Finally "Silvers" build thread!! ('78 swb 2wd silverado) - Page 83 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JNJchev77 · 11-04-2010, 07:50 PM

That's a smokin deal!

palposity · 11-04-2010, 08:42 PM

Sorry you had to buy new calipers, but it sounds like you made a good choice for replacements! Look forward to some pics!

Driveway Dreams · 11-05-2010, 12:08 AM

Pssssstt! I still need pictures. "The proof is in the pudding" my friend. I will be waiting for that text on Monday.

Posted via Mobile Device

**nlped** · 11-05-2010, 07:48 AM

Dennis,

You're most welcome...

81C10LS3 · 11-06-2010, 12:52 AM

Dennis, any chance you're selling those old calipers?

menace121978 · 11-06-2010, 06:33 AM

i havent really thought about it... they are just the stock D52's that have been ground down and smoothed and painted. 1 of the 4 is stripped where the banjo bolt screws into. and i just went out and took a look at them and there's a few spots the paint has bubbled from the fluid.

54Caddy · 11-06-2010, 07:46 PM

dennis did the wilwood master cylinder bolt right up to the stock booster have a p/n for it im looking into doing all wilwood also, Master cylinder, calipers, pads, and proportioning valve.

menace121978 · 11-06-2010, 08:16 PM

yep they bolt right up man. the m/c part # is 260-8556-bk. the front and rear calipers # 140-11290-bk & 140-11292-bk. let me know if your serious cause the stuffs not cheap and i'll hook you up with the guy up here.

v502 · 11-06-2010, 08:22 PM

Quote:

Originally Posted by menace121978

yep they bolt right up man. the m/c part # is 260-8556-bk. the front and rear calipers # 140-11290-bk & 140-11292-bk. let me know if your serious cause the stuffs not cheap and i'll hook you up with the guy up here.

Where is the Pics ?

Its been a while but looking good buddy

menace121978 · 11-06-2010, 08:26 PM

the calipers aren't here yet... hopefully monday i'll have ya some pics!!!

v502 · 11-06-2010, 08:40 PM

Quote:

Originally Posted by menace121978

the calipers aren't here yet... hopefully monday i'll have ya some pics!!!

I goggled them i sure like the black d52 one's better than the red one's. Great choice investing money on brake's are never a bad thing.

54Caddy · 11-06-2010, 10:17 PM

from what i have priced it will be about 1000 for the master cylinder and red calipers. But that is without the wilwood pads, and proportioning valve. How much is it all costing you??

81C10LS3 · 11-06-2010, 11:44 PM

Dennis, where did you get the bulkhead fitting for the front brakes that penetrates the frame rail?

menace121978 · 11-07-2010, 09:23 AM

Quote:

Originally Posted by 81C10LS3

Dennis, where did you get the bulkhead fitting for the front brakes that penetrates the frame rail?

are you talking about the rubber line and fitting that goes through the frame rail? if so i just have the line and then i screwed on a huge grade 8 nut instead of the cheesy fake nut from the factory. looks a lot better because the nut is flush with the end of the fitting.

menace121978 · 11-07-2010, 09:30 AM

Quote:

Originally Posted by 54Caddy

from what i have priced it will be about 1000 for the master cylinder and red calipers. But that is without the wilwood pads, and proportioning valve. How much is it all costing you??

are you going with disc in the rear also?? if so you'll need captianfab's brackets. i'm going to probably have to modify mine for the wilwoods calipers. like i said before the loaded front and rear calipers is costing me $700... thats with the wilwood BP-10 pads. that should give you and idea of the deal i can get.

54Caddy · 11-07-2010, 11:21 AM

i was planing on going disc in the rear also with the same kit you bought just without the calipers. Why are you going to have to modify your brackets if the brackets you have are for the d52 caliper??

menace121978 · 11-07-2010, 11:40 AM

idk for sure yet... if you look at captfabs thread you will see. maybe i'll get lucky though

menace121978 · 11-07-2010, 11:24 PM

got the gauges installed finally! thank you Jeff!! did a nice little write-up also

http://67-72chevytrucks.com/vboard/s...=1#post4283210

*Stitch* · 11-07-2010, 11:24 PM

looks great man...

menace121978 · 11-07-2010, 11:30 PM

thanks buddy!!! been a long time coming

i still feel like i haven't accomplished anything for some reason... maybe after i get the calipers on and bled i'll feel better

*nbpro* · 11-08-2010, 01:50 AM

Coming right along keep up the good work

mcbassin · 11-08-2010, 08:45 AM

That setup looks great! Love those high $$ gauges!

JohnC · 11-08-2010, 11:07 AM

Gauges look sweet man!

cochino12 · 11-08-2010, 11:21 AM

They turned out great! Let me know when you will be in Denver and I'll let you do some for me too

silvereagle07 · 11-08-2010, 03:16 PM

Looks great Dennis.

11-04-2010, 07:50 PM	#2051
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) That's a smokin deal!

11-04-2010, 08:42 PM	#2052
palposity Registered User Join Date: Sep 2009 Location: Syracuse NY Posts: 684	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Sorry you had to buy new calipers, but it sounds like you made a good choice for replacements! Look forward to some pics! __________________ Project #1 "Pops"--1980 Chevrolet Scottsdale C10 3rd Generation in the same original owner family. GOAL: Restore to "almost" original. View Project Pops HERE Project #2 "Cletus"--1986 Chevy K20 4.10 Gear Ratio GOAL: Restore into a heavy duty work/plow rig View Project Cletus HERE - SOLD DD--2008 Duramax CCSB Last edited by palposity; 11-04-2010 at 08:42 PM.

11-05-2010, 12:08 AM	#2053
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Pssssstt! I still need pictures. "The proof is in the pudding" my friend. I will be waiting for that text on Monday. Posted via Mobile Device __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

11-05-2010, 07:48 AM	#2054
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Dennis, You're most welcome... __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-06-2010, 12:52 AM	#2055
81C10LS3 Registered User Join Date: Jun 2010 Location: Slidell, La Posts: 38	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Dennis, any chance you're selling those old calipers?

11-06-2010, 06:33 AM	#2056
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) i havent really thought about it... they are just the stock D52's that have been ground down and smoothed and painted. 1 of the 4 is stripped where the banjo bolt screws into. and i just went out and took a look at them and there's a few spots the paint has bubbled from the fluid. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-06-2010, 07:46 PM	#2057
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) dennis did the wilwood master cylinder bolt right up to the stock booster have a p/n for it im looking into doing all wilwood also, Master cylinder, calipers, pads, and proportioning valve. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

11-06-2010, 08:16 PM	#2058
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) yep they bolt right up man. the m/c part # is 260-8556-bk. the front and rear calipers # 140-11290-bk & 140-11292-bk. let me know if your serious cause the stuffs not cheap and i'll hook you up with the guy up here. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-06-2010, 08:26 PM	#2060
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) the calipers aren't here yet... hopefully monday i'll have ya some pics!!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-06-2010, 10:17 PM	#2062
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) from what i have priced it will be about 1000 for the master cylinder and red calipers. But that is without the wilwood pads, and proportioning valve. How much is it all costing you?? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage Last edited by 54Caddy; 11-06-2010 at 10:20 PM.

11-06-2010, 11:44 PM	#2063
81C10LS3 Registered User Join Date: Jun 2010 Location: Slidell, La Posts: 38	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Dennis, where did you get the bulkhead fitting for the front brakes that penetrates the frame rail?

11-07-2010, 11:21 AM	#2066
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) i was planing on going disc in the rear also with the same kit you bought just without the calipers. Why are you going to have to modify your brackets if the brackets you have are for the d52 caliper?? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

11-07-2010, 11:40 AM	#2067
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) idk for sure yet... if you look at captfabs thread you will see. maybe i'll get lucky though __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-07-2010, 11:24 PM	#2068
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) got the gauges installed finally! thank you Jeff!! did a nice little write-up also http://67-72chevytrucks.com/vboard/s...=1#post4283210 Attached Images __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-07-2010, 11:24 PM	#2069
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) looks great man...



Register or Log In To remove these advertisements.

11-07-2010, 11:30 PM	#2070
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) thanks buddy!!! been a long time coming i still feel like i haven't accomplished anything for some reason... maybe after i get the calipers on and bled i'll feel better __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

11-08-2010, 01:50 AM	#2071
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Coming right along keep up the good work

11-08-2010, 08:45 AM	#2072
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) That setup looks great! Love those high $$ gauges! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 11-08-2010 at 09:11 AM.

11-08-2010, 11:07 AM	#2073
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Gauges look sweet man!

11-08-2010, 11:21 AM	#2074
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) They turned out great! Let me know when you will be in Denver and I'll let you do some for me too __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

11-08-2010, 03:16 PM	#2075
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Looks great Dennis. __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

Register or Log In To remove these advertisements.