What did you do to your truck today.The 3rd chapter - Page 81 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Peanut74 · 08-02-2021, 10:51 PM

Well I put in the automatic transmission linkage. Twice got it working smooth then had to take it apart a third time. The hole for the linkage bushing was to small and I had to drill it out. Hope the third time is the charm

Peanut74 · 08-06-2021, 07:05 PM

Well today I worked on getting brake fluid in the lines and find a fitting for the brake booster vacuum hose. found the fitting and got it installed and got three of the calipers bled. Broke the bleeder valve, on the last one, so now I have to order a new one. This truck is going to drive me over the edge at this rate.

**Ol Blue K20** · 08-06-2021, 08:09 PM

Quote:

Originally Posted by OregonNed

Finished doors

Doors look great!

OregonNed · 08-06-2021, 08:53 PM

Quote:

Originally Posted by Ol Blue K20

Doors look great!

Thank you! I ordered rear glass today to complete the project

72c20customcamper · 08-06-2021, 09:33 PM

Hung out with them

**allchevy58** · 08-14-2021, 11:10 PM

Safelite installed new windshield and back window. They did a nice job.

**Already Gone** · 08-07-2021, 12:56 AM

Got my TT 2's mounted on the Bridgestone 255/60 17's. Got some detailing on the centre caps to do then I'll probaby mount em on the truck just to see the look. My truck is in for some changes in the next year or so.

**Already Gone** · 08-07-2021, 06:33 PM

Didn't do it today but back in May I had the ECE Stainless Rear Mount Gas Tank I've had since 2003 along with the ECE Hidden Hitch and Hellwig Rear Sway Bar installed in my truck.

Chevys4life · 08-07-2021, 07:02 PM

Installed my new seat, seat belts, pedal pads, trim, headlight dimmer switch
and surround. It was a good day to finally move this interior along a little further.

67C10Step · 08-08-2021, 01:19 PM

Finished up the bed wood and painted the strips. Now to set the bed back off and get it installed. Also finished up the fuel line from the rear tank to the fuel pump and ran new fuel gauge wire. Gauge appears to be working and we will see about accuracy.

**Boog** · 08-09-2021, 09:59 AM

Quote:

Originally Posted by 67C10Step

Finished up the bed wood and painted the strips. Now to set the bed back off and get it installed. Also finished up the fuel line from the rear tank to the fuel pump and ran new fuel gauge wire. Gauge appears to be working and we will see about accuracy.

Dang, that wood looks good. I think I bought the same wood kit. Did yours come with the holes already drilled? Mine is still in the boxes.

67C10Step · 08-09-2021, 10:07 AM

Quote:

Originally Posted by Boog

Dang, that wood looks good. I think I bought the same wood kit. Did yours come with the holes already drilled? Mine is still in the boxes.

Jim - this is the basic yellow pine kit from Mar K and yes it was pre-drilled except the two edge pieces. I really almost hate to cover up the Boyd tank and all the work under the bed. It's probably the best looking part of the truck at this point.

**allchevy58** · 08-08-2021, 08:34 PM

Plugging away. Got the cowl, hood, grill and bumper on.

cab4word67 · 08-08-2021, 08:57 PM

Replaced my tilt front end actuator this morning "BACKWARDS"
It was a brand new 2 row 1" tube radiator. Good thing is I have drove it and it is not leaking, bad news is I dont like it.

**Boog** · 08-09-2021, 09:55 AM

If you are like me, when it will start pissing will always be on your mind, every time you are out in it.

**Jiggers72-GMC** · 08-09-2021, 09:02 PM

Quote:

Originally Posted by cab4word67

Replaced my tilt front end actuator this morning "BACKWARDS"
It was a brand new 2 row 1" tube radiator. Good thing is I have drove it and it is not leaking, bad news is I dont like it.

Oh crap, sorry to see that, it would drive me crazy just knowing the damage is there.

SoCoC10, she looks great man, well done so far.

Rich72C10 · 08-09-2021, 06:56 PM

Running out of things to do to the truck, which I guess is a good thing?

I almost bought a camper but the guy didn't want to move more than $25 bucks, so I decided to pass. Heck, I am not really 100% I want a camper shell - it just happen to be for sale on Craigslist!

I did decided to buy these United Pacific C677201 Door Sills. Mine had these little rust dots that I kept cleaning up after washing the truck. I figure these are likely to rust at some point too, they weren't all that expensive. I was suppose to get them Friday but the showed up on Saturday. Speedway Motor was good on their shipping guarantee and refunded the FedEx charges because it was 1 day late. Which was nearly the price of one sill!

Now if I can only find some of those wood grain bed rails..... though that will kill me ever getting a camper shell ha!

cab4word67 · 08-10-2021, 01:36 AM

SoSoC10 that truck is going to look sweet when your done

**Jiggers72-GMC** · 08-10-2021, 08:27 AM

It's hard to believe that a rubber seal would cut into a steel yoke like that, but I've seen it happen before
[IMG][IMG]

[/IMG][/IMG]

**Jiggers72-GMC** · 08-10-2021, 08:29 AM

more

**pjmoreland** · 08-10-2021, 05:09 PM

I found a key in a hide-a-key box inside my hood that fit my original door locks. I sent that key and the ignition cylinder to LockDoc. He rekeyed the cylinder. I installed everything back in my truck today. I like having the older looking octagonal key. Also, the door locks have a slight detent in the position where you remove the key that the replacement locks I had in my truck did not have. It makes it much easier to find the neutral position where the key will slide out.

**pjmoreland** · 08-12-2021, 11:33 PM

Washed my truck in preparation for a little local car show tomorrow evening.

OregonNed · 08-13-2021, 12:14 AM

New back window and seal from summit. Getting installed on Saturday with some
pics to follow

72c20customcamper · 08-14-2021, 06:53 PM

Changed out the open chamber spacer to the correct carb spacer. Trucks runs better and seat of the pants feel has more power. Before I buttoned it up I had to flip the new spacer over to get full secondaries

OregonNed · 08-14-2021, 07:48 PM

Had my new window installed while attending a truck meet today in Olympia WA

08-02-2021, 10:51 PM	#1
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: What did you do to your truck today.The 3rd chapter Well I put in the automatic transmission linkage. Twice got it working smooth then had to take it apart a third time. The hole for the linkage bushing was to small and I had to drill it out. Hope the third time is the charm __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

08-06-2021, 07:05 PM	#2
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: What did you do to your truck today.The 3rd chapter Well today I worked on getting brake fluid in the lines and find a fitting for the brake booster vacuum hose. found the fitting and got it installed and got three of the calipers bled. Broke the bleeder valve, on the last one, so now I have to order a new one. This truck is going to drive me over the edge at this rate. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

08-06-2021, 09:33 PM	#5
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,638	Re: What did you do to your truck today.The 3rd chapter Hung out with them Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

08-14-2021, 11:10 PM	#6
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,437	Re: What did you do to your truck today.The 3rd chapter Safelite installed new windshield and back window. They did a nice job. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

08-07-2021, 12:56 AM	#7
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: What did you do to your truck today.The 3rd chapter Got my TT 2's mounted on the Bridgestone 255/60 17's. Got some detailing on the centre caps to do then I'll probaby mount em on the truck just to see the look. My truck is in for some changes in the next year or so. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

08-07-2021, 06:33 PM	#8
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: What did you do to your truck today.The 3rd chapter Didn't do it today but back in May I had the ECE Stainless Rear Mount Gas Tank I've had since 2003 along with the ECE Hidden Hitch and Hellwig Rear Sway Bar installed in my truck. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

08-07-2021, 07:02 PM	#9
Chevys4life Registered User Join Date: Jun 2018 Location: Washington, DC Posts: 669	Re: What did you do to your truck today.The 3rd chapter Installed my new seat, seat belts, pedal pads, trim, headlight dimmer switch and surround. It was a good day to finally move this interior along a little further. Attached Images Last edited by Chevys4life; 08-08-2021 at 01:52 PM. Reason: Misspelling of word

08-08-2021, 01:19 PM	#10
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do to your truck today.The 3rd chapter Finished up the bed wood and painted the strips. Now to set the bed back off and get it installed. Also finished up the fuel line from the rear tank to the fuel pump and ran new fuel gauge wire. Gauge appears to be working and we will see about accuracy. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

08-08-2021, 08:34 PM	#13
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,437	Re: What did you do to your truck today.The 3rd chapter Plugging away. Got the cowl, hood, grill and bumper on. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

08-08-2021, 08:57 PM	#14
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 184	Re: What did you do to your truck today.The 3rd chapter Replaced my tilt front end actuator this morning "BACKWARDS" It was a brand new 2 row 1" tube radiator. Good thing is I have drove it and it is not leaking, bad news is I dont like it.

08-09-2021, 09:55 AM	#15
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,452	Re: What did you do to your truck today.The 3rd chapter If you are like me, when it will start pissing will always be on your mind, every time you are out in it. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

08-09-2021, 06:56 PM	#17
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter Running out of things to do to the truck, which I guess is a good thing? I almost bought a camper but the guy didn't want to move more than $25 bucks, so I decided to pass. Heck, I am not really 100% I want a camper shell - it just happen to be for sale on Craigslist! I did decided to buy these United Pacific C677201 Door Sills. Mine had these little rust dots that I kept cleaning up after washing the truck. I figure these are likely to rust at some point too, they weren't all that expensive. I was suppose to get them Friday but the showed up on Saturday. Speedway Motor was good on their shipping guarantee and refunded the FedEx charges because it was 1 day late. Which was nearly the price of one sill! Now if I can only find some of those wood grain bed rails..... though that will kill me ever getting a camper shell ha! Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-10-2021, 01:36 AM	#18
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 184	Re: What did you do to your truck today.The 3rd chapter SoSoC10 that truck is going to look sweet when your done

08-10-2021, 08:27 AM	#19
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 550	Re: What did you do to your truck today.The 3rd chapter It's hard to believe that a rubber seal would cut into a steel yoke like that, but I've seen it happen before [IMG][IMG][/IMG][/IMG] __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

08-10-2021, 08:29 AM	#20
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 550	Re: What did you do to your truck today.The 3rd chapter more __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual



Register or Log In To remove these advertisements.

08-10-2021, 05:09 PM	#21
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,789	Re: What did you do to your truck today.The 3rd chapter I found a key in a hide-a-key box inside my hood that fit my original door locks. I sent that key and the ignition cylinder to LockDoc. He rekeyed the cylinder. I installed everything back in my truck today. I like having the older looking octagonal key. Also, the door locks have a slight detent in the position where you remove the key that the replacement locks I had in my truck did not have. It makes it much easier to find the neutral position where the key will slide out. Attached Images

08-12-2021, 11:33 PM	#22
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,789	Re: What did you do to your truck today.The 3rd chapter Washed my truck in preparation for a little local car show tomorrow evening. Attached Images

08-13-2021, 12:14 AM	#23
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter New back window and seal from summit. Getting installed on Saturday with some pics to follow Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop Last edited by OregonNed; 08-13-2021 at 12:15 AM. Reason: Misspelled

08-14-2021, 06:53 PM	#24
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,638	Re: What did you do to your truck today.The 3rd chapter Changed out the open chamber spacer to the correct carb spacer. Trucks runs better and seat of the pants feel has more power. Before I buttoned it up I had to flip the new spacer over to get full secondaries Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

08-14-2021, 07:48 PM	#25
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Had my new window installed while attending a truck meet today in Olympia WA Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

Register or Log In To remove these advertisements.