GM Semis - Page 87 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Bob B.** · 11-21-2020, 10:06 PM

Quote:

Originally Posted by factorystock

I'm drooling over that one. Thanks for posting special-K. A '64 or '66, appears to have a Hendrickson rear suspension, so it must be a dual drive and not a tag?

Funny thing a lot of the Chevy 6X2 trailing axle tandems did use Hendrickson rear suspension. They used the Chevy or Eaton built 14,000# drive axle in front with a dead axle in the rear position. The Hendrickson beam suspension worked well in those applications, it was less likely to 'hang' the drive axle on uneven terrain than a 4 leaf tandem suspension. That having been said, I think the truck in the picture is 'twin screw' judging by the lug tires on both rear axles.

**special-K** · 11-15-2020, 07:15 AM

It looks that way by the rubber on it, too. Wouldn't you love to have that one? I don't know anything about it. Just found the picture looking for Chevy fire trucks

I'm not sure if this has been shown. I just saved it, too

**davischevy** · 11-15-2020, 12:44 PM

Those last two are just plain cool.

C10 - C90 Bill · 11-15-2020, 01:18 PM

Two real nice trucks.

KQQL IT · 11-20-2020, 10:55 AM

Neat little truck

factorystock · 11-20-2020, 08:59 PM

Quote:

Originally Posted by KQQL IT

Neat little truck

A lot of chrome on that one! Note the highly sought after 22.5" solid rims!

**special-K** · 11-20-2020, 07:59 PM

Love it. A V8 emblem would really set it off. Not that GMC 6s aren't cool.

**special-K** · 11-21-2020, 11:44 AM

Yep! That thing is well equipped. Has the factory stake body, too. It could still have had the panoramic window added, but that is a very deluxe truck

I may have shown this truck earlier in this thread. I lost the picture when another laptop died and recently came across it again online. I absolutely love this truck. It was for sale in Wheels Of Time mag (ATHS) quite a few years ago and I was sad to not be able to consider buying. Even back then I felt it was very cheap for as nice as it is. The owner was asking $7,500 ten or more years ago. I'd put this thing up against all the li'l shortbeds at a show. I wonder where it is now

C10 - C90 Bill · 11-22-2020, 12:06 AM

I agree Tim, that Green Dump is one of the nicest examples of a 9500 anywhere.

If I had it I would even put it to work, lol.

Just selected loads though in nice weather only.

**special-K** · 11-22-2020, 09:11 AM

Me too. Just a handy chore truck. A load of driveway stone would just set it off, make the motor sound better

**special-K** · 11-27-2020, 01:45 PM

Not sure I didn't show this grain body yet

KQQL IT · 11-29-2020, 04:40 AM

FB grab

**special-K** · 11-29-2020, 11:55 AM

How about that. Looks like it got a special paint job

**special-K** · 12-13-2020, 01:20 PM

I'd like a single 5th wheel like this one. Second one is a pure dream load. I'll take them all!

**NewBayColony** · 12-13-2020, 05:56 PM

Love the car carrier. I drove one for 30 years. Fleet Carriers was bought by Ryder and I worked for them. That would have been tough to load and unload especially in the rain or snow. Not much clearance on the sides. I had a chance to buy a Chevy tractor from Anchor Motor Freight, another car carrier company, but I had no place to store it. Big mistake. It had the vacuum 2 speed rear end and air brakes.

KQQL IT · 12-16-2020, 03:13 PM

Fb grabs

sweetk30 · 12-18-2020, 10:16 PM

Quote:

Originally Posted by KQQL IT

Fb grabs

last pic of the 9500 truck and the addon 5 hole lower bumper section : so friend of mine was over tonight i was showing these pics and videos to . he was in love with all your guys old pics and videos .

this pic he said he sold a few of these bumpers back in his sale days .

that bumper back in the day was over $800.00 only and the EXTRA lower section was extra and it was NOT available as a replacement option or even a part # to order it back in the day .

he said lots of guys wanted these back in the day and there was more often a no go as the factory was the only ones to put them on . he did gm med / heavy duty sales parts for over 35+ years at a gm med / heavy duty dealer .

**Bob B.** · 12-19-2020, 02:14 AM

I believe it was stone guard for an extra deep radiator. Saw those guards on Astro 95's as well, sometimes chromed too!

factorystock · 12-20-2020, 11:20 AM

Looks like a 5000 series, probably near Pontiac Michigan.

KQQL IT · 12-16-2020, 03:16 PM

5 more

C10 - C90 Bill · 12-16-2020, 04:23 PM

Second picture down in post #2204, factory photo of nice brand new '66 or '67 7500's with either V-6 Gas or Toro-Flow engines. If the truck behind the Red one is Forest Green and has a Toro-Flow, it could be my old truck, lol.

My '67 7500 was a Toro-Flow before it got converted to a 6V-53.

**special-K** · 12-18-2020, 06:40 AM

Another handful

**special-K** · 12-22-2020, 07:24 AM

^^^ What a great picture!

C10 - C90 Bill · 12-22-2020, 10:00 AM

Quote:

Originally Posted by special-K

^^^ What a great picture!

Agree. One nice example of a '64/'65 5000.

But there is something missing.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
A '60's Road Tractor with no Air Horn !!

**special-K** · 12-26-2020, 12:59 PM

Unusual set-up. I like it

11-15-2020, 12:44 PM	#3
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,836	Re: GM Semis Those last two are just plain cool. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-15-2020, 01:18 PM	#4
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: GM Semis Two real nice trucks. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

11-20-2020, 10:55 AM	#5
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,237	Re: GM Semis Neat little truck Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

11-20-2020, 07:59 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis Love it. A V8 emblem would really set it off. Not that GMC 6s aren't cool. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-21-2020, 11:44 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis Yep! That thing is well equipped. Has the factory stake body, too. It could still have had the panoramic window added, but that is a very deluxe truck I may have shown this truck earlier in this thread. I lost the picture when another laptop died and recently came across it again online. I absolutely love this truck. It was for sale in Wheels Of Time mag (ATHS) quite a few years ago and I was sad to not be able to consider buying. Even back then I felt it was very cheap for as nice as it is. The owner was asking $7,500 ten or more years ago. I'd put this thing up against all the li'l shortbeds at a show. I wonder where it is now Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-21-2020 at 11:52 AM.

11-15-2020, 07:15 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis It looks that way by the rubber on it, too. Wouldn't you love to have that one? I don't know anything about it. Just found the picture looking for Chevy fire trucks I'm not sure if this has been shown. I just saved it, too Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-22-2020, 12:06 AM	#9
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: GM Semis I agree Tim, that Green Dump is one of the nicest examples of a 9500 anywhere. If I had it I would even put it to work, lol. Just selected loads though in nice weather only. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

11-22-2020, 09:11 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis Me too. Just a handy chore truck. A load of driveway stone would just set it off, make the motor sound better __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-27-2020, 01:45 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis Not sure I didn't show this grain body yet Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-29-2020, 04:40 AM	#12
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,237	Re: GM Semis FB grab Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

11-29-2020, 11:55 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis How about that. Looks like it got a special paint job __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-13-2020, 01:20 PM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis I'd like a single 5th wheel like this one. Second one is a pure dream load. I'll take them all! Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-13-2020, 05:56 PM	#15
NewBayColony Senior Member Join Date: Mar 2017 Location: Northbridge,MA Posts: 494	Re: GM Semis Love the car carrier. I drove one for 30 years. Fleet Carriers was bought by Ryder and I worked for them. That would have been tough to load and unload especially in the rain or snow. Not much clearance on the sides. I had a chance to buy a Chevy tractor from Anchor Motor Freight, another car carrier company, but I had no place to store it. Big mistake. It had the vacuum 2 speed rear end and air brakes. __________________ 72 C20 292 3OTT 77 GMC 2500 4x4 Longstepper 350 4sp 50 3100 ex Airforce/Town of Mendon fire truck 72 GMC 1500 2wd short stepside 250 4sp 78 GMC 2500 4x Longstepper 292 4sp 54 6400 Chevy 5 window 4 sp 2sp vac rear end Shell oil truck/dump truck (Norman)

12-16-2020, 03:13 PM	#16
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,237	Re: GM Semis Fb grabs Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

12-19-2020, 02:14 AM	#18
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,349	Re: GM Semis I believe it was stone guard for an extra deep radiator. Saw those guards on Astro 95's as well, sometimes chromed too! __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.



Register or Log In To remove these advertisements.

12-20-2020, 11:20 AM	#19
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,381	Re: GM Semis Looks like a 5000 series, probably near Pontiac Michigan. Attached Images

12-16-2020, 03:16 PM	#20
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,237	Re: GM Semis 5 more Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

12-16-2020, 04:23 PM	#21
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: GM Semis Second picture down in post #2204, factory photo of nice brand new '66 or '67 7500's with either V-6 Gas or Toro-Flow engines. If the truck behind the Red one is Forest Green and has a Toro-Flow, it could be my old truck, lol. My '67 7500 was a Toro-Flow before it got converted to a 6V-53. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

12-18-2020, 06:40 AM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis Another handful Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-22-2020, 07:24 AM	#23
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis ^^^ What a great picture! Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-26-2020, 12:59 PM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: GM Semis Unusual set-up. I like it Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.