Daverods project 66 - Page 88 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ruffrida2005 · 02-06-2011, 09:26 PM

Looking good Dave. Is that a blazer tank?

daverod · 02-06-2011, 09:56 PM

Quote:

Originally Posted by ruffrida2005

Looking good Dave. Is that a blazer tank?

It was so long ago I forget.

bubba327 · 02-07-2011, 12:03 AM

Quote:

Originally Posted by daverod

I'm going with spray foam and some clear caulk. I think it will hold it just fine.

hell they built the Teton dam out of it I'm sure it will hold.

But the Teton dam cracked, washed out and flooded the whole valley back in the old days ......you may need super glue also.

rattleon · 02-08-2011, 11:08 PM

Quote:

Originally Posted by daverod

I'm going with spray foam and some clear caulk. I think it will hold it just fine.

hell they built the Teton dam out of it I'm sure it will hold.

OK...now that's some funny sh#t

Greetings from another struggling contractor in Poky

66BowTieBoy · 02-08-2011, 11:55 PM

Quote:

Originally Posted by rattleon

OK...now that's some funny sh#t

Greetings from another struggling contractor in Poky

The way I hear it, Poky was a suburb of Idaho Falls before the Teton Flush...

daverod · 02-09-2011, 12:55 AM

Quote:

Originally Posted by rattleon

OK...now that's some funny sh#t

Greetings from another struggling contractor in Poky

Is that 31 pu red? Don't know what year this was buts it's the oldest I've seen in Poky. Thought maybe it was yours?

rattleon · 02-09-2011, 01:27 AM

Quote:

Originally Posted by daverod

Is that 31 pu red? Don't know what year this was buts it's the oldest I've seen in Poky. Thought maybe it was yours?

Nope, not mine, wish it was, but mine is in a pile of parts in the back of the shop third in line after I get the '70 done and some mods done on the coupe.

rattleon · 02-09-2011, 01:32 AM

Quote:

Originally Posted by 66BowTieBoy

The way I hear it, Poky was a suburb of Idaho Falls before the Teton Flush...

No...your thinkin' of Blackfoot and we use to be where Blackfoot is now.

daverod · 02-09-2011, 02:44 PM

Jeff the painter. Cracks me up.

Since your not doing much work u should start a bulid thread for that truck of yours.

rattleon · 02-09-2011, 08:54 PM

Quote:

Originally Posted by daverod

Jeff the painter. Cracks me up.

Since your not doing much work u should start a bulid thread for that truck of yours.

actually we've been pretty busy as of late, but who knows what lurks a couple months from now.....I did think about starting a build thread, just haven't got around to it. It would have probably been one of the longest going build threads ever as I started to put it together once before then changed directions and ripped it back apart to build as a drag truck that may see a little street time? I do have the roll cage done and almost done with rear suspension and other odds & ends then blow it apart for more paint.

daverod · 02-09-2011, 09:23 PM

It seems to help me work on my truck.

Even if I don't get much done I can still take some picutures and post them. Money seems to be my problem.

The lack of it. I think of all the stuff I still need to buy. I think I would be better off if I just building a couple houses and buying a nice truck. Nah

Just kiddin. I love working on my truck.

daverod · 02-09-2011, 11:21 PM

New tool for my garage.

Some people live like pigs.

Good deal just dirty.

Might have to pull out the sand blaster.

protrash64 · 02-09-2011, 11:27 PM

Gonna do some powdercoating, Dave???

daverod · 02-09-2011, 11:28 PM

Thats the plan.

Might be awhile but least I have the oven. A oven thats not the old ladies. Might be good for boiling out elk/bear heads.

scotts62 · 02-09-2011, 11:32 PM

What powder coating kit are you going to end up using?

daverod · 02-09-2011, 11:32 PM

? Any ideas.

I was thinking somthing from harbor freight? Don't really know.

Strodder · 02-09-2011, 11:38 PM

That stove would be a good shop heater.

scotts62 · 02-09-2011, 11:44 PM

Pm sent

daverod · 02-09-2011, 11:44 PM

It has many uses. I could make some brownies while I work on my truck.

scotts62 · 02-09-2011, 11:45 PM

Quote:

Originally Posted by daverod

It has many uses. I could make some brownies while I work on my truck.

Strodder · 02-09-2011, 11:49 PM

Quote:

Originally Posted by daverod

It has many uses. I could make some brownies while I work on my truck.

Or age some POT.

daverod · 02-09-2011, 11:53 PM

I don't think my PO would like that.

This is Utah not California. No, wait this is'nt Utah. Funny looks like Utah. Thinks like Utah. Smells like Utah

What do you use in your sand blaster?

Strodder · 02-10-2011, 12:38 AM

Quote:

Originally Posted by daverod

I don't think my PO would like that.

This is Utah not California. No, wait this is'nt Utah. Funny looks like Utah. Thinks like Utah. Smells like Utah

What do you use in your sand blaster?

Harbor Freight aluminum-oxide

http://www.harborfreight.com/garage-...rit-99945.html

daverod · 02-10-2011, 12:40 AM

Quote:

Originally Posted by Strodder

Harbor Freight aluminum-oxide

http://www.harborfreight.com/garage-...rit-99945.html

Why? I've just been using sand

Strodder · 02-10-2011, 10:52 AM

Where do you get the sand, and what kind is it. And how much?

02-06-2011, 09:26 PM	#2176
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Looking good Dave. Is that a blazer tank? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

02-09-2011, 02:44 PM	#2184
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Jeff the painter. Cracks me up. Since your not doing much work u should start a bulid thread for that truck of yours. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-09-2011 at 02:47 PM.

02-09-2011, 09:23 PM	#2186
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 It seems to help me work on my truck. Even if I don't get much done I can still take some picutures and post them. Money seems to be my problem. The lack of it. I think of all the stuff I still need to buy. I think I would be better off if I just building a couple houses and buying a nice truck. Nah Just kiddin. I love working on my truck. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-09-2011 at 09:24 PM.

02-09-2011, 11:21 PM	#2187
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 New tool for my garage. Some people live like pigs. Good deal just dirty.Might have to pull out the sand blaster. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-09-2011 at 11:22 PM.

02-09-2011, 11:27 PM	#2188
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Daverods project 66 Gonna do some powdercoating, Dave??? __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-09-2011, 11:28 PM	#2189
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Thats the plan. Might be awhile but least I have the oven. A oven thats not the old ladies. Might be good for boiling out elk/bear heads. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-09-2011 at 11:30 PM.

02-09-2011, 11:32 PM	#2190
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Daverods project 66 What powder coating kit are you going to end up using? __________________ Scott 93 crew cab build Project 62

02-09-2011, 11:32 PM	#2191
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 ? Any ideas. I was thinking somthing from harbor freight? Don't really know. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-09-2011 at 11:36 PM.

02-09-2011, 11:38 PM	#2192
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 That stove would be a good shop heater. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

02-09-2011, 11:44 PM	#2193
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: Daverods project 66 Pm sent __________________ Scott 93 crew cab build Project 62

02-09-2011, 11:44 PM	#2194
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 It has many uses. I could make some brownies while I work on my truck. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

02-09-2011, 11:53 PM	#2197
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I don't think my PO would like that.This is Utah not California. No, wait this is'nt Utah. Funny looks like Utah. Thinks like Utah. Smells like Utah What do you use in your sand blaster? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-09-2011 at 11:57 PM.

02-10-2011, 10:52 AM	#2200
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Where do you get the sand, and what kind is it. And how much? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.