PO has me PO'd - Page 82 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 07-15-2013, 05:47 PM

ok, I found them plates and ubolt, still in my scrap pile. If you want, just cover shipping and there yours.

**jaros44sr** · 07-15-2013, 06:51 PM

Quote:

Originally Posted by Dale99

ok, I found them plates and ubolt, still in my scrap pile. If you want, just cover shipping and there yours.

Are the plates heavily pitted? I just bought some aluminun stock to build the plates, but if yours are in good shape, ill take them. Thanks for thinking of me

Dale99 · 07-15-2013, 08:27 PM

There still kinda muddy, but I see no pitting at all. Send me a pm with your addy if you want them and I will get them out in next few days.

:Edit: Relooked. It is just starting to get to the points of pitting. But they are still very solid pieces.

**jaros44sr** · 07-16-2013, 08:51 AM

Thanks for taking the time, and not going to the scrap yard yet....PM sent

Dale99 · 07-16-2013, 09:25 PM

Do you need the ubolt? Its bent, but could possibly be useable.

**jaros44sr** · 07-16-2013, 10:48 PM

Quote:

Originally Posted by Dale99

Do you need the ubolt? Its bent, but could possibly be useable.

Yes, if the threads are good

Dale99 · 07-17-2013, 12:28 PM

Just sent out, should have friday.
Posted via Mobile Device

**jaros44sr** · 07-17-2013, 01:26 PM

Quote:

Originally Posted by Dale99

Just sent out, should have friday.
Posted via Mobile Device

Sweet, thanks Dale. And yet another reason why this board rocks....how much do i owe you for shipping?

Dale99 · 07-17-2013, 05:42 PM

After thinking about it, I got a box of hardware for free off this site. So I'll pass that along.

**jaros44sr** · 07-18-2013, 09:36 AM

20130717_123126 by jarosaj, on Flickr

Had my nephew make a plug for the fuel regulater, was told or read that you dont need to, (gotta be true, if it was on the internet, bonjour)lol, but i thought it would be better to have the return fuel go directly into the basket, as opposed to just shooting all over and some of it going in the basket

Got the 1/4" 6061 aluminum plate from McMaster-Carr, for the retaining plate at the fuel pump

20130717_123808 by jarosaj, on Flickr

**Captainfab** · 07-19-2013, 12:54 AM

Actually it is preferable to have the return as far away from the pump as possible so as to not aeriate the fuel, and to give the warm return fuel time to cool down.

**jaros44sr** · 07-19-2013, 11:51 AM

Quote:

Originally Posted by Captainfab

Actually it is preferable to have the return as far away from the pump as possible so as to not aeriate the fuel, and to give the warm return fuel time to cool down.

I agree with you 100%, but wouldnt the engineers at GM have already addressed these issues, seeing this is an oem fuel pump...i cant see any way to move the return line farther away.

Now that you mention it, i will look into the actual function of the pump, as far as where the pick up of fuel is....seems to have a filter sock on the bottom of the basket, so that must be where the fuel is introduced. Then, somehow, it must take it out of the basket, dunno

If it dumps into the basket, before being used to supply fuel to the injecters, it should have time to deaerate, and cool down, but i dont know at what time the fuel is being used from the basket

Ill check it out, and give you an answer

All that being said, i checked out having a tank being made at a cost between 600 and 900, i opted for a new tank and pump in the range of 300, trying to keep the cost down somewhat

**jaros44sr** · 07-20-2013, 10:23 AM

Thanks Dale, just got the parts, they look 100% better then mine

usually im the one sending out free parts, now i have to pay it forward. Gives me something to work on saturday, while i figure out where to buy a 3 1/2" hole saw for the fuel pump retaining ring

A liilte soap and water then a coat of rust converter, and paint. These tank spacers should be good as new

Thanks again....

**jaros44sr** · 07-20-2013, 07:42 PM

20130720_190756 by jarosaj, on Flickr

Happier than a camel on wednesday (hump day)

May be the last of my rust....what a differance between parts from az. and pa. Thanks Dale

**jaros44sr** · 07-20-2013, 10:13 PM

20130720_184933 by jarosaj, on Flickr

Had time to work on the retaining ring. Screwed the plate to some wood, so wouldnt cut into my drillpress base. Used a 3 1/2" holesaw

20130720_190959 by jarosaj, on Flickr

Dale99 · 07-20-2013, 11:32 PM

Glad that they work for you! If you've sent out free parts, you just paid back a little.

**jaros44sr** · 07-21-2013, 10:22 AM

20130721_101336 by jarosaj, on Flickr

Hammer and chisel to start hole, then tin snips. After neck was off tank, blow torch and 7/16" wrench. Hold neck horizonal and let gravity help by flowing old solder away. Repop tank has smaller locating/mounting bolts, so well see how that works out

**jaros44sr** · 07-23-2013, 01:53 PM

Ordered my injectors from fast today, 36 lb@58 psi=331.00. Still working on my order for fuel line 3/8" wall thickness. 035, 90/10 copper nickel

Went to offer up fuel tank and ran into a problem, if i put into stock location, interferance with second to last cross sill, could fix it by sectioning in a piece of flat stock in the middle for about a foot and a half....alot of work!

Second option, body lift of about 1 1/2", alot of work and money!

Third option, relocate tank forward about 1 1/2", required to drill 6 holes, and maybe buy a new fuel filler hose. I think i will opt for 3, but everytime i think of drilling large holes, tom vogel comes to mind with a broken wrist. So, when i use my 3/4" chuck drill ill use the handle adapter and hope i can control the torque...if not the build will halt for awhile, and i will utter several curse words. Man that has got to be painful!

Cant think of any options short of renting a magnetic base drill

Recieved the fuel pump connecter from vette works out in washington state. Only need two leads 12v, and ground, other two will be deleted, they are for the sending unit, and i am using the oem sending unit that came with the tank
Gotta take the connecter apart, and check what pins they use, i want to get rid of any splices

20130723_135557 by jarosaj, on Flickr

notsolo · 07-23-2013, 04:34 PM

Hey Jim a lot of nice machine work just on that ring alone...if I may ask the dumb question whats the problem with the tank install? fuel supply and return lines, ..Also this is going to be a pressure system will an original filler neck seal enough.? Ed.

**jaros44sr** · 07-23-2013, 06:30 PM

Quote:

Originally Posted by notsolo

Hey Jim a lot of nice machine work just on that ring alone...if I may ask the dumb question whats the problem with the tank install? fuel supply and return lines, ..Also this is going to be a pressure system will an original filler neck seal enough.? Ed.

Thanks for the comps., probably my fav. part of the build is working with aluminum. It was done with a bandsaw and drill press

The whole problem with the install is that the pump can only mount in one flat spot on the tank, so all changes have to be made to accomadate that location. The actual lines seem to be the easy part, i can rotate the pump just about 360 degrees, just not aimed at the cross sills

The pump shouldnt build pressure in the tank, as it has a vent system right between the supply and return line fittings. So, there shouldnt be any pressure at the fill cap.

Hope i answered your question. I dont believe there are any dumb questions on this board, if you dont know the answer, then you have to ask the question.....

notsolo · 07-24-2013, 11:31 AM

I am sure You will come up with a good compromise, I put a poly tank in 15 yrs ago, it was loose side to side and I didn't like the way it fit. I added a 1/4" angle 3 x 3 x 8 on both sides and 1/4 rubber mat to cushion it. This moves the tank down 1/2" and gives a little clearance. Short stubby fuel fill on tank got a longer hose. Might be another option to consider.

**jaros44sr** · 07-24-2013, 12:50 PM

Quote:

Originally Posted by notsolo

I am sure You will come up with a good compromise, I put a poly tank in 15 yrs ago, it was loose side to side and I didn't like the way it fit. I added a 1/4" angle 3 x 3 x 8 on both sides and 1/4 rubber mat to cushion it. This moves the tank down 1/2" and gives a little clearance. Short stubby fuel fill on tank got a longer hose. Might be another option to consider.

I am open to all options at this point

, thanks for the info. I believe that is the purpose of the parts Dale gave me, keeps the tank from shifting side to side. Also ordered the rubber pad matrl. from mcmaster-carr. I mght use the thickness of the rubber pad as a way to drop the tank lower....well see, depending on where the fill tube ends up

I think the proper way to tackle this problem is going to be modiying the the second to last cross sill, so, i hope one of our arizona boys have a bed they want to chop up. Doesnt seem that the sill is in repop, i think it is blazer/jimmy specific

**jaros44sr** · 07-30-2013, 12:03 PM

20130730_114138 by jarosaj, on Flickr

Got a couple minutes to work on the retaining ring, now i can just use a transfer punch to referance my holes for the nutserts in the tank. Probably using 6 to mount it up

Still working on the fuel injectors, seems they are more costly then originally planned. Sent the original injectors back to fast

Not sure of these quick connects, reading some bad things

**richard2717** · 07-30-2013, 12:25 PM

Jim
Make sure if you are drilling the holes for nutserts you use the knurled type. If you use the smooth type on anything other than a punched hole they will eventually slip and make it so you cant get the bolt back out. Ask me how I know LOL. McMaster has both kinds.

Richard

**jaros44sr** · 07-30-2013, 12:34 PM

Quote:

Originally Posted by richard2717

Jim
Make sure if you are drilling the holes for nutserts you use the knurled type. If you use the smooth type on anything other than a punched hole they will eventually slip and make it so you cant get the bolt back out. Ask me how I know LOL. McMaster has both kinds.

Richard

Thanks for the heads up Richard, nice to have guys covering your back. Didnt know that, will have to check out mcmaster-carr. I did know that they are to be used on a specific sheet metal thichness

Just ordered my 90/10 fuel line, and 1/4" brake line

07-15-2013, 05:47 PM	#2026
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd ok, I found them plates and ubolt, still in my scrap pile. If you want, just cover shipping and there yours.

07-15-2013, 08:27 PM	#2028
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd There still kinda muddy, but I see no pitting at all. Send me a pm with your addy if you want them and I will get them out in next few days. :Edit: Relooked. It is just starting to get to the points of pitting. But they are still very solid pieces. Last edited by Dale99; 07-15-2013 at 08:43 PM.

07-16-2013, 08:51 AM	#2029
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd Thanks for taking the time, and not going to the scrap yard yet....PM sent __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-16-2013, 09:25 PM	#2030
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd Do you need the ubolt? Its bent, but could possibly be useable.

07-17-2013, 12:28 PM	#2032
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd Just sent out, should have friday. Posted via Mobile Device __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

07-17-2013, 05:42 PM	#2034
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd After thinking about it, I got a box of hardware for free off this site. So I'll pass that along.

07-18-2013, 09:36 AM	#2035
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd 20130717_123126 by jarosaj, on Flickr Had my nephew make a plug for the fuel regulater, was told or read that you dont need to, (gotta be true, if it was on the internet, bonjour)lol, but i thought it would be better to have the return fuel go directly into the basket, as opposed to just shooting all over and some of it going in the basket Got the 1/4" 6061 aluminum plate from McMaster-Carr, for the retaining plate at the fuel pump 20130717_123808 by jarosaj, on Flickr __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 07-18-2013 at 11:20 AM.

07-19-2013, 12:54 AM	#2036
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: PO has me PO'd Actually it is preferable to have the return as far away from the pump as possible so as to not aeriate the fuel, and to give the warm return fuel time to cool down. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-20-2013, 10:23 AM	#2038
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd Thanks Dale, just got the parts, they look 100% better then mine usually im the one sending out free parts, now i have to pay it forward. Gives me something to work on saturday, while i figure out where to buy a 3 1/2" hole saw for the fuel pump retaining ring A liilte soap and water then a coat of rust converter, and paint. These tank spacers should be good as new Thanks again.... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-20-2013, 07:42 PM	#2039
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd 20130720_190756 by jarosaj, on Flickr Happier than a camel on wednesday (hump day) May be the last of my rust....what a differance between parts from az. and pa. Thanks Dale __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 07-20-2013 at 10:06 PM.

07-20-2013, 10:13 PM	#2040
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd 20130720_184933 by jarosaj, on Flickr Had time to work on the retaining ring. Screwed the plate to some wood, so wouldnt cut into my drillpress base. Used a 3 1/2" holesaw 20130720_190959 by jarosaj, on Flickr __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 07-21-2013 at 09:01 AM.

07-20-2013, 11:32 PM	#2041
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: PO has me PO'd Glad that they work for you! If you've sent out free parts, you just paid back a little.

07-21-2013, 10:22 AM	#2042
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd 20130721_101336 by jarosaj, on Flickr Hammer and chisel to start hole, then tin snips. After neck was off tank, blow torch and 7/16" wrench. Hold neck horizonal and let gravity help by flowing old solder away. Repop tank has smaller locating/mounting bolts, so well see how that works out __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-23-2013, 01:53 PM	#2043
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd Ordered my injectors from fast today, 36 lb@58 psi=331.00. Still working on my order for fuel line 3/8" wall thickness. 035, 90/10 copper nickel Went to offer up fuel tank and ran into a problem, if i put into stock location, interferance with second to last cross sill, could fix it by sectioning in a piece of flat stock in the middle for about a foot and a half....alot of work! Second option, body lift of about 1 1/2", alot of work and money! Third option, relocate tank forward about 1 1/2", required to drill 6 holes, and maybe buy a new fuel filler hose. I think i will opt for 3, but everytime i think of drilling large holes, tom vogel comes to mind with a broken wrist. So, when i use my 3/4" chuck drill ill use the handle adapter and hope i can control the torque...if not the build will halt for awhile, and i will utter several curse words. Man that has got to be painful! Cant think of any options short of renting a magnetic base drill Recieved the fuel pump connecter from vette works out in washington state. Only need two leads 12v, and ground, other two will be deleted, they are for the sending unit, and i am using the oem sending unit that came with the tank Gotta take the connecter apart, and check what pins they use, i want to get rid of any splices 20130723_135557 by jarosaj, on Flickr __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 07-23-2013 at 02:05 PM.

07-23-2013, 04:34 PM	#2044
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,481	Re: PO has me PO'd Hey Jim a lot of nice machine work just on that ring alone...if I may ask the dumb question whats the problem with the tank install? fuel supply and return lines, ..Also this is going to be a pressure system will an original filler neck seal enough.? Ed.



Register or Log In To remove these advertisements.

07-24-2013, 11:31 AM	#2046
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,481	Re: PO has me PO'd I am sure You will come up with a good compromise, I put a poly tank in 15 yrs ago, it was loose side to side and I didn't like the way it fit. I added a 1/4" angle 3 x 3 x 8 on both sides and 1/4 rubber mat to cushion it. This moves the tank down 1/2" and gives a little clearance. Short stubby fuel fill on tank got a longer hose. Might be another option to consider.

07-30-2013, 12:03 PM	#2048
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd 20130730_114138 by jarosaj, on Flickr Got a couple minutes to work on the retaining ring, now i can just use a transfer punch to referance my holes for the nutserts in the tank. Probably using 6 to mount it up Still working on the fuel injectors, seems they are more costly then originally planned. Sent the original injectors back to fast Not sure of these quick connects, reading some bad things __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 07-30-2013 at 12:14 PM.

07-30-2013, 12:25 PM	#2049
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,091	Re: PO has me PO'd Jim Make sure if you are drilling the holes for nutserts you use the knurled type. If you use the smooth type on anything other than a punched hole they will eventually slip and make it so you cant get the bolt back out. Ask me how I know LOL. McMaster has both kinds. Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

Register or Log In To remove these advertisements.