Daverods project 66

[Strodder]

I didn't know that. Where did you buy them?

[daverod]

hf. Harbor freight. Keep your reciept for anything you buy there though.

[Strodder]

KEWL. That's my favorite place.

[watahyahknow]

if you dont have the receipt just buy the exact same thing again walk out and back in again with the busted part and if they ask tell them it fell apart within a second
you then have two new ones ...... if you lost the reciept you had to buy the part again anyway
done that a few times when i was low on cash on stuff like electric heaters , works good if you lost the original box to return it in as whell

[scotts62]

thats just wrong

[ruffrida2005]

Originally Posted by scotts62

thats just wrong

You need to take a look at your Avatar.

Those unibits do suck though. I bought the 3pc kit. and broke all 3 drilling through my frame. didn't know I could take them back.

[scotts62]

Originally Posted by ruffrida2005

You need to take a look at your Avatar.

Those unibits do suck though. I bought the 3pc kit. and broke all 3 drilling through my frame. didn't know I could take them back.

Thanks for reminding me about the avatar, forgot what it said

[daverod]

Originally Posted by ruffrida2005

You need to take a look at your Avatar.

Those unibits do suck though. I bought the 3pc kit. and broke all 3 drilling through my frame. didn't know I could take them back.

You would think you would learn to go slow after u broke the first one.

[daverod]

Originally Posted by Strodder

KEWL. That's my favorite place.

Mine too.
I had to run out of there the other day almost bought a big sandblasting cab. Ended up just getting what I went there for. A air hammer. One of the few times I made it out without spending a bill.

[ruffrida2005]

Are you a insider club member, if not You need to get in on it. Cost I think $25 and you can save a lot of money. Some stuff goes 50%-70% just for being a member.

[daverod]

I'll have to check it next time I'm in there. Should be in a couple hours or so.

[bubba327]

I get in A LOT of trouble at HF. I start in shopping and pretty quick I have a cart or two full of stuff I cannot live without.
I live probably 25 miles away from the store and since I do not get on that side of town that often, I tend to stock up on essentials when I am there.

Mainly stuff like grinder discs and cut-off wheels and wire brushes, air tools and pretty quick I am in deep dept again.
Much Safer if I do not go too often.

[ruffrida2005]

Inside track club member. You get stuff a lot cheaper.

[Strodder]

When you get the paper with all the sales on it, you have to bring that coupon with you.

[daverod]

Originally Posted by Strodder

When you get the paper with all the sales on it, you have to bring that coupon with you.

Got it.

[daverod]

Mounted some stuff up. Got my pressure sensor, did'nt have the right fitting. I was hoping to go up and down.Guess I'll have to mount a 5 gal bucket on there somewhere. Need to get my other truck back together so I can get it out of there and get my cab on. Where are my shocks.

[Strodder]

I hope your not expecting fast bags using 1/4" air lines? What size valves are you using?

[daverod]

Originally Posted by strodder

i hope your not expecting fast bags using 1/4" air lines? What size valves are you using?

3/8" I've had it hooked up to my air compressor in my garage. It goes up pretty fast. I heard 1/2 was to much. You can adjust how fast or slow on the accair switch control. I think I'll switch my tank around so all the holes/plugs are in front. Might look better. Tried to hide all the parts, so thet don't walk off. I think I'll build a old looking box to cover it all.

[Strodder]

I'm going to use 1/2" because that's what I have left over from the shop I closed. I already have 2 air bags, 1 compressor, all the fittings, 8 SMC valves, air lines, and tanks. All I need is one more compressor, and 2 bags. I even have a custom made chrome triangle 4 link, and all the front bag brackets, and gauges. Damn, I need to get that truck put together.

[daverod]

It is friday. Your working on it right.

[Strodder]

Originally Posted by daverod

3/8" I've had it hooked up to my air compressor in my garage. It goes up pretty fast. I heard 1/2 was to much. You can adjust how fast or slow on the accair switch control. I think I'll switch my tank around so all the holes/plugs are in front. Might look better. Tried to hide all the parts, so thet don't walk off. I think I'll build a old looking box to cover it all.

With 1/2" I also have a adjustable muffler to slow it down. I'm going "old school".

[Strodder]

That's the plan. Thanks for keeping me on track.

[Strodder]

Hey Dave are you on Face Book?

[daverod]

I thought this was face book. No, My wife is maybe I'll start a page. Are u I was thinking I might get some jobs if I was on it.

[Strodder]

Yup. We could talk live if you opened up an account.
http://www.facebook.com/profile.php?id=1104129127