|
04-11-2011, 08:42 PM | #1 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
Was really easy. Just cut it on the side of the frame on the outside. Do a few pie cuts on the inside and hit it with the grinding wheel. Took about 30 min.
|
04-11-2011, 09:03 PM | #2 |
Daring to be Different
Join Date: Aug 2008
Location: Hesperia, Ca
Posts: 4,499
|
Re: Daverods 52
It 30 seconds with the plasma cutter.
__________________
Dennis Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 KUSTOM RIDES FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] I AM WE TODD IT, I AM SOFA KING WE TODD IT |
04-11-2011, 10:52 PM | #3 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
one minute your all oh no you don't need a plasma then the next your all the plasma's the $hit. Just messin. Did my other hole it only took about 15 min. Still need to figure out where to mount my engine. I bought the s10 v8 mounts but now I don't think I can use them. Guys bringing me some s10 15" rims just so I can wheel it around. Just thinking about rear ends? Hit ctrl,alt,delete at the same time the fuzzy part goes away.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-11-2011 at 11:23 PM. |
04-12-2011, 12:05 AM | #4 |
Daring to be Different
Join Date: Aug 2008
Location: Hesperia, Ca
Posts: 4,499
|
Re: Daverods 52
I didn't say Plasma Cutters are $hit. Just mine was when it blew up.
__________________
Dennis Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 KUSTOM RIDES FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] I AM WE TODD IT, I AM SOFA KING WE TODD IT |
04-12-2011, 10:23 AM | #5 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods 52
I think I'll use the plasma since I cant turn my frame over like yours Dave.
And is that the dude from Gold Rush? My 2y/o was watching it with me and said Not Nice.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 Last edited by ruffrida2005; 04-12-2011 at 10:40 AM. |
04-12-2011, 01:37 PM | #6 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
I was just thinking what a pain it would be if I was laying on my back. Who says you can't tip it on its side. Whats a two year old know about whats nice. I thought it was verrry nice. You need to educate that kid. You know your in a good bar when it has chicken wire. Reminds me of my days in the Navy. The good old days. When I did'nt have to work or worry about makin the house payment. When gas was a buck. 1980
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-12-2011 at 01:44 PM. |
04-12-2011, 10:59 PM | #7 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods 52
In 1980 I was still swimmin around looking for a out. But I do remember gas being less then a buck about 15 years ago.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
04-12-2011, 11:34 PM | #8 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: Daverods 52
If I ever get around to my 55, I will have to reread this and see how it's done.
__________________
Alan
Philippians 2:14-16 |
04-12-2011, 11:56 PM | #9 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
I really have no idea. I just post pictures and do what people tell me to do. Where's my bags!!! Got some stock 15" rims today now I need some tires.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-12-2011 at 11:59 PM. |
04-13-2011, 12:01 AM | #10 |
HOW long until spring??
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Re: Daverods 52
I have seen the pictures that You and Strodder post
__________________
69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" |
04-13-2011, 12:10 AM | #11 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
I'm thinking about giving my parts washer an facelift.
|
04-13-2011, 03:46 PM | #12 |
Daring to be Different
Join Date: Aug 2008
Location: Hesperia, Ca
Posts: 4,499
|
Re: Daverods 52
You perv, but that's what I like about you....
__________________
Dennis Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 KUSTOM RIDES FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] I AM WE TODD IT, I AM SOFA KING WE TODD IT |
04-19-2011, 01:11 AM | #13 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods 52
you got that link system yet?
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
04-19-2011, 11:21 PM | #14 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
Gave up waiting for my bags thought I would put my cab on and do my radiator stuff. When you use the s10 frame the radiator hits the gear box so you have to mod the bracket that holds it and use a different radiator. Not sure which radiator I'm going to use? Also had to trim my inner fenders to clear some stuff. Not sure if I cut them enough. I guess I'll find out when I get my bags on. Figured out stock s10 rim don't fit with my spindles for some reason. I guess I need more of an offset. Good enough for now they just don't go on all the way.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-20-2011 at 09:47 AM. |
04-20-2011, 08:38 PM | #15 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
http://cgi.ebay.com/209612-19-X-22-A...-/110414176704
I found this radiator. Its the right size but it says engine oil cooler. Could this also be used as a trans'mission cooler?
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-20-2011 at 10:59 PM. |
04-20-2011, 10:14 PM | #16 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods 52
Yes you can.
That's how mine was hooked up in my 64.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
04-20-2011, 11:00 PM | #17 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
That's good I was sick of looking. Guess ill keep looking its got to be 22 by 19 not 19 by 22.Dumb as. Found this one 40 cheaper and it's 22x19.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-20-2011 at 11:15 PM. |
04-20-2011, 11:03 PM | #18 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods 52
still no 2 link? I've been messing with mine. I got my bungs welded in and was taping out the threads.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
04-20-2011, 11:19 PM | #19 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
ekstensive aka "brothers" They said I could have it cheap not fast. I should have had my bags by now though. I guess they are going to ship it all together. Not as if I don't have stuff to work on. Need to get my engine so I can see how to mount it. I'm thinking I'll be cutting my floor boards. The Iron Duke. Least it has a name, maybe someday it will have a thread.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-20-2011 at 11:24 PM. |
04-21-2011, 01:27 PM | #20 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods 52
Iron Duke is the name of the motor 2.5L.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
04-23-2011, 10:15 PM | #21 |
Member of the longbed union.
Join Date: Feb 2009
Location: Killeen, Tx
Posts: 2,158
|
Re: Daverods 52
nothing happen this weekend? I got a thread for the dime.
__________________
Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759 |
04-24-2011, 10:19 AM | #22 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
Weekend not over yet.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-24-2011 at 10:19 AM. |
04-24-2011, 11:20 PM | #23 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
Filled a bunch of holes. Welded a bunch of cracks in my fenders. Stripped one front fender and painted it to look like the other old one. Turned out better than I hoped. Not done yet.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-24-2011 at 11:22 PM. |
04-25-2011, 08:12 PM | #24 |
Registered User
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
|
Re: Daverods 52
Love the trucks. all of them
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com |
04-26-2011, 10:37 PM | #25 |
SSN 706
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
|
Re: Daverods 52
Got my bags and cups. Have no idea what the brackets/otherthings are for? Picked up a radiator. I'm thinkiing I'll need to get the outlet on the bottom rewelded to make it come out straight. Mounted my front cab mounts to my cab need to weld a piece of metal across the back suport before I can mount the rear one. Gave the ok on getting my engine work done. Still need a trans. I have a 350 and a 400 but I'm thinking a 700 would get better gas milage. Maybe a 2 for one deal.
__________________
Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-26-2011 at 10:41 PM. |
Bookmarks |
|
|