![]() |
![]() |
#2151 | |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Quote:
Just the volume from everything I read when doing mine back when I could hear better! LOL!
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
|
![]() |
![]() |
![]() |
#2152 | |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Quote:
![]() The sub enclosure is coming along. I borrowed my neighbor's table saw for a bevel cut I needed on one of the panels, but was able to use my Smart Guide tool for the rest of the straight cuts. After roughing in the speaker hole, I put the panel up on the mill and used a boring tool to finish out the opening. Man, does that MDF ever make a mess. After reading up on how best to assemble the panels, I elected to go with wood dowels and Elmer's glue. I'm saving that for tomorrow.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
|
![]() |
![]() |
![]() |
#2153 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Looks very nice!
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#2154 |
Registered User
![]() Join Date: Mar 2010
Location: Piper, KS
Posts: 683
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Nice work as always....Keep up the good work.
|
![]() |
![]() |
![]() |
#2155 |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Thought I'd take a short break before starting work on the console. The sub box turned out better than it should have given my lack of woodworking skills. I had to remove the center gas tank mounting tab so the box would sit all the way back to the rear cab wall. I went ahead and rounded the corners on the front edges of the box, but I'm not sure if that will help or hinder the upholstery guys. I figure they've seen it all and the good ones can make a silk purse out of a sow's ear.
I plan to tie into the sub box with sheet metal for the console going forward. It's a lot less bulky and a few of the shapes I have in mind would be difficult with MDF.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
![]() |
![]() |
![]() |
#2156 |
Registered User
Join Date: Mar 2011
Location: Kansas City, Missouri
Posts: 3,541
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Nice carpentry work Vic!
__________________
Scott |
![]() |
![]() |
![]() |
#2157 |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Lest you think I've been slacking, here are some shots of the console in progress. The pattern I laid out in my CAD program underwent numerous revisions and an intermediate transfer to a 1/4" plywood panel to iron out all the fitment issues. I then traced it onto the sheet metal and cut it out. I spot welded angle pieces in those places where it wasn't possible to use the finger brake. Still a ways to go, but it's starting to take shape.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
![]() |
![]() |
![]() |
#2158 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: Crusty Rusty Leaky Squeaky 67 Step
This all looks super nice Vic! Wish I could keep a closer eye but life has me away from the scene. Only for a while though!
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#2159 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Saaaaayy.... that's nice!
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#2160 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Crusty Rusty Leaky Squeaky 67 Step
![]()
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#2161 |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Thanks, guys! Here's a progress shot of the console. I still need to figure out the best way to mount it and the sub box to the floor, but at least the basic shape is set.
Took a day off today and drove 2.5 hours south of here with Kathy to MoKan Dragway for some baseline runs on our 392 Charger. It was mostly disappointing. First two runs were time trials. Massive wheel hop with the street tires in sport mode and traction control off. Ran back to back 14 flat @ 107. MPH indicates a lot of room for improvement. Figured I'd only get one more run in eliminations, so I left the TC on this time. Left better but still had a lot of hop. Ran a 13.49 on a 13.95 dial so we loaded up and came home to do some research on the traction issues. These cars typically run mid 12's so I need to sort out the problems before we go again. Probably won't be until next spring anyway. Gotta lotta truck left to build. ![]()
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
![]() |
![]() |
![]() |
#2162 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Crusty Rusty Leaky Squeaky 67 Step
I always enjoy the "Old School" feel at MoKan. Jet cars there were Awesome!
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#2163 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Looks like winter is shaping up to be good on this thread! We need to get Vic GoPro! Sounds like a fun weekend to me. 12's would be cool, way cool!
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#2164 | ||
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Quote:
![]() Quote:
I'm still deep in the console project, although I'm just about out of stuff to do on it. I did a CAD drawing of the top plate that goes around the shifter and e-level control. Emailed the .dxf to a local shop in Independence for a RFQ but haven't heard back as yet. The part is tapered, has rounded corners and a 1/8" radius around all the top edges. Needs to be done on a CNC and my guys in Houston have been busy lately. So hopefully this will work out.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
||
![]() |
![]() |
![]() |
#2165 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Crusty Rusty Leaky Squeaky 67 Step
If they don't work out, let me know. I work with a machine shop infested with hot rodders and drag racers. Progress looks good!
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#2166 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Love the counsel Vic!
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#2167 |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: Crusty Rusty Leaky Squeaky 67 Step
This probably doesn't look much like progress, but trust me, it's a big step forward. The underside of the cab is officially finished. Taped everything off and shot the 3M Body Schutz into all the cracks and crevices. Before doing that, I filled any potentially leaky seams with 3M Strip Caulk. Hopefully, that will ward off any rust well into the future. The cab is now ready to go back on the chassis for the last time.
I also continued with the Rattle Trap on the topside of the floor but had to stop and order some more off eBay. Still have a long way to go to get the firewall covered as well as the panels I built for mounting stuff. The only noise I want inside the cab is the stereo... and open exhaust when I flip the switch. ![]()
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
![]() |
![]() |
![]() |
#2168 |
Registered User
Join Date: Oct 2007
Location: Spanaway
Posts: 8,451
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Lotta work, looks great!
__________________
Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's |
![]() |
![]() |
![]() |
#2169 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,106
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Looks fantastic.
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#2170 |
Registered User
![]() Join Date: Mar 2010
Location: Piper, KS
Posts: 683
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Last time for the cab to come off. Man that's got to feel good.
|
![]() |
![]() |
![]() |
#2171 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: Crusty Rusty Leaky Squeaky 67 Step
It looks great Vic, this is exciting, I hope I get a chance to ride in this beast some day.
|
![]() |
![]() |
![]() |
#2172 |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Thanks, guys.
After much hand wringing, I came to the conclusion that the Mango Tango color wasn't working with the silver/pale green on the rest of the truck. So I prepped all the components and squirted them with House of Kolor Platinum Pearl. I think they'll look better under the hood now. More conservative, I know, but not so much out of place either. I also shot the tubing for the air intake to match. I still need to fabricate a support bracket for the tube that attaches to the fan shroud. Also need to redo the bumpers and inner fenders in the same platinum color. I feel the matte clear on the silver makes them look like they were painted with a rattle can. My main concern is the gloss clear over all that filler. I ain't what I used to be when it comes to bodywork. Fingers crossed!
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
![]() |
![]() |
![]() |
#2173 |
Registered User
Join Date: Jun 2011
Location: Spokane, WA
Posts: 2,367
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Oh, I think you've still got the touch man. Looks outstanding!! I like it way better. CLEAN like your Shop! Nice work there.
__________________
'77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776 ![]() |
![]() |
![]() |
![]() |
#2174 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Oh, I bet a Kandy would look good over that Platinum. "specially if you threw some chunky stuff in it.
Much better look.
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#2175 | ||
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: Crusty Rusty Leaky Squeaky 67 Step
Quote:
Quote:
![]() I got the stainless trim around the drip rails, but not without a fight. The bottom on both sides wouldn't stay snapped in place, so I used some tiny watch screws to hold it and then ground the heads down and polished them. Barely can tell they're in there. Also finished installing the AC evaporator. Once I had the upper two hard lines more or less in place, I removed the unit and worked the heater lines until they exited the holes dead center. Scott dropped by this afternoon just in time to help me with an extra pair of hands for the final installation. Thanks, Scott! Now for the wiring. The cruise control system arrived this week, so I have to figure out how to loom all of the wires under the dash along with the stereo, AC, dash cam and etc. Should be treat.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
||
![]() |
![]() |
![]() |
Bookmarks |
|
|