slik ricks 67 short wide CST - Page 80 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 07-22-2011, 02:55 AM

Quote:

Originally Posted by oldblue1968chevy

I have a bulb (that works) a decent (i guess) trim ring, and a the 'unity' badge is there.

Now swap me that tire carrier for the spot dangit

So what're some more longterm goals for the truck (hopefuly you get it running/driving soon lol

sweet! those are all i need, i have brand new, never used wire, inner outer rods and handle assembly. all i need is to replace my dented hammered spotlight housing and chrome ring with better chrome/body work, and get a badge with better color and chrome and body work lol

i will try!
plans im going to mowe next month this month i dont know but its soon and im going to get a 100 bucks and that is going straight to batteryand coolant lines! after that im going to see if i can get some good dash wiring for free and then im set, i will be able to start it whenever i want but it still wont drive

long term goals are: A/C, rear disk's, new trim all the wayarond top to bottom. and i think thats it for now... i might be hearing a lowering job in the long term future. but nothin major i was thinkin somewhat like how yours is john

67chevy1series · 07-22-2011, 04:10 AM

Quote:

Originally Posted by David67

ooo I like! keep it up!

thanks!!!!! yes my little upgrades have been coming true! heres an idea of what i want to do for the spare tire only i drew it on the wrong side! it should be drivers side anyways heres a pic

oldblue1968chevy · 07-22-2011, 10:38 AM

Well my spot aint the best in the world. I'll get pix when Im done cleaning/putting it back together (thing has fought me the whole entire way)

Drawing...i dont understand WHAT it is..lol

67chevy1series · 07-23-2011, 10:42 PM

its complicated to explain lol

Cameron 1137 · 07-23-2011, 11:05 PM

i understand, its a recessed tub in the bed for the tire to sit in, right? Dunenutt did it in his bed. on this page about a quarter of the way down.
http://67-72chevytrucks.com/vboard/s...=444887&page=2

slick copper · 07-23-2011, 11:16 PM

Rick I got trim! You'll have to look!

oldblue1968chevy · 07-23-2011, 11:56 PM

woopdy do 1 piece

rick i got some more tirm on my truck too

oldblue1968chevy · 07-23-2011, 11:56 PM

no the tire sits on the bed floor or nearly, no tub on the trucksjust burbs

67chevy1series · 07-24-2011, 06:45 PM

Quote:

Originally Posted by Cameron 1137

i understand, its a recessed tub in the bed for the tire to sit in, right? Dunenutt did it in his bed. on this page about a quarter of the way down.
http://67-72chevytrucks.com/vboard/s...=444887&page=2

yes you are correct

Quote:

Originally Posted by slick copper

Rick I got trim! You'll have to look!

im gonna go look at your build!

Quote:

Originally Posted by oldblue1968chevy

woopdy do 1 piece

rick i got some more tirm on my truck too

haha its a start i started with just two trim peices on both of my doors

Quote:

Originally Posted by oldblue1968chevy

no the tire sits on the bed floor or nearly, no tub on the trucksjust burbs

yes but i am going to modify it and have a receesed wheel ub like a burb for mine to lower it a little

oldblue1968chevy · 07-25-2011, 11:23 AM

I dont like the idea of hacking a nice floor up ricky. id leave it alone....your talking some stupid crazy stuff like I would now lol DONT START CUTTIN IT UP!

heeroyue2002 · 07-25-2011, 03:11 PM

rick has no floor. its a woodbed

**Dieselwrencher** · 07-25-2011, 03:13 PM

Quote:

Originally Posted by oldblue1968chevy

I dont like the idea of hacking a nice floor up ricky. id leave it alone....your talking some stupid crazy stuff like I would now lol DONT START CUTTIN IT UP!

Dude, it's just a bed floor that can have a patch installed later if needed.

67chevy1series · 07-26-2011, 03:55 AM

Quote:

Originally Posted by oldblue1968chevy

I dont like the idea of hacking a nice floor up ricky. id leave it alone....your talking some stupid crazy stuff like I would now lol DONT START CUTTIN IT UP!

lol i understand what you mean but i dont have a metal floor....

Quote:

Originally Posted by heeroyue2002

rick has no floor. its a woodbed

you bet!

Quote:

Originally Posted by Dieselwrencher

Dude, it's just a bed floor that can have a patch installed later if needed.

haha maybe he thought i had a metal floor?

oldblue1968chevy · 07-29-2011, 10:33 PM

Any new pictures for us fools rick

mr.chevy · 07-29-2011, 11:10 PM

Rick,

You should see if you can get just a sheet metal fender and turn it upside down and drop it in the floor. It might be a lot less fab work in the end.

Just a thought.

Here's one for less than 30 bucks from NorthernTools.com

oldblue1968chevy · 07-29-2011, 11:52 PM

factory tub would look like it belonged thoguh

67chevy1series · 07-30-2011, 12:51 AM

Quote:

Originally Posted by oldblue1968chevy

Any new pictures for us fools rick

haha no but i should take one. or two lol

Quote:

Originally Posted by mr.chevy

Rick,

You should see if you can get just a sheet metal fender and turn it upside down and drop it in the floor. It might be a lot less fab work in the end.

Just a thought.

Here's one for less than 30 bucks from NorthernTools.com

thats cool and a good idea.

Quote:

Originally Posted by oldblue1968chevy

factory tub would look like it belonged thoguh

you are correct and the wheel tubs in my truck are junk from the bottom an up 1 inch so ill use the best one to cut/weld and make my spare wheel well

jbclassix · 07-30-2011, 11:05 AM

Rick, what about just using a wheel tub out of a burb?

67chevy1series · 07-30-2011, 04:54 PM

i like that idea its alot rounder and has a hole already, but i need to find one... ill keep a look out. burbs dont find there way into ca junkyards

heeroyue2002 · 07-30-2011, 05:48 PM

i can go to your pad and take a bat to the truck... so you have work to do to keep u busy??
you'd also have pixs too =)
what are the wheel tubs? ones in the bed?

67chevy1series · 07-31-2011, 04:19 AM

NO im good lol and my truck says hes ok to

yes the ones in the bed, that bottom 2 inches are cr@p on them. so i need new ones when i get new ones i can cut patch panels for people or give them away.

67chevy1series · 08-04-2011, 06:07 AM

ok well as for progress i got my driver side red seat belt the retracting part and the buckle part alos got a deluxe brake pad the trim is broke and only has an outer ring and no middle pbar but the rubber pad is nice

moslty been working on my dad front end im going to be witching front clips on his truck 70 to 68

*project 67 sub* · 08-04-2011, 06:32 AM

hey Rick, go check out my new 67 seat belts and stuff, need to get me some more 67 belts though

edit: also got a 67 only inside rear view mirror arm but no pics of that

67chevy1series · 08-04-2011, 07:48 AM

ill check it right now... to bad you didnt tell me about the seat belts i had them from mine original but they were blue.

*project 67 sub* · 08-04-2011, 08:00 AM

oh well

07-22-2011, 10:38 AM	#1978
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Well my spot aint the best in the world. I'll get pix when Im done cleaning/putting it back together (thing has fought me the whole entire way) Drawing...i dont understand WHAT it is..lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-23-2011, 10:42 PM	#1979
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST its complicated to explain lol

07-23-2011, 11:05 PM	#1980
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: slik ricks 67 short wide CST i understand, its a recessed tub in the bed for the tire to sit in, right? Dunenutt did it in his bed. on this page about a quarter of the way down. http://67-72chevytrucks.com/vboard/s...=444887&page=2 __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

07-23-2011, 11:16 PM	#1981
slick copper Registered User Join Date: Aug 2010 Location: Richmond, KY Posts: 1,137	Re: slik ricks 67 short wide CST Rick I got trim! You'll have to look! __________________ Raymond 1967 Chevy C/10 LWB Custom Optioned "big window truck" AKA Copper. My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=452594 The story of how I got the truck:http://67-72chevytrucks.com/vboard/s...d.php?t=450939 Ole Smokey Build Thread 2002 Silverado 8.1L Crew Cab SOLDhttp://67-72chevytrucks.com/vboard/s...d.php?t=618402

07-23-2011, 11:56 PM	#1982
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST woopdy do 1 piece rick i got some more tirm on my truck too __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-23-2011, 11:56 PM	#1983
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST no the tire sits on the bed floor or nearly, no tub on the trucksjust burbs __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-25-2011, 11:23 AM	#1985
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST I dont like the idea of hacking a nice floor up ricky. id leave it alone....your talking some stupid crazy stuff like I would now lol DONT START CUTTIN IT UP! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-25-2011, 03:11 PM	#1986
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: slik ricks 67 short wide CST rick has no floor. its a woodbed __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

07-29-2011, 10:33 PM	#1989
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Any new pictures for us fools rick __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-29-2011, 11:10 PM	#1990
mr.chevy Registered User Join Date: Jul 2010 Location: Spanish Fork, Utah Posts: 209	Re: slik ricks 67 short wide CST Rick, You should see if you can get just a sheet metal fender and turn it upside down and drop it in the floor. It might be a lot less fab work in the end. Just a thought. Here's one for less than 30 bucks from NorthernTools.com Attached Images __________________ Ben Its a 67 Chevy C10 now, and its short now too. Here is my 1967 Chevy C10 Shortened Build Blog http://boyescustoms.blogspot.com Here is my 1967 Chevy C10 Shortened Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=433535 Last edited by mr.chevy; 07-29-2011 at 11:21 PM.

07-29-2011, 11:52 PM	#1991
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST factory tub would look like it belonged thoguh __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

07-30-2011, 11:05 AM	#1993
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: slik ricks 67 short wide CST Rick, what about just using a wheel tub out of a burb? __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

07-30-2011, 04:54 PM	#1994
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST i like that idea its alot rounder and has a hole already, but i need to find one... ill keep a look out. burbs dont find there way into ca junkyards

07-30-2011, 05:48 PM	#1995
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: slik ricks 67 short wide CST i can go to your pad and take a bat to the truck... so you have work to do to keep u busy?? you'd also have pixs too =) what are the wheel tubs? ones in the bed? __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

07-31-2011, 04:19 AM	#1996
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST NO im good lol and my truck says hes ok to yes the ones in the bed, that bottom 2 inches are cr@p on them. so i need new ones when i get new ones i can cut patch panels for people or give them away.



Register or Log In To remove these advertisements.

08-04-2011, 06:07 AM	#1997
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST ok well as for progress i got my driver side red seat belt the retracting part and the buckle part alos got a deluxe brake pad the trim is broke and only has an outer ring and no middle pbar but the rubber pad is nice moslty been working on my dad front end im going to be witching front clips on his truck 70 to 68 Last edited by 67chevy1series; 08-04-2011 at 06:13 AM.

08-04-2011, 06:32 AM	#1998
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: slik ricks 67 short wide CST hey Rick, go check out my new 67 seat belts and stuff, need to get me some more 67 belts though edit: also got a 67 only inside rear view mirror arm but no pics of that

08-04-2011, 07:48 AM	#1999
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST ill check it right now... to bad you didnt tell me about the seat belts i had them from mine original but they were blue.

08-04-2011, 08:00 AM	#2000
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: slik ricks 67 short wide CST oh well

Register or Log In To remove these advertisements.