|
06-25-2020, 02:26 PM | #1 | |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
|
06-25-2020, 03:25 PM | #2 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 815
|
Re: Starting a 52 Chevy 3100 Project.
Yes, your LED's could be the cause, as they do not provide enough resistance in the wire to activate the flasher.
You will need to install a resistor into each signal light. If you have a couple of 1157 (dual filament) sockets, try testing them with standard 1157 bulbs and see if that solves the problem
__________________
https://67-72chevytrucks.com/vboard/...=797726&page=3http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781 |
06-25-2020, 03:28 PM | #3 | |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
|
06-27-2020, 01:30 AM | #4 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,954
|
Re: Starting a 52 Chevy 3100 Project.
LEDs have less draw so the flasher unit will flash slow if at all. Try an electronic flasher, it may work better than the cheap step sister bimetallic style that relies on current draw to heat the bimettallic strip.
|
07-01-2020, 11:15 PM | #5 |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
I already have an electronic flashter. LED's only worked wired one way. I am thinking if I didnt have LED lights it wouldnt matter and it would work. Oh well I will swap it the wires at some point.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
07-01-2020, 11:15 PM | #6 |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Put the headliner in tonight.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
07-02-2020, 08:05 AM | #7 |
Senior Member
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,301
|
Re: Starting a 52 Chevy 3100 Project.
Looking very nice!
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
07-02-2020, 08:42 AM | #8 |
Registered User
Join Date: Apr 2009
Location: New Freedom Pa.
Posts: 1,335
|
Re: Starting a 52 Chevy 3100 Project.
I love this build. Your build has saved me a lot of time planning my project , Thank you for such detailed post.
I have been amazed between You , Joedoh , Hussey , Skymags , what you have contributed to this forum.
__________________
Desert |
07-02-2020, 12:43 AM | #9 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,772
|
Re: Starting a 52 Chevy 3100 Project.
gorgeous!
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
07-02-2020, 11:44 AM | #10 |
Registered User
Join Date: Jun 2005
Location: California
Posts: 521
|
Re: Starting a 52 Chevy 3100 Project.
What headliner did you go with and how was the install?
__________________
‘53 GMC COE stock ‘53 Chevy 3100 LSA/TR6060 http://67-72chevytrucks.com/vboard/s....php?t=805949‘ '70 Chevy C10 LWB 350/sm465 ‘74 Chevy C10 SWB 5.3/4L80e, Vintage Air, Dakota Digital, US Mags |
07-02-2020, 11:56 AM | #11 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 815
|
Re: Starting a 52 Chevy 3100 Project.
looks really good
__________________
https://67-72chevytrucks.com/vboard/...=797726&page=3http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781 |
07-02-2020, 01:28 PM | #12 | |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Thanks!!!!
Thanks!!!! Quote:
I went with the stock cardboard one. It only took an hour to put it on. I called around to upholstery shops and the cheapest I found was $300 to do a headliner. It was around $65 because I had to buy the center support but if you have that its only $35. You cant beat that. It would not be difficult to glue some upholstery to it as well. I didn't need anything fancy. Thanks!!!!
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
|
07-04-2020, 10:55 PM | #13 |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Happy 4th of July!!!!! Thank you to all that have fought for our freedom.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 Last edited by 28TudorAZ; 07-05-2020 at 12:48 AM. |
07-05-2020, 10:35 PM | #14 |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Wired up the stereo and the 6x9 and powered 10" sub woofer. The 6 1/2 speakers in kick panels will hopefully be there this week. Sounds pretty good considering it is missing the 2 front speakers. I guess my next task is the door windows. I am not looking forward to that task.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
07-06-2020, 07:40 AM | #15 | |
Senior Member
Join Date: Sep 2016
Location: Hershey, PA
Posts: 1,004
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
__________________
Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition! Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride |
|
07-06-2020, 08:22 AM | #16 |
Senior Member
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,301
|
Re: Starting a 52 Chevy 3100 Project.
I do like your dash. The vents and radio worked great.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
07-05-2020, 11:03 PM | #17 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,772
|
Re: Starting a 52 Chevy 3100 Project.
looking good! I bought a set of QM MB Quart speakers that are 1/8th a sphere enclosed I figure I will put in the kicks of a truck some day. I had two sets and like a dummy I sold one set, I dont even remember to who! They only made em for a minute, and you never see them for sale any more.
I bet your truck sounds good, thats a fine looking 4th of july pic too!
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
07-06-2020, 01:35 PM | #18 | |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
I will since its going to my dad but while channel surfing some bumping might have been coming from my garage. I almost did a newer style double din stereo but glad I did not. I am pretty happy with it. When I put the vents in I tried to mimick the gauge placement. I actually plan to go vintage air so there will be 4 old style matching knobs next to the ignition under the Chevrolet.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
|
07-06-2020, 06:16 PM | #19 |
Registered User
Join Date: Nov 2014
Location: Chino Valley, AZ
Posts: 50
|
Re: Starting a 52 Chevy 3100 Project.
Hi 28Tudor . . . . 1st off - - - a Very Nice Truck .
Great build from start to Driving ; and for one of the best "Causes"...… your Dad , good on you. Ok . . . this is just info : I have installed all LED lights on my Nova ; installed a 'NAPA flasher # 262 , it made my lights work. But, they would flash 'kinda slow' . . . then, I found this Flasher : ….. AUDEW LED flasher (and its adjustable - rate) https://www.amazon.com/dp/B011BTMDQM...novasitecon-20 (better that adding 'load resistors' , to your lights) . . . and, for my LED's it solved my issue - - - could work for you also, and may be just that simple , as changing your flasher (instead of messing with your wires). Then, it's cheap enough . . . (was # 12.00 , when I bought it). Here's my point - - - works great - - - and, I never adjusted a thing just install . . . like 2 years ago . (I like things that work as advertised) . again , very nice truck & . . . . . MAN, it was HOT in Scottsdale on th' 4th . . . . Have a nice day & stay safe ……………. jim |
07-06-2020, 07:45 PM | #20 | |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Quote:
On another note I took it to be aligned today. They said it was near perfect and did not need to be aligned and did not charge me. I aligned it with a tape measure. The did say the idler arm is bad though. It is brand new so I guess I will be swapping that out.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
|
07-23-2020, 12:14 AM | #21 |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
I created the mounts for the rear bumper. 3 inch square tubing.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 Last edited by 28TudorAZ; 07-27-2020 at 08:52 PM. |
07-27-2020, 08:54 PM | #22 |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
Here is the final bumper mounting.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
07-27-2020, 08:56 PM | #23 |
Registered User
Join Date: May 2018
Location: Phoenix, AZ
Posts: 318
|
Re: Starting a 52 Chevy 3100 Project.
I also mounted the A/C controls. I like the way this turned out.
__________________
Project "Eagle Spirit" 52 Chevy http://67-72chevytrucks.com/vboard/s...d.php?t=763085 Project "LS Scout" https://67-72chevytrucks.com/vboard/...d.php?t=844133 |
07-27-2020, 09:53 PM | #24 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,772
|
Re: Starting a 52 Chevy 3100 Project.
great work! i like how the dash came out
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
07-27-2020, 11:20 PM | #25 |
Senior Member
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,557
|
Re: Starting a 52 Chevy 3100 Project.
Both came out great...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
Bookmarks |
|
|