My 52 GMC Build

[FarmerSid]

What kinda burn out's that? LOL! More black than white smoke?

[lower50's]

It's hard with a locked dually with no brakes and no shocks lol

Action shot!!

[FarmerSid]

Ya sure you got all the ford crap off? That IH motor should light er up! Just rubb'in ya!

[lower50's]

Ya np. I was happy it moved. I can't wait to lay some lines all the way down the street. Oh and I found out after it was in 3rd gear

[FarmerSid]

Lol!

[lower50's]

Well I got the gas tank filler neck welded in the fuel tank. Then pressure tested to 10 psi all good. Holes drilled and I'm ready to put the tank in. Just working on mounting my filters and pump then bolt tank in. Also got the brake peddle mounted.

[99 to Life]

nice job, always nice having all the pedals hooked up. that stuff takes longer than people think.

[Advanced Design]

Tank is nice! Not many of us can make our own...well done.

[lower50's]

Originally Posted by 99 to Life

nice job, always nice having all the pedals hooked up. that stuff takes longer than people think.

Thanks 99!! Your right. 2 out of 3 ain't bad so far.

Originally Posted by Advanced Design

Tank is nice! Not many of us can make our own...well done.

Thanks AD

[lower50's]

Made up some stainless brackets to hold my fuel filters, water separator and electric pump. Also got tank mounted, all looks good back there. Then got my new front tires mounted. They are sexy.

[iowaboynca]

Looking good! quick question about the pedals. They come out of the donor S10?

[lower50's]

Thanks. Gas peddle came out of the donor ford cube van. The 2 brake peddles and steering column came out of a mid '80's gm motor home (van front end).

[Dieselwrencher]

Nice work! Nice rubba marks too!

[lower50's]

So Friday I picked up trans cooler. Today I figured out where under the bed it's going. Not ideal but I have no more room up front and limited out back, but it will work just fine. The box says recommended for transmission, fuel, power steering. Fuel? Does any one know why you would need a cooler like this for fuel? Also got my new mirrors installed. I went with the 5x7 mirror because I will be towing with the truck and want to see.

[Dieselwrencher]

With big high out put mechanical fuel pumps, the fuel temps can get crazy hot in a competition truck. I've seen guys that hot lap a lot install fuel coolers to help the fuel system live longer. It's cheap insurance for them when they have $5k or more in their fuel system.

[lower50's]

Originally Posted by Dieselwrencher

With big high out put mechanical fuel pumps, the fuel temps can get crazy hot in a competition truck. I've seen guys that hot lap a lot install fuel coolers to help the fuel system live longer. It's cheap insurance for them when they have $5k or more in their fuel system.

Oh cool. That makes sense. Thanks

[lower50's]

Here is a vid of a small burn out I did before I mounted the fuel pump in the back. Afterwards I realized that I was in 3rd gear. I hope link works.
http://vid51.photobucket.com/albums/...psgy8ojgqr.mp4

[lower50's]

Love this sound
http://vid51.photobucket.com/albums/...pshly2puws.mp4

[lower50's]

Well after a bunch of other fun commitments and off roading holidays. I got back in the garage last night. Made the drive shaft hoop for the front of the shaft. Nothing fancy but good and strong. Then started covering in the transmission hump.

[Advanced Design]

The transmission hump is coming along nicely! What are you bending with?

[lower50's]

Thanks AD. I'm using an air shear and the edge of my work bench with a dead blow hammer. No shear or brake in my arsenal.

[Dieselwrencher]

Originally Posted by lower50's

Thanks AD. I'm using an air shear and the edge of my work bench with a dead blow hammer. No shear or brake in my arsenal.

Nice work there! Sounds like my kind of brake. I've used 2x4's and clamped sheet metal in between them and then broke the material over. A brake would sure make it easier though. Haha

[lower50's]

I picked up my new custom balanced drive shaft today. It's 3.5" OD

[mooseknuckles]

cool build!

[99 to Life]

congrats on the drive. yah lizard skin seems to be really good. I used herculiner and painted it on. real happy with it. I ran out and used some from rustoleum and that stuff is worthless.