![]() |
|
![]() |
#1 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks Mike!
Exhaust Wrap I'm gonna do this myself because frankly, I'm just tired of spending so much on labor! AND because I feel "left out" not having done much of the work other than full tear down on this iteration of the truck. Who's done it? I am wrapping my exhaust AFTER the exhaust manifolds - they will be Jet HOT coated - because the first foot of tubing is directly over my frame-mounted coils. I watched a few videos on it last night and it seems straight forward. Many of the videos suggested wrapping it wet. Apparently makes the wrap tighter(?) I know to: - Double the ends over to avoid raveling of the cloth. - Secure the wrap with tape til done in case you want to redo it. - Finalize it with stainless metal straps (or pipe clamps). - Run the engine (if wet) to dry it - Overlap 1/4 (some suggested 1/2) to maximize heat protection Any other suggestions? Tricks?
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
|
Re: Danny Boy is BAACK! w/ '55 Big Window
I did mine a few weeks ago, for a first timer I don't think it turned out too bad. One thing I do regret is starting at the front and working to the rear because it would probably look better with the overlap going the other way. The overlap is about 50%. Also, the thin metal ties are pretty puny, I've been thinking about switching to SS hose clamps on the end.
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks for the pic Black Sheep!
I think the ties look very minimal too. Hadn't thought about stainless hose clamps but that's a good idea. The package I have is 50 ft. It will be very tight to keep the roll intact while wrapping so I'm thinking I should roll it out in advance and just cut it into two 25 ft pieces. I don't need that much coverage but why NOT use it? It'll be cool (literally, ha ha) to wrap all the way to the front of the mufflers.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#4 | |
Registered User
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
^^^ Ok, you told me exactly what I need to know.^^^
I'll unroll it, cut to two 25ft pieces and see if it takes me from the exhaust manifolds to the mufflers. It'll be at least close. I'll use SS hose clamps so I can re-position if I need to. Did you do yours wet? I hear it stretches a little bit if you do.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Put it on dry, pulling and twisting as I went. it seems plenty tight, time will tell
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2014
Location: Kitchener, Ontario, Canada
Posts: 3,254
|
Re: Danny Boy is BAACK! w/ '55 Big Window
I did mine, I used the sst tie wraps, I did not wet. Just pull real tight and wear gloves the fiberglass will make your hands itch. It has held up great 8400mi and counting.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks you guys. I think dry would be SO much less mess. I'll try that first using hose clamps. If it doesn't come out good I can always re-wrap. Did you guys use a mask? I don't want to be breathing Fiberglas if it gives off loose fibers.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#9 | ||
Registered User
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
The info for the wrap I got from Summit says: Quote:
|
||
![]() |
![]() |
![]() |
#10 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks Black Sheep.
Mike had already bought Fiberglas wrap and SS ties for me so I'll use it. I'm not wrapping the exhaust manifolds themselves, just the start of the exhaust tubing after it because it goes directly over my coils. Hopefully it'll work fine.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: Danny Boy is BAACK! w/ '55 Big Window
So what's happening Dan ?
Are we in delay prison ?
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
![]() |
![]() |
![]() |
#12 |
Senior Member
![]() Join Date: Mar 2009
Location: Vancouver Island, Courtenay B.C. CANADA
Posts: 575
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Hey Dan any progress pictures of your seat?
__________________
1962 Chevy blue SBFS 1957 Chevy yellow SBSS 1956 GMC red SBSS Nov 2017 ToTM https://www.facebook.com/groups/Cana...geChevyTrucks/ |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Delay prison? Ha, yeah. Sentenced to 3 years so far.
Stopped by upholsterer yesterday to pick up the springs from my bench. They are perfect, freshly sandblasted & powder coated. I’ll put them up for sale here or elsewhere. I figure someone will want them eventually. Other than removing the springs, cutting/fitting the wood & foam no other work has been done because he’s doing work for clients going to the SEMA show next month. Real life has intruded on my progress on wrapping the exhaust and sanding/finishing the bed wood. And I plan to install my side windows myself...or at least try.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#14 |
Senior Member
![]() Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Dang I hate when that happens .
Be sure to put a couple of layers of blue tape on the doors to protect from scratches when you install the glass. I didn't and chipped the paint on my '57 with the vent window runner lower mount taking it out. ![]() Gee you blasted the seat springs and had them powder coated for a possible future sale . You think like I do , I have a set of wheels I just pulled of my Dart 14x5 4" bolt pattern that I'm going to blast and powder coat for the next guy . Now get back to the bed wood and Get'er done ![]()
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Glen,
When I had the seat frame blasted/coated I didn’t know I’d not be using the springs. But now they’re done so someone will get a very nice deal. Yup, gotta get back to the bed wood. That just takes time...time...time! PS: Yes on the tape. Been watching YouTube videos and that was suggested. It looks easy but also easy to scratch new paint! CANT. Let that happen.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#16 |
Senior Member
![]() Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: Danny Boy is BAACK! w/ '55 Big Window
If you are using the vent windows, as you slid the vent assembly into the door it will need to be rotated to get it in .
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
![]() |
![]() |
![]() |
#17 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Yup, I am and that was in the YouTube video.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#18 |
Senior Member
![]() Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Been a while , anything new happening ?
BTW do you have any close up pic's of your remote mounted coils ?
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
![]() |
![]() |
![]() |
#19 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Hi Glen, thnks for asking.
A whole lot of nothing is what’s new. List of Procrastination Excuses To Follow: I was out of town for a long weekend last week and I am cleaning out the main portion of my tiny 18x18 garage (bed wood spread & all sorts of tools spread out) to take a photo of the truck IN the garage for the insurance company. I’m dragging my feet on that. I need to get it in there and get it up as high as I can on jackstands to wrap the exhaust. It would be so much easier with a lift, but oh well. Then my amateurish attempts at installing the windows myself based on YouTube videos will begin.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! Last edited by Dan in Pasadena; 11-06-2017 at 11:26 PM. |
![]() |
![]() |
![]() |
#20 |
Senior Member
![]() Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,619
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Any Pic's of the remote coils ?
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
![]() |
![]() |
![]() |
#21 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Here you go. I had to use the flash so they’d show clearly but it makes the paint kinda look pink. But that was the point of putting them down on the frame- so they’d recede from view. I had to do this because I used the Delmo adapters to put Moon Equipment finned valve covers on my LS.
Also pics of her in the garage finally. Had to move a bunch of truck-related crap out of the way.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Looking really good Dan!
|
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Yes, truck looks great! Probably nice to have it in your own garage too.
|
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Looks great.
Love the seat. Must be for beach cruising. Kim |
![]() |
![]() |
![]() |
#25 |
Senior Member
![]() ![]() Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,338
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks guys.
Yup, several people have commented on the folding aluminum chair. All I can tell you is I used the same chair in my ‘46 when I was looking for a narrow bench seat for it (3rd row bench from a 12 passenger Dodge Ram van worked great!). It’ll do again for awhile until my stock bench is redone later this month. I can’t wait to see it. Has anyone checking in on this thread installed their own side windows? I’ve watched the YouTube videos a couple times and it doesnt seem that hard, am I being naive? I know to place multiple layers of masking tape on the new paint so I don’t scratch it. I know it’s a bit of a juggling act holding the new guides semi-in-place while holding the side glass and THEN fitting the wind wing assemblies in at the same time. Where are the most difficult points.
__________________
'55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda! |
![]() |
![]() |
![]() |
Bookmarks |
|
|