** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 87 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffg1010 · 11-07-2011, 10:55 AM

Hey Drew, are you using the newer trucks heater/ac dash controls? If so, I'll be anxious to see that once you install it.

drewskiren · 11-07-2011, 11:27 AM

Quote:

Originally Posted by jeffg1010

Hey Drew, are you using the newer trucks heater/ac dash controls? If so, I'll be anxious to see that once you install it.

Yes I will, but of course I can't make it simple. I don't want to see that controller and it's 90's/00's look. I am going to extend the wires up the A pillar and make a custom mini overhead console mount. Trying to get it out of sight as best as possible.

jeffg1010 · 11-07-2011, 12:18 PM

haha, you sound like me. But, it'll look great.

I got so used to my factory radio delete dash, that when I finally got around to installing a stereo, I didn't want to mess with that beautiful blank white canvas of a dash. So... where did the radio go? Overhead.

Quote:

Originally Posted by drewskiren

Yes I will, but of course I can't make it simple. I don't want to see that controller and it's 90's/00's look. I am going to extend the wires up the A pillar and make a custom mini overhead console mount. Trying to get it out of sight as best as possible.

7dee2 · 11-07-2011, 01:10 PM

Can I get U some sauce with that Spaghetti!!

drewskiren · 11-08-2011, 01:34 AM

Tonight I actually ate spaghetti, inside the house of course.

After that I cut apart my battery tray and remade it to fit on the drivers side where the new truck setup is.

I also made this funny little bracket to mount the engine computer to. I found a perfect little spot tucked up in the fender that the wires were just long enough to reach. I'll have to paint them black, but first I'll have to replace my welder that died before I finished my computer bracket.

drewskiren · 11-08-2011, 01:37 AM

more

67chevy1series · 11-08-2011, 01:38 AM

getting close

JDeere550 · 11-08-2011, 02:02 AM

is that fuse block going to fit under the hood there? lol

VA72C10 · 11-08-2011, 02:12 AM

sorry about the welder...

71Sleeper · 11-08-2011, 06:39 AM

You have worked that welder to death.

**oldman3** · 11-08-2011, 09:28 AM

Looks better each time....Jim

mcbassin · 11-08-2011, 09:32 AM

Nice work on the battery tray and pcm bracket. One step closer one step back with the welder. No chance you can fix it? Is it a through away model?

**67cheby** · 11-08-2011, 10:19 AM

looking like it was meant to be stuffed in there !!

drewskiren · 11-08-2011, 10:35 AM

Quote:

Originally Posted by mcbassin

Nice work on the battery tray and pcm bracket. One step closer one step back with the welder. No chance you can fix it? Is it a through away model?

Judging from the noise it made, I'm calling it done and getting a Miller.

7dee2 · 11-08-2011, 01:18 PM

All the spagetti talk makes me want Italian for dinner!

Bummer about the welder..

I agree your PCM does look right at home. What are you going to do about the fuse box?

drewskiren · 11-08-2011, 06:58 PM

Quote:

Originally Posted by 7dee2

All the spagetti talk makes me want Italian for dinner!

Bummer about the welder..

I agree your PCM does look right at home. What are you going to do about the fuse box?

Whats wrong with the fuse box? The hood is a lot taller than the fender.

7dee2 · 11-08-2011, 08:23 PM

True!

I guess it just looks like it might be to high and would hit the hood. But if you say it clears, I believe!

Your fab skills are beyond me, really I am not worthy!!

drewskiren · 11-08-2011, 08:40 PM

Quote:

Originally Posted by 7dee2

True!

I guess it just looks like it might be to high and would hit the hood. But if you say it clears, I believe!

Your fab skills are beyond me, really I am not worthy!!

It will be close, if it doesn't quite fit I can just pull all of the colored thingies out of the top to get more clearance.

**67cheby** · 11-08-2011, 11:41 PM

LOL....ya colored thingees are so OVERRATED

VA72C10 · 11-08-2011, 11:52 PM

colored thingies

CowboyProtectionUnit · 11-08-2011, 11:56 PM

Hmmmmmmmmmmmmmm I don't think ya need'm......Should be Fine With out'm LOL

drewskiren · 11-09-2011, 01:11 AM

Looks like the colored thingies get to stay.

Working on mounting the A/C condenser and running the aluminum lines. I had to clearance the fender liner and drill a hole through the radiator support.

I also mounted the power steering cooler.

VA72C10 · 11-09-2011, 01:24 AM

Yay colored thingies

Moving right along...

CowboyProtectionUnit · 11-09-2011, 01:34 AM

ehhhhhhhh I knew they'd fit

JDeere550 · 11-09-2011, 02:36 AM

ahh that picture showed the clearance alot better for the colored thingiees lol

11-07-2011, 10:55 AM	#2151
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Hey Drew, are you using the newer trucks heater/ac dash controls? If so, I'll be anxious to see that once you install it. __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

11-07-2011, 01:10 PM	#2154
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,956	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Can I get U some sauce with that Spaghetti!! __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

11-08-2011, 01:34 AM	#2155
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Tonight I actually ate spaghetti, inside the house of course. After that I cut apart my battery tray and remade it to fit on the drivers side where the new truck setup is. I also made this funny little bracket to mount the engine computer to. I found a perfect little spot tucked up in the fender that the wires were just long enough to reach. I'll have to paint them black, but first I'll have to replace my welder that died before I finished my computer bracket. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-08-2011, 01:37 AM	#2156
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. more Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-08-2011, 01:38 AM	#2157
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. getting close

11-08-2011, 02:02 AM	#2158
JDeere550 Registered User Join Date: Aug 2011 Location: Sacramento, California Posts: 79	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. is that fuse block going to fit under the hood there? lol __________________ 1970 C/20 4x4, 350, sm465, np205(She tipped over... total rebuild from the frame up!) ya gotta keep on keepin' on, Life's a garden, dig it!

11-08-2011, 02:12 AM	#2159
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. sorry about the welder... __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-08-2011, 06:39 AM	#2160
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. You have worked that welder to death. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

11-08-2011, 09:28 AM	#2161
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks better each time....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

11-08-2011, 09:32 AM	#2162
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Nice work on the battery tray and pcm bracket. One step closer one step back with the welder. No chance you can fix it? Is it a through away model? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-08-2011, 10:19 AM	#2163
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. looking like it was meant to be stuffed in there !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-08-2011, 01:18 PM	#2165
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,956	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. All the spagetti talk makes me want Italian for dinner! Bummer about the welder.. I agree your PCM does look right at home. What are you going to do about the fuse box? __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

11-08-2011, 08:23 PM	#2167
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,956	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. True! I guess it just looks like it might be to high and would hit the hood. But if you say it clears, I believe! Your fab skills are beyond me, really I am not worthy!! __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

11-08-2011, 11:41 PM	#2169
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. LOL....ya colored thingees are so OVERRATED __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-08-2011, 11:52 PM	#2170
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. colored thingies __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

11-08-2011, 11:56 PM	#2171
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Hmmmmmmmmmmmmmm I don't think ya need'm......Should be Fine With out'm LOL __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

11-09-2011, 01:11 AM	#2172
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks like the colored thingies get to stay. Working on mounting the A/C condenser and running the aluminum lines. I had to clearance the fender liner and drill a hole through the radiator support. I also mounted the power steering cooler. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-09-2011, 01:24 AM	#2173
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Yay colored thingies Moving right along... __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-09-2011, 01:34 AM	#2174
CowboyProtectionUnit Registered User Join Date: Mar 2011 Location: Beemer, NE Posts: 420	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. ehhhhhhhh I knew they'd fit __________________ Eric "Target" Sherwood Professional Bullfighter For Hire God Bless and Gods Speed! TheCowBoyProtectionUnit@yahoo.com http://www.facebook.com/pages/Eric-T...59496227444241

11-09-2011, 02:36 AM	#2175
JDeere550 Registered User Join Date: Aug 2011 Location: Sacramento, California Posts: 79	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. ahh that picture showed the clearance alot better for the colored thingiees lol __________________ 1970 C/20 4x4, 350, sm465, np205(She tipped over... total rebuild from the frame up!) ya gotta keep on keepin' on, Life's a garden, dig it!

Register or Log In To remove these advertisements.