Daverods project 66 - Page 84 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 01-07-2011, 10:06 PM

Sprayed a bunch of bedliner in my doors and panels. Covered the panels with pea-ln-seal. Made them weight a bunch more should work good.

Got my lower ball joint pressed in. Now gotta put it all back together. Ordered all new shocks and relocating hardware from cpp. Delux shock kit.

Almost on the road again. Had to order a pressure swich for the accuair stuff. Can't believe it does'nt come with the kit.

watahyahknow · 01-07-2011, 11:11 PM

i would think a pressureswitch and a relay is included with the electric pumps

Strodder · 01-07-2011, 11:50 PM

Yeah that kit cost enough.

daverod · 01-08-2011, 01:03 AM

Quote:

Originally Posted by watahyahknow

i would think a pressureswitch and a relay is included with the electric pumps

I got one with the compressors but you need a special one for the accuair. They hit you up for another 50.

daverod · 01-08-2011, 01:07 AM

Quote:

Originally Posted by Strodder

Yeah that kit cost enough.

It so easy though. Even a caveman could do it.

I'll bet by the time you add up all the valves and wiring and time it's not a hell of more. Looks a lot cleaner. Oh ya and it's smarter.

And I can add on to it later.

watahyahknow · 01-08-2011, 02:17 AM

i've seen a verry nice kit a while back it was a cage with a tank a compressor the valves and the switches allready installed inside a plastic cover in only needed a 12v hookup and all the lines to the 4 corners http://www.dreamershotrods.com/image...oductId=367425
they call it the airpod

daverod · 01-08-2011, 10:55 AM

I looked at that one. I already had my tank and compressors though. I liked the idea of a big tank and dual compressors.

ruffrida2005 · 01-08-2011, 03:34 PM

I still got to send you a couple wires that I found. I'll try to get them in the mail box today

daverod · 01-08-2011, 03:52 PM

Quote:

Originally Posted by ruffrida2005

I still got to send you a couple wires that I found. I'll try to get them in the mail box today

Thanks Paul. I'm going to try and get my cab on this weekend.

See if I can do it without scratching it.

Where's the s10 build?

ruffrida2005 · 01-08-2011, 04:07 PM

I haven't messed with it yet. I'll try to get on it this coming week. Been busy with the house. and I'm not ready to work on the bag set up.

Been dealing with the VA. I finally got my rating lastnight. I got a bunch of appts. and this is my DD.

daverod · 01-10-2011, 12:58 AM

Did some rattle can on my arms. Got the joints press in. Put it all back together. Found a bigger sway bar in my garage so I replace the one I had. Waiting on my front and rear shocks. Also got the shock relocating stuff.

daverod · 01-10-2011, 01:04 AM

Quote:

Originally Posted by ruffrida2005

i haven't messed with it yet. I'll try to get on it this coming week. Been busy with the house. And i'm not ready to work on the bag set up.

Been dealing with the va. I finally got my rating lastnight. I got a bunch of appts. And this is my dd.

dd?

BigPhil66 · 01-10-2011, 01:13 AM

Looking good...did you press in the ball joints yourself?

ruffrida2005 · 01-10-2011, 01:21 AM

Daily Driver, Or soon to be Daily Dragger.

daverod · 01-10-2011, 11:08 AM

Quote:

Originally Posted by BigPhil66

Looking good...did you press in the ball joints yourself?

No took them to a shop $30.

Strodder · 01-10-2011, 11:45 AM

Quote:

Originally Posted by daverod

Did some rattle can on my arms. Got the joints press in. Put it all back together. Found a bigger sway bar in my garage so I replace the one I had. Waiting on my front and rear shocks. Also got the shock relocating stuff.

What kind of front air bag set up are you using? The lower bag mount will screw up that nice paint.

daverod · 01-10-2011, 03:06 PM

For now I'm just going with the hacked springs. Later I'll get lowered spindles and shorty exhaust. It's pretty low now with the spindles it will drag my exhaust.

The paint cost about $5 and took about 5min.

Now the cleaning is a different story.

Strodder · 01-10-2011, 05:00 PM

Cleaning is everything. I spent over a week cleaning the 57 Sedan Delivery I'm working on. I did the front part of the frame, and suspension. It was a mess. Then I made more of a mess with the sand blaster.

ruffrida2005 · 01-10-2011, 05:19 PM

What kind of paint did you use on that?

daverod · 01-10-2011, 08:50 PM

Quote:

Originally Posted by ruffrida2005

What kind of paint did you use on that?

Rustolum pro enamel gloss black. Big can is $6.

daverod · 01-12-2011, 12:00 AM

Drilled some holes/ran my air lines. Surprised how good my little hf drill bit worked.

**Bugeyev8** · 01-12-2011, 02:07 AM

Quote:

Originally Posted by daverod

Drilled some holes/ran my air lines. Surprised how good my little hf drill bit worked.

Yeah those unibit rip offs work great !!

watahyahknow · 01-12-2011, 05:00 AM

been to a factory in germany once from mahle
the productionrun was for mercedes pistons and they each had the little logo stamped into them
after that they did a run for imitation/aftermarket pistons .......... they took out the logostamp and continued production
for some stuff you only pay extra for the logo

Strodder · 01-12-2011, 10:54 AM

Any one know how to sharpen those unibits?

daverod · 01-12-2011, 11:22 AM

Why sharpen them . Just keep your reciept and go get a new one. I broke the first one I had. They are brittle. I just returned it. Guaranteed for life.

01-07-2011, 10:06 PM	#2076
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Sprayed a bunch of bedliner in my doors and panels. Covered the panels with pea-ln-seal. Made them weight a bunch more should work good. Got my lower ball joint pressed in. Now gotta put it all back together. Ordered all new shocks and relocating hardware from cpp. Delux shock kit. Almost on the road again. Had to order a pressure swich for the accuair stuff. Can't believe it does'nt come with the kit. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 01-07-2011 at 10:09 PM.

01-07-2011, 11:11 PM	#2077
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 i would think a pressureswitch and a relay is included with the electric pumps __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

01-07-2011, 11:50 PM	#2078
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Yeah that kit cost enough. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

01-08-2011, 02:17 AM	#2081
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 i've seen a verry nice kit a while back it was a cage with a tank a compressor the valves and the switches allready installed inside a plastic cover in only needed a 12v hookup and all the lines to the 4 corners http://www.dreamershotrods.com/image...oductId=367425 they call it the airpod __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 01-08-2011 at 02:18 AM.

01-08-2011, 10:55 AM	#2082
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I looked at that one. I already had my tank and compressors though. I liked the idea of a big tank and dual compressors. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

01-08-2011, 03:34 PM	#2083
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 I still got to send you a couple wires that I found. I'll try to get them in the mail box today __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-08-2011, 04:07 PM	#2085
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 I haven't messed with it yet. I'll try to get on it this coming week. Been busy with the house. and I'm not ready to work on the bag set up. Been dealing with the VA. I finally got my rating lastnight. I got a bunch of appts. and this is my DD. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-10-2011, 12:58 AM	#2086
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Did some rattle can on my arms. Got the joints press in. Put it all back together. Found a bigger sway bar in my garage so I replace the one I had. Waiting on my front and rear shocks. Also got the shock relocating stuff. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 01-10-2011 at 01:02 AM.

01-10-2011, 01:13 AM	#2088
BigPhil66 Registered User Join Date: Aug 2010 Location: Riverside Ca. Posts: 47	Re: Daverods project 66 Looking good...did you press in the ball joints yourself?

01-10-2011, 01:21 AM	#2089
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Daily Driver, Or soon to be Daily Dragger. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-10-2011, 03:06 PM	#2092
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 For now I'm just going with the hacked springs. Later I'll get lowered spindles and shorty exhaust. It's pretty low now with the spindles it will drag my exhaust. The paint cost about $5 and took about 5min. Now the cleaning is a different story. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 01-10-2011 at 03:08 PM.

01-10-2011, 05:00 PM	#2093
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Cleaning is everything. I spent over a week cleaning the 57 Sedan Delivery I'm working on. I did the front part of the frame, and suspension. It was a mess. Then I made more of a mess with the sand blaster. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 01-10-2011 at 05:01 PM.

01-10-2011, 05:19 PM	#2094
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 What kind of paint did you use on that? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-12-2011, 12:00 AM	#2096
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Drilled some holes/ran my air lines. Surprised how good my little hf drill bit worked. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 01-12-2011 at 12:01 AM.

01-12-2011, 05:00 AM	#2098
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 been to a factory in germany once from mahle the productionrun was for mercedes pistons and they each had the little logo stamped into them after that they did a run for imitation/aftermarket pistons .......... they took out the logostamp and continued production for some stuff you only pay extra for the logo __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts



Register or Log In To remove these advertisements.

01-12-2011, 10:54 AM	#2099
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Any one know how to sharpen those unibits? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

01-12-2011, 11:22 AM	#2100
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Why sharpen them . Just keep your reciept and go get a new one. I broke the first one I had. They are brittle. I just returned it. Guaranteed for life. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

Register or Log In To remove these advertisements.