1968

[gdavis]

Happy Bird day guys. I hope you all have a great turkey day. Be thankful for what you have. There are a lot of people that has nothing. So when you set at the table give thanks. George

[swamp rat]

Originally Posted by gdavis

Happy Bird day guys. I hope you all have a great turkey day. Be thankful for what you have. There are a lot of people that has nothing. So when you set at the table give thanks. George

Absolutely! Happy Thanksgiving back to you too!

[silverbear]

Wow, Patches is coming along very nice. So sorry the used wiring harness did not work out for you. Don't let the amount of time it takes finish her up get you down. You have put way more attention to details than GM even thought about. She will be great one day soon and you will find the experience rewarding.

[gdavis]

Originally Posted by silverbear

Wow, Patches is coming along very nice. So sorry the used wiring harness did not work out for you. Don't let the amount of time it takes finish her up get you down. You have put way more attention to details than GM even thought about. She will be great one day soon and you will find the experience rewarding.

I used a lot of the spare parts off the harness that I got from you. But in the end it all will work out. Thanks for stopping by. George

[gdavis]

Today I finished wiring the fuseable red wire from the alt to the battery. I didn't like the way it looked. also put the wire in a wire looms and now they are nice and tidy. Tomorrow I will tackle the started and other items for the engine.
oil pressure switch
temp switch
distributor

[gdavis]

Today I finished wiring the starter and a little clean up on the wire looms. I will post pictures Monday on the progress. Thursday night the temp. was 34 and Friday the temp was 31 so it was a little cold for us in florida

[gdavis]

Today I started testing out the wiring. Got as far as the head lights and they work great. Tomorrow I will have to pull the wiper motor, something is wrong with it. It just makes a funny noise. I had it rebuilt a few months back, so I guess they did not do a good job. I should have checked it out sooner.

[gdavis]

got some more wiring done on the old girl.
front and rear clearance lights done
back up lights done
dome lights done
glove box light done
cig. lighter done
key switch done
head light switch done
wiper motor/washer switch done
alt wiring done
starter wiring done
fuse link from alt. done
head lights front and rear. done
front turn signals done
rear turn signals done
hazards front and rear done
no brake lights
I am having a time getting the Ts switch to work. I know it is the wiring somewhere.

[gdavis]

Originally Posted by gdavis

got some more wiring done on the old girl.
front and rear clearance lights done
back up lights done
dome lights done
glove box light done
cig. lighter done
key switch done
head light switch done
wiper motor/washer switch done
alt wiring done
starter wiring done
fuse link from alt. done
head lights front and rear. done
But no turn R or L front or rear
no hazard at all
no brake lights
I am having a time getting the Ts switch to work. I know it is the wiring somewhere.

I think my problem with the wiper motor is low amp. I am testing it with 2 amp battery charger. I am going to wait until I have finished the testing before I re-test with a fully charged battery.

[gdavis]

does anyone know how to get brake lights? all grounds are good.
all lights are new and have been tested.
Power to the brake switch
power out of the brake switch
power to the column connector
power out of the column connector. but no brakes lights.

[colgad]

Originally Posted by gdavis

does anyone know how to get brake lights? all grounds are good.
all lights are new and have been tested.
Power to the brake switch
power out of the brake switch
power to the column connector
power out of the column connector. but no brakes lights.

George, sorry I missed your call yesterday. If you have 12v when you step on the brakes out of the switch and thru the column then I would either pull the wire back from the rear of the truck and see if there is a break in the wire or maybe if it is spliced the splice came loose some how. If you are using the factory connector that joins the cab wiring at the plug in the frame I would question the rear harness. Or maybe that plug is loose. Did you use new pig tails from the rear lights? Could be that splice there too. If you don't get it fixed I may be able to come up next week.

[gdavis]

Originally Posted by colgad

George, sorry I missed your call yesterday. If you have 12v when you step on the brakes out of the switch and thru the column then I would either pull the wire back from the rear of the truck and see if there is a break in the wire or maybe if it is spliced the splice came loose some how. If you are using the factory connector that joins the cab wiring at the plug in the frame I would question the rear harness. Or maybe that plug is loose. Did you use new pig tails from the rear lights? Could be that splice there too. If you don't get it fixed I may be able to come up next week.

I hooked a hot lead to the turn signals and they work so it can't be the harness on the rear. That all is new and the lights are new. I can't get power coming out of the column to the rear. I check the power going in and there is no power coming out of the column, I want to say maybe the turn signal switch is bad. But I don't want to comment to that just yet. If I can't figure it out maybe a trip might not be a bad idea. I have asked of you before and you came up without question. Let me keep trying and see if I can do it and if not I thank you ahead. can you answer me this how many hot wires are there going to the column connector and color. Maybe you know without looking at your truck. Maybe that will at least be a help.

[colgad]

Originally Posted by gdavis

I hooked a hot lead to the turn signals and they work so it can't be the harness on the rear. That all is new and the lights are new. I can't get power coming out of the column to the rear. I check the power going in and there is no power coming out of the column, I want to say maybe the turn signal switch is bad. But I don't want to comment to that just yet. If I can't figure it out maybe a trip might not be a bad idea. I have asked of you before and you came up without question. Let me keep trying and see if I can do it and if not I thank you ahead. can you answer me this how many hot wires are there going to the column connector and color. Maybe you know without looking at your truck. Maybe that will at least be a help.

The turn signal and the brake lights are the same filament. So the turn signal wire Left is the Left brake light wire also. The Right turn signal is the Right brake light also.
----
ON MINE:
From the brake switch TO the P terminal on the column connector.
From the N terminal on the column connector goes to the Left turn signal bulb.
From the M terminal on the column connector goes to the Right turn signal bulb.
----
I believe this is the way it works:

So Normally the turn signal filaments are connected via the turn signal switch to the brake switch with the turn lever in the middle position. So if you pressed on the brake the Brake Light/Turn Filament would light for both left and right.

Power to the Turn signal comes from the Flasher if the turn signal lever is moved up or down (R/L). Same filament as brake light. So say if the lever in the Right turn position the Right turn signal is getting Blinking power from the Blinker relay, if you step on the brake the Left filament gets power from the brake switch and it goes solid ON.

I hope this is clearer than mud.
Dave

[Possmguts]

Man, I dont feel so bad about my small garage now... I guess one can do great things with what they have right? But at least you have Florida weather on your side... Freezing my ass off in Ohio!
Nice low budget build, coming along real nice.. thumbs up! Love the bench seat... sorta makes me wanna keep mine....

[gdavis]

Well. Today I found out why I have no brakes lights. There was a wire in the turn signal switch that came loose, poor soldering from the factory. I tried to re solder it but it did not work. So I ordered another switch today. It will be here in a few days. So tomorrow I will button everything up again and be ready when it comes. At least I know now that the wiring was right.

[swamp rat]

Glad ya figured it out!

[gdavis]

Originally Posted by swamp rat

Glad ya figured it out!

I was almost ready to call for help.

[gdavis]

Got the new switch in from fedex today. I hope to install it soon. Christmas is coming so may not have time for a while. Here is the mess I got with the wiring as we speak.

[Mustard72]

Wiring (and everything else since I last checked in) is coming along really nicely, George. I might have to steal your additional terminal idea in 15 years when I get to that part of the rebuild with Mustard.

[gdavis]

Originally Posted by Mustard72

Wiring (and everything else since I last checked in) is coming along really nicely, George. I might have to steal your additional terminal idea in 15 years when I get to that part of the rebuild with Mustard.

Go ahead and steal it, I stool it myself. I am glad to see you still around. Be good my friend.

[gdavis]

Any suggestions mates: I installed the turn signal switch and everything looks sweet. I only have one problem. The hazard button will go in and work but it want come back out to shut them off. It is easy to push in, so what is the problem.

[Possmguts]

Originally Posted by gdavis

Any suggestions mates: I installed the turn signal switch and everything looks sweet. I only have one problem. The hazard button will go in and work but it want come back out to shut them off. It is easy to push in, so what is the problem.

My new switch is stiff like that too.. You saying you cant get it back out or its just hard?

[gdavis]

Originally Posted by Possmguts

My new switch is stiff like that too.. You saying you cant get it back out or its just hard?

I can take my little finger and push on the inside of the switch and it trips it off. But I can't pull the switch back out. But that is the least of my problems. I installed a 73 to 87 switch, that has a screw in type hazard push pull. When I screw the button in the switch goes crazy. Like I put my left or right turn signal on and all the lights turn into 4 ways. and the minute I take the hazard screw out everything works great. So I am going to mount a push in type button on the dash for the hazards. Case solved. I am tired of replacing the turn signal switch. This id the third switch for this column.

[gdavis]

Got all the wiring done. installed the glove box, carpet, steering wheel today. I hope to put the seat back in tomorrow.

[swamp rat]

Awesome!