35 Years In The Making! - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

G Man · 06-24-2013, 12:43 AM

Well long story John. My wife let me over sleep for the first time. I trained all year and never made it to the start line. Sorry to all my fans and Sponsors.

GM Motor Sports Bud Light KC Paints PPG Napa

G Man · 06-24-2013, 12:57 AM

John Taller tire or rim will work. But not at this time for sure. I have to have the tire up in the fender.That is the look I want lol. I will look at the crossmember and see what I can do. But I have pushed it to the max. I just cut one coil. Only one. If I change the front up to much then the The back has to be raised. And I love the look of it now

Slammed66 · 06-24-2013, 01:43 AM

G man. Have you lookied at sectioning 1.5" out of the front crossmember?
Lets the truck sit low but the crossmember will tuck higher, you can run a taller spring , so, same low stance. But more clearance
Posted via Mobile Device

G Man · 06-24-2013, 10:08 PM

Yea sounds like the plan now. If I can get clearance on the lower control arms that would be great. Oh well I have cut everything else up, why not that too. Less cost this way so that is the plan.

**Captainfab** · 06-25-2013, 12:51 AM

If you need a crossmember to cut up, let me know Bob.

**Captainfab** · 06-25-2013, 12:53 AM

Oh well, there's always next year.......

Quote:

Originally Posted by G Man

Well long story John. My wife let me over sleep for the first time. I trained all year and never made it to the start line. Sorry to all my fans and Sponsors.

GM Motor Sports Bud Light KC Paints PPG Napa

G Man · 06-25-2013, 09:53 AM

That would be awesome John. I will let you know.

**Captainfab** · 07-19-2013, 12:50 AM

Any progress Bob, or has the call of the water been too intense?

G Man · 07-21-2013, 01:32 PM

Oh been down with work. Very busy seems like nothing less than 11 hours a day again. This past week been down with a feaver of 101 102 but worked all week Dock said nothing this weekend and this morning is the first time the sheets were not wet from sweat when I woke up. Feel pretty good not like flew its been hard to get over it. Work not a good thing but too many guys on vac and Injured list anyway. My white Blood cel count is very low but he said a virus will do that. Oh also I also drank a lot of water and he said I need to get a Gatorade in there now and then. So I think I am on the mend. But not much progress on the truck. House is looking great with the new paint and Gutters. Thanks John.

JR25 · 07-22-2013, 11:11 PM

Been watching your thread for a while now, impressive! Hope you get better. Get yourself well and rested so you can get back on the truck!
Posted via Mobile Device

Vernski · 07-23-2013, 12:10 AM

Quote:

Originally Posted by JR25

Been watching your thread for a while now, impressive! Hope you get better. Get yourself well and rested so you can get back on the truck!
Posted via Mobile Device

X2 what he said Mr.G..Vernski

**Captainfab** · 07-24-2013, 01:33 AM

Sorry to hear you've been sick Bob. I imagine the temps we've been having don't help either. Hope you get better soon.

G Man · 08-02-2013, 10:20 PM

Thanks Guys me back to normal now. Feel great

Vernski · 08-03-2013, 12:13 AM

Glad to hear your better Mr G we went to Rathdrum Days Here is a picture of the twins Arny & Danny W/Frank, they don't know I said that..Vernski

G Man · 08-03-2013, 11:30 AM

Nice I am glad to see you get the truck out. Looks awesome

absintheisfun · 08-15-2013, 11:16 PM

Any updates on this one? It is absolutely amazing!

You definitely got the chopped roof and stance perfect!

G Man · 08-16-2013, 02:26 AM

Thanks Absintheisfun. I have been so busy at work. The Freight is out of control and getting a ton of over time. I have to make some decisions on my pickup with the front crossmember. Should just put air ride up front and just move forward. I love the stance also and I will find a way some how. I just need a couple of more inches of ground clearence and I will be happy. Should just buy a Potrebuilt crossmember and be done with it. That is the ticket. It seems like every year I say I will make it to Goodguys and well going to have to wait till next year. I try to make the build fun and when it starts to go the other way I stand back and go boating. Goodguys starts tomorrow in Spokane Wa and I will try very hard to get over there and check it out.

Jmorales3181 · 08-16-2013, 06:39 AM

With your awesome fabrication skills you could easily section the front xmember

just my .02. Very nice truck
Posted via Mobile Device

G Man · 10-05-2013, 10:02 PM

Well its been a great summer here and the boat is put away. Motorcycles are next. Then hope to get back on the truck again.

Vernski · 10-06-2013, 01:41 AM

Quote:

Originally Posted by G Man

Well its been a great summer here and the boat is put away. Motorcycles are next. Then hope to get back on the truck again.

Once my Dad said be careful what you hope for cause it could happen. Good to hear from you Mr.G it's been a crazy summer..Vernski

TJ's Chevy · 10-06-2013, 08:28 PM

Man! Looks killer! Kinda like a classic nascar truck!

G Man · 10-09-2013, 11:17 PM

I hope its been a good one for you Vernski. Good to here from you too.

G Man · 11-28-2013, 01:55 PM

Happy Thanksgiving to all

**Captainfab** · 11-29-2013, 01:21 AM

Same to you and your wife Bob

Anything happening in your garage yet?

Quote:

Originally Posted by G Man

Happy Thanksgiving to all

G Man · 06-28-2014, 10:14 PM

Sorry John been busy with house and work. Been down with a broken ankle but up and working now. Still slow going on the truck but but the build is still there.

06-24-2013, 12:43 AM	#201
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Well long story John. My wife let me over sleep for the first time. I trained all year and never made it to the start line. Sorry to all my fans and Sponsors. GM Motor Sports Bud Light KC Paints PPG Napa

06-24-2013, 12:57 AM	#202
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! John Taller tire or rim will work. But not at this time for sure. I have to have the tire up in the fender.That is the look I want lol. I will look at the crossmember and see what I can do. But I have pushed it to the max. I just cut one coil. Only one. If I change the front up to much then the The back has to be raised. And I love the look of it now

06-24-2013, 01:43 AM	#203
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: 35 Years In The Making! G man. Have you lookied at sectioning 1.5" out of the front crossmember? Lets the truck sit low but the crossmember will tuck higher, you can run a taller spring , so, same low stance. But more clearance Posted via Mobile Device __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

06-24-2013, 10:08 PM	#204
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Yea sounds like the plan now. If I can get clearance on the lower control arms that would be great. Oh well I have cut everything else up, why not that too. Less cost this way so that is the plan.

06-25-2013, 12:51 AM	#205
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,253	Re: 35 Years In The Making! If you need a crossmember to cut up, let me know Bob. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-25-2013, 09:53 AM	#207
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! That would be awesome John. I will let you know.

07-19-2013, 12:50 AM	#208
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,253	Re: 35 Years In The Making! Any progress Bob, or has the call of the water been too intense? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

07-21-2013, 01:32 PM	#209
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Oh been down with work. Very busy seems like nothing less than 11 hours a day again. This past week been down with a feaver of 101 102 but worked all week Dock said nothing this weekend and this morning is the first time the sheets were not wet from sweat when I woke up. Feel pretty good not like flew its been hard to get over it. Work not a good thing but too many guys on vac and Injured list anyway. My white Blood cel count is very low but he said a virus will do that. Oh also I also drank a lot of water and he said I need to get a Gatorade in there now and then. So I think I am on the mend. But not much progress on the truck. House is looking great with the new paint and Gutters. Thanks John.

07-22-2013, 11:11 PM	#210
JR25 Registered User Join Date: Feb 2013 Location: Upstate, SC Posts: 131	Re: 35 Years In The Making! Been watching your thread for a while now, impressive! Hope you get better. Get yourself well and rested so you can get back on the truck! Posted via Mobile Device __________________ 1955 Chevy 3200 my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=582898

07-24-2013, 01:33 AM	#212
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,253	Re: 35 Years In The Making! Sorry to hear you've been sick Bob. I imagine the temps we've been having don't help either. Hope you get better soon. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-02-2013, 10:20 PM	#213
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Thanks Guys me back to normal now. Feel great

08-03-2013, 12:13 AM	#214
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: 35 Years In The Making! Glad to hear your better Mr G we went to Rathdrum Days Here is a picture of the twins Arny & Danny W/Frank, they don't know I said that..Vernski Attached Images

08-03-2013, 11:30 AM	#215
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Nice I am glad to see you get the truck out. Looks awesome

08-15-2013, 11:16 PM	#216
absintheisfun Registered User Join Date: Sep 2009 Location: Carrollton, TX Posts: 23	Re: 35 Years In The Making! Any updates on this one? It is absolutely amazing! You definitely got the chopped roof and stance perfect! __________________ 1967 Camaro - Current Project 1963 C10 - Shop Truck (Next Project) 2008 Saturn Sky Redline - Wife's ride 1993 GMC Typhoon - Getaway truck!

08-16-2013, 02:26 AM	#217
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Thanks Absintheisfun. I have been so busy at work. The Freight is out of control and getting a ton of over time. I have to make some decisions on my pickup with the front crossmember. Should just put air ride up front and just move forward. I love the stance also and I will find a way some how. I just need a couple of more inches of ground clearence and I will be happy. Should just buy a Potrebuilt crossmember and be done with it. That is the ticket. It seems like every year I say I will make it to Goodguys and well going to have to wait till next year. I try to make the build fun and when it starts to go the other way I stand back and go boating. Goodguys starts tomorrow in Spokane Wa and I will try very hard to get over there and check it out.



Register or Log In To remove these advertisements.

08-16-2013, 06:39 AM	#218
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: 35 Years In The Making! With your awesome fabrication skills you could easily section the front xmember just my .02. Very nice truck Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

10-05-2013, 10:02 PM	#219
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Well its been a great summer here and the boat is put away. Motorcycles are next. Then hope to get back on the truck again.

10-06-2013, 08:28 PM	#221
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 35 Years In The Making! Man! Looks killer! Kinda like a classic nascar truck! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

10-09-2013, 11:17 PM	#222
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! I hope its been a good one for you Vernski. Good to here from you too.

11-28-2013, 01:55 PM	#223
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Happy Thanksgiving to all

06-28-2014, 10:14 PM	#225
G Man Registered User Join Date: Nov 2012 Location: Coeur d Alene Id Posts: 126	Re: 35 Years In The Making! Sorry John been busy with house and work. Been down with a broken ankle but up and working now. Still slow going on the truck but but the build is still there.

Register or Log In To remove these advertisements.