My Dusty 71 GMCe Electruck - Page 88 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Gregski** · 11-01-2023, 08:36 PM

today I got to charge at the wife's work (2 miles from our house) at a system called JuiceBox, you can't make this stuff up folks

Am I the only one who thinks this looks a bit like a Mars Station?

short video: DIY Chevy C10 Truck EV Conversion getting a JuiceBox

_

**Dieselwrencher** · 11-02-2023, 06:52 AM

Very cool! I have not checked in for a while but it looks like you sure have made great progress on it! I'll have to go back and see where I left off. I'm interested to see how much range you have. We surely don't have the chargers as close as you do out there I'm sure. We have more and more being built in the big cities but none rural.

I'm very impressed with it. The difference from the quiet from your truck and the loudness of mine are huge.

If I am forced to have an EV, this would be the only choice for me. Something retro'd to a vintage ride. Do you plan to tow anything with it once you get your second battery installed?

**Gregski** · 11-03-2023, 11:33 AM

Quote:

Originally Posted by Dieselwrencher

Very cool! I have not checked in for a while but it looks like you sure have made great progress on it! I'll have to go back and see where I left off. I'm interested to see how much range you have. We surely don't have the chargers as close as you do out there I'm sure. We have more and more being built in the big cities but none rural...

glad you swung back around, great question about the range, I am using a battery pack from a hybrid donor vehicle and not a 100% electric car and those tend to be much smaller. it is a 9.1 killer watt battery pack and the golden rule is about 3.5 miles per kW so 9.1 times 3.5 puts me at a range of only 31.85 miles

Well that SUCKS you shout! well I did a number of road tests and got closer to 39.9 miles before completely running out of juice, but wait, there's more, I own two of these packs already and all I need to do is get off my butt and add the second one and we will essentially double our range to over 65 miles, not too bad

Fun Fact: Per insurance company stats, the average American drives less than 40 miles per day! please think about that for a minute

FYI, each pack weighs apprximately 180 pounds and cost me on average $1K each (paid $900 for the first one, and $1,100 for the second one)

here is a link to an absolutely fascinating video of me manhandling one of these beauties: BMW 530e Plug In Hybrid HV Battery Pack

Bonus Points: if you can identify the name of the song?

**Gregski** · 11-03-2023, 11:44 AM

Quote:

Originally Posted by Dieselwrencher

I'm very impressed with it. The difference from the quiet from your truck and the loudness of mine are huge.

If I am forced to have an EV, this would be the only choice for me. Something retro'd to a vintage ride. Do you plan to tow anything with it once you get your second battery installed?

Appreciate the questions. All my trucks become sissy Hot Rods and don't do much manual labor. This one doesn't even have a trailer hitch and sports a sexy roll pan instead. Don't get me wrong the electruck will still do truck things but I don't recon towing will be one of them. I look forward to fetching a Christmas tree in it this year!

light duty etruck

**loudchevy** · 11-03-2023, 01:41 PM

Quote:

Originally Posted by Gregski

Bonus Points: if you can identify the name of the song?

awesome selection for the song

**Gregski** · 11-03-2023, 01:46 PM

Quote:

Originally Posted by loudchevy

awesome selection for the song

Yup, luv Bon Jovi

**Gregski** · 11-04-2023, 11:54 AM

yup, yes this was totally easier to paint on the truck than off of it completely free of any obstructions without any need for tape or masking, aha

**Gregski** · 11-04-2023, 11:58 AM

well I don't know about you fellers and fellecitas but I can't store already used can of spray paint worth beans and I've tried all them tricks, flip it upside down and spray till it comes out clear, blah blah blah, well they aint made to last to be stored, so after painting that little strip with a new can of blackness it was time to use up the rest, and what better place to do it than that fugly bed

**Gregski** · 11-04-2023, 12:08 PM

so since we is getting a brand new bed sides next year, [note to self: rob a bank] we called up the boys from ZeroPrep Auto Body to help us shoot the inner bed sides

and I think if you don't look at it, it turned out great! $6.99 well spent

FRENCHBLUE72 · 11-04-2023, 12:56 PM

Looks like zero prep did a great job

**Gregski** · 11-04-2023, 01:28 PM

Quote:

Originally Posted by FRENCHBLUE72

Looks like zero prep did a great job

LoL do your ducks play our kids SJSU or SDSU in pig skin this year?

FRENCHBLUE72 · 11-04-2023, 04:04 PM

No clue honestly been trying to get busy on my truck instead of so much boob tube lol..

**Gregski** · 11-05-2023, 10:03 AM

just staying busy

**Gregski** · 11-05-2023, 10:24 AM

and then there was two

**Gregski** · 11-05-2023, 10:27 AM

one of many trial fits, the way I like to run 'em they were about 3" too long

yuccales · 11-05-2023, 11:34 AM

Quote:

Originally Posted by Gregski

I look forward to fetching a Christmas tree in it this year!

With all that stored power, you can haul that tree with it's lights on.

**Gregski** · 11-05-2023, 12:11 PM

Quote:

Originally Posted by yuccales

With all that stored power, you can haul that tree with it's lights on.

no doubt

**Gregski** · 11-05-2023, 12:13 PM

and a couple nip and tucks later and we have an almost perfect fit, well sort of

**Dieselwrencher** · 11-07-2023, 09:32 AM

Quote:

Originally Posted by yuccales

With all that stored power, you can haul that tree with it's lights on.

That would be cool!

With an all LED one there wouldn't be much load.

The bed spray job will please the eye. Haha Nice work on the floor mats. If you want to add carpet later, I picked up a 3x4 piece of black carpet from walmart and used it to make the carpet for my 40 Ford. It might take some heat forming in the truck but definitely a cheaper alterative.

**Gregski** · 11-07-2023, 09:34 AM

Quote:

Originally Posted by Dieselwrencher

That would be cool!

With an all LED one there wouldn't be much load.

The bed spray job will please the eye. Haha Nice work on the floor mats. If you want to add carpet later, I picked up a 3x4 piece of black carpet from walmart and used it to make the carpet for my 40 Ford. It might take some heat forming in the truck but definitely a cheaper alterative.

thanks Ryan, are you telling us we don't need no specialized automotive grade carpet to shape it / heat mold it? I know nothing about carpets so I am not questioning you just asking

**Dieselwrencher** · 11-07-2023, 10:43 AM

Quote:

Originally Posted by Gregski

thanks Ryan, are you telling us we don't need no specialized automotive grade carpet to shape it / heat mold it? I know nothing about carpets so I am not questioning you just asking

As long as it has a backing then you should be able to heat it and mold it/form it. I usually use gloves and a 2x4 or an old large book. Heat up the back of the matting and then hold the carpet in place. Sometimes I'll set a block or something heavy in place to hold it in shape while it cools.

**Gregski** · 11-08-2023, 12:48 PM

so with the new Speedometer and Tachometer installed it was time to tuck away all the loose wiring

Fun Level: 2

a link to a short video: Wrapping Up Phase I - Electric Truck Conversion, 1971 Chevy C10 GMC

_

daveshilling · 11-08-2023, 08:54 PM

It's really coming along Gregski! Waiting for the Tesla Rear motor conversion once you get antsy...

**Gregski** · 11-09-2023, 10:30 AM

Quote:

Originally Posted by daveshilling

It's really coming along Gregski! Waiting for the Tesla Rear motor conversion once you get antsy...

Thank you, and ... Don't you dare plant that seed.

**Gregski** · 11-09-2023, 10:34 AM

link to a little peak inside after the wire mess clean up

Electric Truck Conversion Cab No More Wire Mess

_

11-01-2023, 08:36 PM	#2176
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck today I got to charge at the wife's work (2 miles from our house) at a system called JuiceBox, you can't make this stuff up folks Am I the only one who thinks this looks a bit like a Mars Station? short video: DIY Chevy C10 Truck EV Conversion getting a JuiceBox _ Attached Images

11-02-2023, 06:52 AM	#2177
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: My Dusty 71 GMCe Electruck Very cool! I have not checked in for a while but it looks like you sure have made great progress on it! I'll have to go back and see where I left off. I'm interested to see how much range you have. We surely don't have the chargers as close as you do out there I'm sure. We have more and more being built in the big cities but none rural. I'm very impressed with it. The difference from the quiet from your truck and the loudness of mine are huge. If I am forced to have an EV, this would be the only choice for me. Something retro'd to a vintage ride. Do you plan to tow anything with it once you get your second battery installed? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 11-02-2023 at 09:21 AM.

11-04-2023, 11:54 AM	#2182
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck yup, yes this was totally easier to paint on the truck than off of it completely free of any obstructions without any need for tape or masking, aha Attached Images

11-04-2023, 11:58 AM	#2183
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck well I don't know about you fellers and fellecitas but I can't store already used can of spray paint worth beans and I've tried all them tricks, flip it upside down and spray till it comes out clear, blah blah blah, well they aint made to last to be stored, so after painting that little strip with a new can of blackness it was time to use up the rest, and what better place to do it than that fugly bed Attached Images

11-04-2023, 12:08 PM	#2184
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck so since we is getting a brand new bed sides next year, [note to self: rob a bank] we called up the boys from ZeroPrep Auto Body to help us shoot the inner bed sides and I think if you don't look at it, it turned out great! $6.99 well spent Attached Images

11-04-2023, 12:56 PM	#2185
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: My Dusty 71 GMCe Electruck Looks like zero prep did a great job __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-04-2023, 04:04 PM	#2187
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: My Dusty 71 GMCe Electruck No clue honestly been trying to get busy on my truck instead of so much boob tube lol.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-05-2023, 10:03 AM	#2188
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck just staying busy Attached Images

11-05-2023, 10:24 AM	#2189
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck and then there was two Attached Images

11-05-2023, 10:27 AM	#2190
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck one of many trial fits, the way I like to run 'em they were about 3" too long Attached Images

11-05-2023, 12:13 PM	#2193
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck and a couple nip and tucks later and we have an almost perfect fit, well sort of Attached Images

11-08-2023, 12:48 PM	#2197
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck so with the new Speedometer and Tachometer installed it was time to tuck away all the loose wiring Fun Level: 2 a link to a short video: Wrapping Up Phase I - Electric Truck Conversion, 1971 Chevy C10 GMC _ Attached Images

11-08-2023, 08:54 PM	#2198
daveshilling Registered User Join Date: Jan 2013 Location: roseville Posts: 823	Re: My Dusty 71 GMCe Electruck It's really coming along Gregski! Waiting for the Tesla Rear motor conversion once you get antsy... __________________ My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo

11-09-2023, 10:34 AM	#2200
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,849	Re: My Dusty 71 GMCe Electruck link to a little peak inside after the wire mess clean up Electric Truck Conversion Cab No More Wire Mess _ Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.