|
|
|
08-02-2016, 03:03 AM
|
#1 |
|
Registered User
Join Date: Sep 2013
Location: Kent England
Posts: 1,025
|
Re: Donz '65 SWB Stepper Budget Build...
Well done Don you'll soon have it on the road , and driving it to Clem's this year .
__________________
FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614 |
|
|
|
08-02-2016, 09:47 PM
|
#2 |
|
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: Donz '65 SWB Stepper Budget Build...
After work today, I wrapped the wiring harness feeding the rear in a split loom with the lights wires exiting the rear driver's side frame rail and the Fuel Pump and sending unit wire exiting the loom a bit earlier in the run...
 Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrI also mounted the fuel pump and pulled the rotors so I can turn them at work tomorrow...  Untitled by Donald Olivo, on FlickrAfter some online research, I determined this tank is a LMC offering... Seems it's a 21 gallon side fill version. It was with the truck when purchased and unfortunately, no sender or paperwork can be found... Lastly, I called LMC attempting to figure out what function the fuel tank ports serve... Wasted that phone call as LMC offers ZERO tech support...  This is a photo of the driver's side of the tank... I believe the center port, just to the left of the fill tube is the vent, and the one to the left of that I am unsure of...  Untitled by Donald Olivo, on FlickrThis is a photo of the right side , the small port on the side has me confused... it is directly opposite of the smaller fitting on the Driver's side... Looking through the sender hole I cannot see any tube that would draw from the bottom...  Untitled by Donald Olivo, on FlickrI will be ordering the sender soon and the pic on the website isn't very helpful, but it looks like there is a pickup tube with a screen attached... so any help is appreciated as to the function of these ports...  
__________________
DON Proverbs 27:17  US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
|
|
|
|
08-03-2016, 01:23 PM
|
#3 |
|
Rollin' Old Skool
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
|
Re: Donz '65 SWB Stepper Budget Build...
Man, you're about to be driving this thing...I'm getting excited for you!
__________________
_____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold) |
|
|
|
|
08-04-2016, 06:45 PM
|
#4 |
|
Registered User
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 415
|
Re: Donz '65 SWB Stepper Budget Build...
Hey Don, you're moving right along.
The big port next to the fill is a fill vent that runs up to the fill spout, one of the smaller ports might be a vent port to a canister and the other small port might be a return port. I've not seen your fuel sending unit but some times they have the fuel pick up tube and filter/screen/sock attached. If you're using an in tank fuel pump and sending unit the vent and return may be built into that unit. Good luck on sorting it all out, I know you can do it. Take care.
__________________
Vince Galatians 6:14 62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086 "If it's too loud, you're too old"
|
|
|
|
|
08-08-2016, 05:58 PM
|
#5 |
|
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: Donz '65 SWB Stepper Budget Build...
Thanx Guyz!!!
 Another few items either finished or nearing completion... This weekend found me focusing on Brakes... It's good to be able to stop...  I started off by getting the Front brakes finished up first, earlier in the week I turned the rotors and then after re-installing them I modified (Bent) the hoses. They had a 90 degree bend which had them pointing directly into the Upper Ball joint thanks to the 2 1/2" Drop Spindles...  Some Vise grips and an arm work out have them now mounted and bolted in place...  Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrNew pads installed...  Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrYesterday, after getting the second caliper bolted in place, a typical afternoon thunderstorm kicked up stopping the rear brake work... The rears had to be done with the truck in the Sunshine... Today my focus was getting the rear brakes complete and ready to bleed the system... Here's the second rebuilt Drum set up just before re-installing Drum and Tire...  Untitled by Donald Olivo, on FlickrSo, after a trip into town for some parts I neglected to purchase, fuel line, and a hose to connect the Booster... JoJo and I spotted a hawk with a fresh kill along the road...  Untitled by Donald Olivo, on FlickrJust after I snapped that pic, JoJo decided to bark... and the hawk flew into the trees...  Untitled by Donald Olivo, on FlickrBooster hose in place...  Untitled by Donald Olivo, on FlickrTruck getting some rays...  Untitled by Donald Olivo, on FlickrA while back, a year or more, MarkeB01 offered some parts for the asking... He listed the items up for grabs and after all was said and done he hooked me up with a few items, including a fuel pressure regulator gauge as well as an isolator... Here's the gauge in it's temporary home under the dash...  Untitled by Donald Olivo, on FlickrI still need to grab some fittings to finish the install... Thanks Again Mark!!! Brakes are ready to be bled, so is the clutch hydraulic system... Closer and Closer...  Ordering my Fuel Sending unit soon, still need to get another alternator too... 
__________________
DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
|
|
|
|
08-08-2016, 06:01 PM
|
#6 |
|
Registered User
Join Date: Sep 2013
Location: Strawberry Arkansas
Posts: 1,137
|
Re: Donz '65 SWB Stepper Budget Build...
Your kicking it Brother!!!
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=605217 |
|
|
|
|
08-08-2016, 06:17 PM
|
#7 |
|
Registered User
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
|
Re: Donz '65 SWB Stepper Budget Build...
Looking good Don! I can't wait to see you scootin around.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC |
|
|
|
|
08-08-2016, 09:03 PM
|
#8 |
|
Post Whore
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: Donz '65 SWB Stepper Budget Build...
Diggin the progress brotha!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
|
08-09-2016, 02:07 AM
|
#9 |
|
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,511
|
Re: Donz '65 SWB Stepper Budget Build...
Brilliant pics of the Kestrel Don, thank you for sharing.
That made my day yesterday. Great storming progress again.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
|
|
|
08-09-2016, 05:10 AM
|
#10 |
|
State of Confusion!
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,761
|
Re: Donz '65 SWB Stepper Budget Build...
Looking good Don!
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
08-09-2016, 06:32 PM
|
#11 |
|
Registered User
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 415
|
Re: Donz '65 SWB Stepper Budget Build...
You and your truck will be on the road soon.
Looking Good, Keep on Truckin'
__________________
Vince Galatians 6:14 62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086 "If it's too loud, you're too old"
|
|
|
|
|
08-09-2016, 10:12 PM
|
#12 |
|
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: Donz '65 SWB Stepper Budget Build...
Excellent progress
|
|
|
|
|
08-21-2016, 04:24 PM
|
#13 | |||||||
|
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
After 8 straight days with rain... we finally got a couple of days that are forecast to be rain free as well as cooler and drier air...Getting' some truck time in, so update later... Here's the temp at 2pm this afternoon in the shed... not 100F Untitled by Donald Olivo, on Flickr
__________________
DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD Last edited by Ta2Don; 08-21-2016 at 04:25 PM. Reason: add pic |
|||||||
|
|
|
|
08-21-2016, 05:45 PM
|
#14 |
|
Registered User
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 415
|
Re: Donz '65 SWB Stepper Budget Build...
We have sun shine and cool weather, the coolest in a long time for August.
My wife and went for a walk and then for a swim this after noon. The water is very cool and the water level is very high in the lake for this time of year. No complaints from me. Always good to hear you are getting in some truck time.
__________________
Vince Galatians 6:14 62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086 "If it's too loud, you're too old"
|
|
|
|
|
08-21-2016, 06:56 PM
|
#15 |
|
Registered User
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
|
Re: Donz '65 SWB Stepper Budget Build...
Forty plus days of 90s. Stupid humidity and rain almost every afternoon. Must be one of the hottest summers I can recall. It's supposed to cool down to the 80s the first part of the week and back to the 90s.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC |
|
|
|
|
08-22-2016, 12:32 AM
|
#16 |
|
Post Whore
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: Donz '65 SWB Stepper Budget Build...
I think you gave us the hot weather brotha...been over 100 here the past few days. Monday was around 105! lol
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
|
08-22-2016, 03:49 PM
|
#17 | |||
|
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
Enjoying it immensely...Quote:
Quote:
Sorry!!!
__________________
DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
|||
|
|
|
|
08-22-2016, 04:08 PM
|
#18 |
|
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: Donz '65 SWB Stepper Budget Build...
Hey Guyz...
Yesterday and part of today has been spent working on the Gas door modification... I also ordered my Fuel sender from LMC, so soon, very soon, I should be able to hop in twist the key and move this beast under it's own power...I started off cutting the Fuel door from the Squarebody bed I acquired...Sorry Squarebody guys!!!  Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrI then began the process of cleaning, repairing and installing on the Stepper's L/Stepside Fender... Here's a shot after removing the hoses and starting the cleaning process...  Untitled by Donald Olivo, on FlickrFound some rust that needed to be repaired...  Untitled by Donald Olivo, on FlickrLet the games begin...  Untitled by Donald Olivo, on FlickrPatch welded in, Parts painted that could be before welding in..., and new Locking Gas Cap...  Untitled by Donald Olivo, on FlickrHere's a closer shot of repaired area...  Untitled by Donald Olivo, on FlickrNext step... Mark and cut Fender...  Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrForgot to get pic of hole cut in fender... ...but, here's the Welding getting started...  Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrStill gotta grind and get back in primer, door is just set in to see what it's gonna look like...  Untitled by Donald Olivo, on FlickrI know, it's opening to the rear, but on the donor, it was on the Passenger side and my tank fills on the Driver's side, so... Spotted this one Saturday while working, shot this pic earlier today on a run into town... I think I've talked with this guy before, not sure though...  Untitled by Donald Olivo, on FlickrWill post more after grinding and body work finished... Laterz...
__________________
DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
|
|
|
|
08-22-2016, 04:29 PM
|
#19 |
|
Senior Member
Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: Donz '65 SWB Stepper Budget Build...
very cool gas filler bro...
thinkin' maybe you're like me... wishing that August and Sept. had 41 days instead of 31 so we could have more done by October. Right there with you buddy... thrashin' on a deadline. I like the push but we have a lot of important distractions... make it or not, we sure will get alot done under the gun. push on my friend... |
|
|
|
|
08-28-2016, 09:20 PM
|
#20 | |
|
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: Donz '65 SWB Stepper Budget Build...
Quote:
__________________
DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
|
|
|
|
|
08-28-2016, 09:32 PM
|
#21 |
|
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: Donz '65 SWB Stepper Budget Build...
More truck time today...
Purchased the filler hose, vent hose, clamps and other assorted goodies this week, installed the Fuel level sender, hooked up hoses and electrics... and with the help of a friend and his 2 boys, we set the bed on... Starting to snowball towards a running driving truck...  On to the pics...  Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrHoses hooked up and the bed to frame ground strap installed...  Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrBed on...  Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on Flickr Untitled by Donald Olivo, on FlickrRockin' along... 
__________________
DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
|
|
|
|
08-28-2016, 09:51 PM
|
#22 |
|
Registered User
Join Date: Sep 2012
Location: Leander, TX
Posts: 969
|
Re: Donz '65 SWB Stepper Budget Build...
Looks good Don. Now get all that front sheet metal on.
Bret
__________________
64' Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=586955 |
|
|
|
|
08-28-2016, 11:23 PM
|
#23 |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,440
|
Re: Donz '65 SWB Stepper Budget Build...
Bed looks great on there.
|
|
|
|
|
08-28-2016, 11:35 PM
|
#24 |
|
Registered User
Join Date: Aug 2014
Location: oklahoma
Posts: 357
|
Re: Donz '65 SWB Stepper Budget Build...
Lookin good Don!
__________________
You can find me on Instagram @neveno_cten |
|
|
|
|
08-29-2016, 12:57 AM
|
#25 |
|
Post Whore
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: Donz '65 SWB Stepper Budget Build...
That really looks sweet brotha! Diggin the progress! I'll catch up eventually.
Still fighting the GMC at this point.  But getting closer.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
 |
| Bookmarks |
| Tags |
| 65 swb, c10, step side, tattoo |
|
|
Hybrid Mode
