some gas in it and fired it up for the first time since I added the power brakes, and power steering and new mechanical gauges.
It all worked,,,, I even took it for a quick spin around the block.

[eagleuh1]

Used it to roll a perfectly good travel trailer in the median of Hwy 65 in Pine Bluff Arkansas. Came uncoupled for some reason at 70 while passing a Coleman Dairy truck. Jerked on the safety chains couple times while I tapped my brakes to get off cruise and hit my trailer brake controller to try and straighten it back up. It finally just shoved my rear in the air and drove me into the median and jacknifed then wipped around and rolled. The truck with my Honda 1800 stayed upright and bike stayed put. Glad I used 4 straps.



Luckily no injuries, just my pride. Rear bumper and bracket damaged, as well as rear bed cross brace, but repairable or replacable.

[magwakeenercew2jh]

Originally Posted by eagleuh1

Used it to roll a perfectly good travel trailer in the median of Hwy 65 in Pine Bluff Arkansas.

****!!! Sorry, Man.

[stich626]

Well, last week I dug out some stereo gear from my 97 f 150 that I installed in 98 and pulled when it was totalled in 2000
and desided to install the old junk that isn't worth anything in the truck

The doors where already cut front and rear for 6.5" speakers so I opened the rear hole and installed my boston acustic 6 by9s and pioneer 6.5"


I also had some kickpanels and a set of cerwin vaga(remember them) 6.5" two way seperates
the woofer is in the kick the tweeter in the dash


next was the really old jbl and kenwood amps



and then cut the crap out of my arms try'n to get this in the dash


and re installed the seat after a little rework

now to fit this blazer tank under the bed

this brace under the bed must be cut
all gone


there is another brace behind this one so it's not a big deal, if I was to use it like a 3/4 ton truck then,,
I'm gonna cut the brace at my cut about 3/8" and fold it in and weld it so it'll have a little added strenth..
after that sand and sand and then some por 15

[wwotr]

[QUOTE=eagleuh1;4587722] The truck with my Honda 1800 stayed upright and bike stayed put. Glad I used 4 straps.
[QUOTE]

That looks like a Honda VTX 1800C....No?

Glad you & your Truck are alright.

[pulltilbroke]

Pulled the old 15" slots off and put the old 16.5 slots on.

[60ratrod]

Where did you get the dash pillar stich?
Posted via Mobile Device