Dirty Dianah (No)... Bagged 72 Stepside/LSx/T56

[502ms]

After floors are completed, we will clean the firewall and paint it.

[dragonwrecker]

Yes both my nieces and all three nephews love it lol
Posted via Mobile Device

[502ms]

That's great....why the sad face? Lol
Posted via Mobile Device

[dragonwrecker]

Originally Posted by 502ms

That's great....why the sad face? Lol
Posted via Mobile Device

Ooops wrong smiley
Posted via Mobile Device

[kev2809]

Great build! Whats your idea for paint?
Posted via Mobile Device

[502ms]

Whatever color it is will be a flat or satin finish. My focus is on the underpinnings and drivetrain.
Posted via Mobile Device

[502ms]

Slight change of plans. Going to be looking at a replacement cab on Friday. This should save time on repairs and the like...keeping fingers crossed.

[Xeen]

OH man take a magnet with you, people lie like a big dog, take it slow and look at it a long long time, look and look untill you find all the flaws, you will be glad you took alot of time looking at it.

[RatRod68]

Originally Posted by Xeen

OH man take a magnet with you, people lie like a big dog, take it slow and look at it a long long time, look and look untill you find all the flaws, you will be glad you took alot of time looking at it.

^This. My pops does a lot of restorations on these old trucks and almost every cab has rust issues. Looks like you guys have fixed most of the problem spots.

Places to REALLY look at are around The drip rail, inner lip around the top windshield (where the rearview mirror mounts), outer lip around the entire windshield (Pay very special attention to the corners), and the pinch seam where the wires are usually placed on the firewall (where yours has the rust in the pictures above)

The cab corners, floor pans, inner and outer rockers, and the bottom of the rain tray/cowl panel are all common fixes. Once you move to the dog house, the passenger inner fender under the battery tray always rots out, and I have seen a growing number of rotted radiator supports on the same side under the battery tray. Bottoms of the fenders usually have some too.

[dragonwrecker]

Originally Posted by RatRod68

^This. My pops does a lot of restorations on these old trucks and almost every cab has rust issues. Looks like you guys have fixed most of the problem spots.

Places to REALLY look at are around The drip rail, inner lip around the top windshield (where the rearview mirror mounts), outer lip around the entire windshield (Pay very special attention to the corners), and the pinch seam where the wires are usually placed on the firewall (where yours has the rust in the pictures above)

The cab corners, floor pans, inner and outer rockers, and the bottom of the rain tray/cowl panel are all common fixes. Once you move to the dog house, the passenger inner fender under the battery tray always rots out, and I have seen a growing number of rotted radiator supports on the same side under the battery tray. Bottoms of the fenders usually have some too.

Thanks for the info. I am aware of the Normal fixes like the rockers etc. the reason we decided on another cab is upon closer inspection the top of the a pillars and all the way across the windshield and down the drip rails is extremely rotten previous owner just filled it with silicone and bondo when we were relocating the cab back on the frame we notice a crack and started digging and discovered the extent. For cost and time restraints we are going to get a cab from a friend of mine that only needs rockers and it comes with new ones. It will be much easier and faster to repair and get her back on the road not to mention a lot safer to boot
Posted via Mobile Device

[RatRod68]

Originally Posted by dragonwrecker

Thanks for the info. I am aware of the Normal fixes like the rockers etc. the reason we decided on another cab is upon closer inspection the top of the a pillars and all the way across the windshield and down the drip rails is extremely rotten previous owner just filled it with silicone and bondo when we were relocating the cab back on the frame we notice a crack and started digging and discovered the extent. For cost and time restraints we are going to get a cab from a friend of mine that only needs rockers and it comes with new ones. It will be much easier and faster to repair and get her back on the road not to mention a lot safer to boot
Posted via Mobile Device

Anytime.

Be sure to inspect the same areas. I bought a cab that was the same way. It ended up having the same issues around the windshield with the caulking and bondo. I completely understand getting another cab over fixing that area. It isn't impossible to fix, but it is very time consuming

[502ms]

I inspected the cab. It looks great. I will be getting it tomorrow.
Posted via Mobile Device

[Xeen]

Originally Posted by 502ms

I inspected the cab. It looks great. I will be getting it tomorrow.
Posted via Mobile Device

Awesome, I'm glad you found a good one to work with.

[dragonwrecker]

Originally Posted by MJs69CST

Glad you found a replacement cab. I had to do the same thing on my project.

lol me too will make our job ALOT easier

[502ms]

Originally Posted by MJs69CST

Glad you found a replacement cab. I had to do the same thing on my project.

Thanks Manny!

Xeen, thanks! PS - any luck?
Posted via Mobile Device

[502ms]

So, as I mentioned before, we located a new cab. I went to look at it Thursday, had it delivered on Friday. It is in awesome shape!

[502ms]

So, the three of us lifted it off the pallet yesterday, and got it on Walt's custom made cab stand.


Cleaned it yesterday, and immediately started the fabrication of the Shifter location and custom console.

It is remarkable - the floors, rockers, firewall...everywhere: Excellent shape. No rust at all.

[502ms]

Thanks guys! Walt and I will have fun getting this one together. One thing I forgot to post is my fuel cell and the filler door. I got this idea from Walt when I told him what I wanted to do in the interior.



Laid out, will be above the frame, just like the exhaust. Great fab work Walt.
Posted via Mobile Device

[Square_78]

Tell that guy to be carefully grinding around all that good glass. Those sparks will destroy it.
Posted via Mobile Device

[NewType72]

Lookin really good Leon and yes be very careful around the glass don't wanna ruin it
Posted via Mobile Device

[Xeen]

Leon the new cab looks nice, great score.
You guys are wasting no time, I can't wait to see how the console turns out.

[RatRod68]

Wow! Awesome job buddy!

[dragonwrecker]

thanks for the complements guys we are trying to get er done lol

[502ms]

Hey guys! Thanks for the compliments, indeed! I got a little distracted over the last couple of days. I drove about 200 miles round trip to go buy a sister for Dianah! She will help Dianah get from point B to point F if needed. Something I have always wanted. A C30 Dually. Pics coming soon

PS - the grinding has been done really out of the cab, the angles might look like they are in there, but he is outside.

[RatRod68]

Originally Posted by 502ms

I drove about 200 miles round trip to go buy a sister for Dianah! She will help Dianah get from point B to point F if needed. Something I have always wanted. A C30 Dually. Pics coming soon

Glad you found one!!