** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 85 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Sleeper · 10-31-2011, 11:39 PM

Goes to show...There is always more than one way to skin a cat.

**67cheby** · 11-01-2011, 09:35 AM

you my friend are a PROBLEM SOLVER !!

thor · 11-01-2011, 01:34 PM

time for video of e-brake slides

ha, ha

**Dieselwrencher** · 11-01-2011, 01:43 PM

Great work and ingenuity!

drewskiren · 11-01-2011, 10:46 PM

And on tonight's episode of As The Wrench Turns, we have a bed that got mounted and a little shot-o-bling.

noonzor · 11-01-2011, 11:05 PM

very nice!

**67cheby** · 11-01-2011, 11:35 PM

looking good !!

**Dieselwrencher** · 11-01-2011, 11:42 PM

Very nice!

VA72C10 · 11-01-2011, 11:51 PM

Looking good.....although you really need to clean your bed

71Sleeper · 11-01-2011, 11:55 PM

Quote:

Originally Posted by VA72C10

Looking good.....although you really need to clean your bed

I got the same advice on mine to.

VA72C10 · 11-02-2011, 12:01 AM

BTW....you're nearing #1 on the views.....231K+ as of tonight!

**67cheby** · 11-02-2011, 09:28 AM

i know it is a little petty thing but with the work you have put in , i think those bolts through the bed floor need to have a round head instead of the hex head to blend in better, maybe a round allen headed bolt ?

drewskiren · 11-02-2011, 09:45 AM

Quote:

Originally Posted by 67cheby

i know it is a little petty thing but with the work you have put in , i think those bolts through the bed floor need to have a round head instead of the hex head to blend in better, maybe a round allen headed bolt ?

I agree completely, but since the bed floor is so rough I am rhino-lining and covering the whole thing up with a rubber mat. Since it has to be covered up anyway, bolt heads don't really matter.

Since I am planning on using the truck, I figured it was insane to spend $1000 on a bed floor and then worry about denting or scratching it. Yes, I hope the truck is magazine worthy, but that is a secondary consideration to my using it everyday.

jb1016 · 11-02-2011, 11:36 AM

Quote:

Originally Posted by drewskiren

Yes, I hope the truck is magazine worthy, but that is a secondary consideration to my using it everyday.

Quote:

Originally Posted by VA72C10

231K+ as of tonight!

The fact that you plan to use it is the best part of the build. I hope you get to put as many miles on it as the build has had views!

drewskiren · 11-03-2011, 01:32 AM

Tonight's episode begins with painting the radiator support and new radiator mount satin black. A few more coats tomorrow and it will be ready to assemble.

Then I moved on to the shift linkage. I welded and extension on the shift ear I cut off to clear the brake booster, then assembled the Kugal stainless steel shift linkage. http://www.kugelkomponents.com/zenca...&products_id=6

I very carefully fit and adjusted, then shortened the rod twice so as not to cut too much off at once. The throw is now perfect and I get all gears to click nicely, it even lines up on the column indicator right.

Then I read the wiring diagram and ended up only needing one wire on the right electrical block -green temp sensor wire for gauge. I may want the switched brown wire for something, so I left it for now.

**Dieselwrencher** · 11-03-2011, 01:50 AM

Little by little.

drewskiren · 11-03-2011, 01:58 AM

Quote:

Originally Posted by Dieselwrencher

Little by little.

Exactly.

VA72C10 · 11-03-2011, 02:36 AM

More good progress. Shift linkage looks good as does the rad support!

71Sleeper · 11-03-2011, 02:51 AM

Quote:

Originally Posted by Dieselwrencher

Little by little.

And soon there will be little to do.

72shortstep · 11-03-2011, 04:34 AM

Are you keeping the mechanical fan or going with an electric set-up? sorry if you already answered this but that chip in the fan blade made me think about it, haha.

drewskiren · 11-03-2011, 09:07 AM

Quote:

Originally Posted by 72shortstep

Are you keeping the mechanical fan or going with an electric set-up?

Mechanical, because it is free and installed!

drewskiren · 11-03-2011, 04:26 PM

These pics are more fun to look at.

Where do these little square rubber blocks go? They came with my tailgate bumpers kit.

**67cheby** · 11-03-2011, 04:58 PM

SWEET they are bumpers for the tailgate !!

drewskiren · 11-03-2011, 05:00 PM

Quote:

Originally Posted by 67cheby

SWEET they are bumpers for the tailgate !!

Where?? got a picture?

Pop's C-10 · 11-03-2011, 05:01 PM

Have you thought about doing tha stop light mod that i've seen on here using that factory cargo light..

10-31-2011, 11:39 PM	#2101
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Goes to show...There is always more than one way to skin a cat. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

11-01-2011, 09:35 AM	#2102
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. you my friend are a PROBLEM SOLVER !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-01-2011, 01:34 PM	#2103
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. time for video of e-brake slides ha, ha __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

11-01-2011, 01:43 PM	#2104
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Great work and ingenuity! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-01-2011, 10:46 PM	#2105
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. And on tonight's episode of As The Wrench Turns, we have a bed that got mounted and a little shot-o-bling. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-01-2011, 11:05 PM	#2106
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. very nice! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

11-01-2011, 11:35 PM	#2107
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. looking good !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-01-2011, 11:42 PM	#2108
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Very nice! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-01-2011, 11:51 PM	#2109
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking good.....although you really need to clean your bed __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-02-2011, 12:01 AM	#2111
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. BTW....you're nearing #1 on the views.....231K+ as of tonight! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-02-2011, 09:28 AM	#2112
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. i know it is a little petty thing but with the work you have put in , i think those bolts through the bed floor need to have a round head instead of the hex head to blend in better, maybe a round allen headed bolt ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-03-2011, 01:32 AM	#2115
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Tonight's episode begins with painting the radiator support and new radiator mount satin black. A few more coats tomorrow and it will be ready to assemble. Then I moved on to the shift linkage. I welded and extension on the shift ear I cut off to clear the brake booster, then assembled the Kugal stainless steel shift linkage. http://www.kugelkomponents.com/zenca...&products_id=6 I very carefully fit and adjusted, then shortened the rod twice so as not to cut too much off at once. The throw is now perfect and I get all gears to click nicely, it even lines up on the column indicator right. Then I read the wiring diagram and ended up only needing one wire on the right electrical block -green temp sensor wire for gauge. I may want the switched brown wire for something, so I left it for now. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-03-2011, 01:50 AM	#2116
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Little by little. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-03-2011, 02:36 AM	#2118
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. More good progress. Shift linkage looks good as does the rad support! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-03-2011, 04:34 AM	#2120
72shortstep lovin' the lowcountry Join Date: Apr 2010 Location: Moncks Corner, SC Posts: 138	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Are you keeping the mechanical fan or going with an electric set-up? sorry if you already answered this but that chip in the fan blade made me think about it, haha. __________________ Chris 29461 72 SWB stepside 71 SWB stepside DRIVE IT LIKE YOU STOLE IT!



Register or Log In To remove these advertisements.

11-03-2011, 04:26 PM	#2122
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. These pics are more fun to look at. Where do these little square rubber blocks go? They came with my tailgate bumpers kit. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-03-2011, 04:58 PM	#2123
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. SWEET they are bumpers for the tailgate !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-03-2011, 05:01 PM	#2125
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Have you thought about doing tha stop light mod that i've seen on here using that factory cargo light.. __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

Register or Log In To remove these advertisements.