|
02-26-2014, 11:48 AM
|
#201 |
|
Senior Member
 
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
got my radiator cap looks correct to me
|
|
|
02-26-2014, 11:01 PM
|
#202 |
|
Registered User
Join Date: Apr 2011
Location: Pocahontas, AR
Posts: 554
|
Re: What did you do to your truck today part II.
I started pulling the bed boards today. Just sawzall'd the bolts, no way were they coming loose! Most of the boards were so rotten they came out in pieces. Still have a few left in it. Should get it all pulled tomorrow. Will probably just go with black boards and strips with new stainless bolts.
Chris
__________________
1966 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=615165 1968 GTO http://67-72chevytrucks.com/vboard/s...=1#post7650182 |
|
|
|
02-27-2014, 12:33 AM
|
#203 |
|
Senior Member
Join Date: Apr 2009
Location: SAN FERNANDO VALLE SOL CAL
Posts: 1,064
|
Re: What did you do to your truck today part II.
Been Going Through All Parts in boxes Laying out a Seeing What I need to buy,
To out Fuel Tank to clean out, Replaced All Fuel Lines Drained Radiator Bought a New Red Top Battery hope to Start After rain Blows Through Cali
__________________
1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years |
|
|
|
02-27-2014, 12:45 AM
|
#204 |
|
Post Whore
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: What did you do to your truck today part II.
Drove mine today...and did some burnouts.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
02-27-2014, 02:22 AM
|
#205 |
|
Registered User
Join Date: Oct 2012
Location: Sweden - Gävle
Posts: 76
|
Re: What did you do to your truck today part II.
Last week was premiere for welding, have been practising on the floor now to make it more or less waterproof.
This is the result from trying to patch the kickpanel on passenger side. Tell me what you think!
__________________
Johnny G -----------Vehicles-------------- * Chevrolet C-10 Stepside 1962 * Audi A4 Avant Quattro TDI 2008 * Sachs Compact 50cc 1967 |
|
|
|
02-27-2014, 12:14 PM
|
#206 |
|
Post Whore
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: What did you do to your truck today part II.
Little bondo and yer good! Nice work!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
02-27-2014, 01:36 PM
|
#207 |
|
Registered User
Join Date: Aug 2013
Location: Rochester Wa.
Posts: 395
|
Re: What did you do to your truck today part II.
Howdy, I pancaked my crossmember and started adding tube control arms. Too bad I didnt read enough first and pancaked it 2 inches instead of 1.5 inches, Now I get to notch the frame a few times in front and move my steering box up and put a U joint in my steering shaft,,.......
Im thinking of just cutting a couple flat plate shims and raising my CM the half so I can just bolt everything back up, still thinkin on it though, Take care Andy
__________________
64 C10 Fleetside LB 4 Sp/292 Build http://67-72chevytrucks.com/vboard/s...d.php?t=602438 70 GMC 1500 Fleetside LB 3OT/350 Build http://67-72chevytrucks.com/vboard/s...83#post6767983 76 GMC CCLB Dually Build http://67-72chevytrucks.com/vboard/s...d.php?t=691612 79 GMC 3500 Fleetside LB 454/400 90 Suburban Silverado 4x4 350/700R4 97 1500 Cheyenne Short Fleet 350/5sp Last edited by 64chevtruck; 02-27-2014 at 01:43 PM. |
|
|
|
02-27-2014, 01:47 PM
|
#208 |
|
Registered User
Join Date: Aug 2013
Location: Rochester Wa.
Posts: 395
|
Re: What did you do to your truck today part II.
few moar, I was gonna paint it gold and call it the Goldmember,.... but I ran out of gold about half way through, so behold,,,,, the Greenmember,
Middle pic shows where I ran the exhaust outside the frame rails. They hang below the frame about a half inch still but I think I can still use it,
__________________
64 C10 Fleetside LB 4 Sp/292 Build http://67-72chevytrucks.com/vboard/s...d.php?t=602438 70 GMC 1500 Fleetside LB 3OT/350 Build http://67-72chevytrucks.com/vboard/s...83#post6767983 76 GMC CCLB Dually Build http://67-72chevytrucks.com/vboard/s...d.php?t=691612 79 GMC 3500 Fleetside LB 454/400 90 Suburban Silverado 4x4 350/700R4 97 1500 Cheyenne Short Fleet 350/5sp Last edited by 64chevtruck; 02-27-2014 at 01:55 PM. |
|
|
|
02-27-2014, 05:41 PM
|
#209 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
seam sealer on the joints where the kick panel meets then floor pan makes it all complete and factory correct
|
|
|
|
02-28-2014, 01:05 PM
|
#210 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
i really hate ebay, takin all my money got the pedal and seller took $50 plus shipping for the "insect" screen
|
|
|
|
02-28-2014, 01:06 PM
|
#211 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
like i need a bug screen
|
|
|
|
02-28-2014, 01:42 PM
|
#212 |
|
Registered User
Join Date: Sep 2012
Location: Oregon
Posts: 3,303
|
Re: What did you do to your truck today part II.
HAHAHAHHAHAA!!! glad I'm not the only Fleabay victim!
__________________
GOD BLESS AMERICA! |
|
|
|
02-28-2014, 01:45 PM
|
#213 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
seller didnt take the $50 for the insect screen so i got the pedal and i saw a repop for $25 plus shipping only down $60. oh well
|
|
|
|
02-28-2014, 02:18 PM
|
#214 |
|
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,508
|
Re: What did you do to your truck today part II.
Not quite working on the truck...... BUT.....
My welder stopped working a while back, and I need it to get the patch panels on the truck welded up. Last night I removed the plug, cut about 2 inches off the cable, refitted and replaced the 13A fuse. Plugged it in, the cooling fan came on, no light behind the power switch. I then welded about 300mm on some plate and other than having to set the feed, power etc. I just need to practice loads so that I get the patch panels right first time around. On the way home yesterday I stopped by in a welding shop, and bought my birthday present from Nicola...... £48.00  Should help with cutting and grinding. Mate Martin will be around later for pizza, porn and probing my welder with his tester. Hopefully he will find all is fine. Looking forward to the birthday prezzie he got his boss to bring back from Thailand. When I went there a few years ago, I could not get a plate. He had some new ones made, and the used one comes from his Ford Escort he is having rebuilt in Thailand.  Nice addition to my collection.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
|
|
02-28-2014, 02:58 PM
|
#215 |
|
Registered User
Join Date: Feb 2014
Location: weston
Posts: 122
|
Re: What did you do to your truck today part II.
Tryed getting my windshield installed on my project 61 C30 Longbed today. 2nd day fighting this windshield already. Was hoping to have it done today to move on to wheels and brakes but having gasket issues.
__________________
61 Apache C30 Longbed StepSide Named "BigBoy" Build Page: http://67-72chevytrucks.com/vboard/s...70#post6545970 YouTube Build Videos (Click 2 Watch) |
|
|
|
02-28-2014, 04:03 PM
|
#216 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
i saw where a guy used strips of tape to hold the string and gasket all the way around the glass to hold everything together till he pull the string and rip through the tape as he went around the gasket and just pull the ripped tape off from both sides
|
|
|
|
02-28-2014, 05:34 PM
|
#217 | |
|
Registered User
Join Date: Sep 2012
Location: Oregon
Posts: 3,303
|
Re: What did you do to your truck today part II.
Quote:
__________________
GOD BLESS AMERICA! |
|
|
|
|
02-28-2014, 09:37 PM
|
#218 |
|
Registered User
Join Date: Feb 2014
Location: weston
Posts: 122
|
Re: What did you do to your truck today part II.
__________________
61 Apache C30 Longbed StepSide Named "BigBoy" Build Page: http://67-72chevytrucks.com/vboard/s...70#post6545970 YouTube Build Videos (Click 2 Watch) |
|
|
|
02-28-2014, 09:39 PM
|
#219 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
very nice, and no cracks in the glass
|
|
|
|
03-01-2014, 11:23 AM
|
#220 |
|
Registered User
Join Date: Jan 2011
Location: Tulare, CA
Posts: 733
|
Re: What did you do to your truck today part II.
Not today but a couple of weeks ago. While rebuilding my front suspension I misplaced the Power Steering Bracket I purchased from Captianfab. What an excellent piece - it comes with the bracket, written instructions, a template, and even the necessary grade 8 nuts, bolts & washers, it's a complete kit! Anyway after finishing up my 73 rebuilt disc suspension installation and taking the truck for a shake down cruise (what a mess) the passenger wheel was pointing almost straight and the drivers wheel was pointing left a little - enough for the truck to wander all over the road. The previous owner had already installed a 73 or so power steering box with the stock suspension. Here's the kicker though. He used a cutting torch to blow holes through the frame and then just shimmed the box out using 3/4" - 10 nuts for spacers. Needless to say the frame cracked around the 3/4" nuts. I welded up & ground the cracks in the frame and using Captainfab's template I cut some 3/16" plate to use as a backing plate on the inside of the frame rail. I drilled the holes to match Captainfab's template and bolted it all up. I set my steering wheel straight, using a 4' straight edge on the drivers side tire, turning the tie rod sleeve adjuster I set the wheel sighting straight down the side of the truck, adjusted the passenger tire to match, tightened everything up and took another ride. Truck drives great, steering wheel is centered and the truck doesn't wander. I still need to get it aligned but at least it's drivable. I also need to address a pop or miss at idle & only @ idle. I'm guessing a lean idle condition. Time to drag out the vacuum gauge and tach & monkey with the idle mixture screws.
Now it's time to sit back, relax and have an ice cold margarita |
|
|
|
03-01-2014, 11:26 AM
|
#221 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
love the (6) lug disk brake conversion, stock yet upgraded
|
|
|
|
03-01-2014, 12:06 PM
|
#222 |
|
Registered User
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
|
Re: What did you do to your truck today part II.
Nice job shortbox....!
__________________
`64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip |
|
|
|
03-01-2014, 12:16 PM
|
#223 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
bought me a sewing machine for my benchseat upholstery job, cheaper then paying $1000 and i get a cool machine. now i just gotta pick it up, road trip...
|
|
|
|
03-01-2014, 06:37 PM
|
#224 |
|
Registered User
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,779
|
Re: What did you do to your truck today part II.
I drove my son to the bowling alley so he could do is leauge bowling then off to Home Depot to get some plywood and then a stop for some fries. He loves using the glove box door for his drink.
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
|
|
|
03-01-2014, 06:39 PM
|
#225 |
|
Senior Member
Join Date: Aug 2013
Location: corktown,mi.
Posts: 5,192
|
Re: What did you do to your truck today part II.
family time, very nice
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
