Restoring Rusty

[Gregski]

Originally Posted by BRUISER

First thought, maybe hydro-dipped with your pattern of choice? Just a thought...

You gonna make me Google that, aint you John? LOL

[Barbecue]

Black crinkle paint would look very professional and badass at the same time.

[Gregski]

Originally Posted by Barbecue

Black crinkle paint would look very professional and badass at the same time.

whoa, "professional and badass", I'm in, ha ha

so I think we are thinking something along these lines, this paint aint cheap it's $10 bucks a rattle can but that's still $250 ahead of a new "aftermarket" dash

Dupli Color

Textured Metallic Coating

"Use on trunks, dashboards, and Toolboxes"

[Gregski]

so checked on our dash this morning and it is coming along nicely

one Top Tip: don't kill yourself scrapping all the padding off of it, let Mr. P do the work for you, soak the left over foam and adhesive with phosphoric acid and go watch some TV

[79sierra]

I am interested to see how this turns out painted! Will you weld/fill the extra holes?

[Gregski]

Originally Posted by 79sierra

I am interested to see how this turns out painted! Will you weld/fill the extra holes?

I wish I was man enough to do so, but when I went through my second midlife crisis I sold my Harbor Freight MIG welder and mask, etc so now I am in between welders, ha ha

so the short answer to your question is no, not at this time, I may re do it at some point in the future, unless someone from the Sac Crew shows up at my doorstep and welds them in for me

[enaberif]

If I was to paint that I would use plastidip. It will be a neat texture and if you don't like it peel it off.

If you want to cover up the holes you could use some JB Weld and just put a backing plate behind the holes for it to grab on to.

Or the other option would be to basically strip to metal then let it rust up a bit then clear coat with stuff that is UV compatible.

[68Timber]

Originally Posted by enaberif

If I was to paint that I would use plastidip. It will be a neat texture and if you don't like it peel it off.

If you want to cover up the holes you could use some JB Weld and just put a backing plate behind the holes for it to grab on to.

That is a most snazzy idea.

[rich weyand]

I would probably do it in black wrinkle paint. Kill the glare as well as the windshield reflection. The Rustoleum stuff isn't too expensive. The thing about Rustoleum is that it dries slow, to produce a more flexible coating. This doesn't micro-crack and let moisture and oxygen in to start rusting. For a dash, which can get very hot in the sun, I think the Rustoleum product is probably the way to go.
http://www.zoro.com/rust-oleum-wrink...Q&gclsrc=aw.ds

[Gregski]

Originally Posted by rich weyand

I would probably do it in black wrinkle paint. Kill the glare as well as the windshield reflection. The Rustoleum stuff isn't too expensive. The thing about Rustoleum is that it dries slow, to produce a more flexible coating. This doesn't micro-crack and let moisture and oxygen in to start rusting. For a dash, which can get very hot in the sun, I think the Rustoleum product is probably the way to go.
http://www.zoro.com/rust-oleum-wrink...Q&gclsrc=aw.ds

Thanks Rich I just placed the order.

[rusty76]

Awesome idea. Waiting on pics

[Country705]

Can't wait for more updates!

[mcmlxix]

Fiberglass the frame. No welder needed to cover holes...
Below is an old thread. I'm sure there are more threads /ideas...
You can still use the black textured paint to keep the glare down or find someone to cover the dash in marine grade UV resistant vinyl.

http://67-72chevytrucks.com/vboard/s...=441581&page=2

http://67-72chevytrucks.com/vboard/s...d.php?t=592107

[Gregski]

snuck out for a few in between kids piano lessons and Halloween haunted house rehersals

a little wire wheel, a little acid, a little more wire wheel, and a bit more acid and it will be all clean and rust free

[68Timber]

Did you decide which way to go with it?

[Gregski]

Originally Posted by BRUISER

Did you decide which way to go with it?

Well since I already am a proud owner of sum JB Weld (if I can find it) I will stick on some backing plates behind the round and oval holes and fill them even with bondo, then shoot the entire dash, both sides, back and belly with my favorite paint over rust primer, and then go with the textured spray paint in black

chose not to go with fiber glass since it would mean I would need to cover the entire dash otherwise there would be mole hills where I attempted to cover the holes, and that just sounds like too much work, even for The Greg.

going for good enuff for goberment work type of result !!!

[68Timber]

Cool, looking forward to seeing how it turns out. I've used a similar spray paint, I think it's from Rustoleum, they call it "hammertone". It hides flaws well and looks good.

[rusty76]

I can't wait to see it

[Gregski]

hid in the garage for a little while in between, Greg, Greg, and Daddy, Daddy... I swear I just want to be left alone sometimes to wrench, look I aint hurtin' no body so just leave me alone

someone mentioned they would like to see the dash installed to make a decision on which finish to pick, and I thought that made sense so today I popped it back in, and I must say this here might could work

first you will notice how much that dash bar covers, it covers both AC vents and two oval holes right off the bat

and really when you is sitting down in the seat all you see is the two oval holes in front of the passenger and well maybe that third oval hole on the ramp to the gauges

I'll share some big shots then some close ups

[Gregski]

ok here are some close ups so we all can see the four round holes section, the six pac hole section, the defrost/heater vents, and the in dash speaker area

so the plan is to cover the speaker with a 4x10 speaker grill of some sorts

now were there defrost vent covers in 1974 or did they come into play in the 80s?

and I aint gonna worry about those 1/4 inch square holes where the clippy clips go cause it's hip to be square!

[68Timber]

Originally Posted by Gregski

so the plan is to cover the speaker with a 4x10 speaker grill of some sorts

The factory 4x10 speaker grill would work pretty good there.

[Gregski]

Originally Posted by BRUISER

The factory 4x10 speaker grill would work pretty good there.

would you know who sells one, I recon my truck didn't have one by the time I got it, perhaps it disintigrated in the sun, and I think same would go for any used ones in the wreckin' yards

[rich weyand]

Originally Posted by Gregski

would you know who sells one, I recon my truck didn't have one by the time I got it, perhaps it disintigrated in the sun, and I think same would go for any used ones in the wreckin' yards

I think he means the grills for the cab corner speakers. The dash "grill" was molded into the pad.

There's a couple of them on ebay. Don't know what your hole spacings are, or if they match.

http://www.ebay.com/itm/SPEAKER-GRIL...-/111584815167
http://www.ebay.com/itm/OEM-1980-Che...-/231653724751

Looking back at your pictures, that looks more like a 6x9 opening. You can just get a generic 6x9 speaker grill. There's a zillion kinds of those out there.

[Gregski]

and here's a looksie from the outside looking in, or as I like to call it the Pebble Beach Concours de Elagance Judges View

whats up with that raised square section above the steering column, thanks a lot GM, The Greg almost pulled this off

[enaberif]

You have solidified my thought regarding doing this to my truck so thanks a lot lol.

I'm wondering what that bump above the steering wheel is for myself.