51 Chev on a S10 frame, named Dale

[6DoF]

uuugghhhh ... that kills me when you do preventative maintenance and make things worse. at least you still had the stuff to correct it!

[Tempest67]

Time for an update, and a recap on the build.

I/we put about 1000 miles on the truck for our first summer. Other than a faulty ignition module, it ran perfectly.

Overall, I am very pleased, drives straight, is reliable, and relatively comfortable. I did not 'service' the rear leaf spring bushings when I built the truck, but I think if I did it may ride more smoothly.

I noticed a rear axle seal leaking in October, so installed a new one with rear shoes. I guess, when using a rear end from a junk yard, I should have done that in the first place. (for $4 per seal)

I was getting bored, so I decided to paint the 'Supertest' logo on the door (old Canadian Gas Station) and then sand it down to make look old/patina.


This winter I have a few things to do. Nothing major, but something to keep me amused.

1. the motor mounts that I purchased, "made for V8's in a S10", need to be raised about 1/2 an inch, as the stock exhaust manifold just touches the upper A arm. ( I purchased these as I thought it would be a perfect fit, very disappointed)
2. The 'vented' gas cap that I used does not allow the tank to vent, so I will add a 1 way air breather to a blocked tube the sending unit.
3. the interior light switch on the door jamb has been damaged so I need to add another.
4. I am going to install some plastic fender welting between the fenders and the cab/box to reduce some rattles.


Thank you to everyone that has shared their experiences when building their truck, as your help made this build possible. (and eliminated a lot of guess work)

Merry Christmas everyone

[youngrodder]

Looks great.. I dig to door logo. I have enjoyed the off (non driving) season to fix a bunch of little things. Sounds like you are doing the same.

Happy Holidays

Marc

[Tempest67]

Thanks Marc, your seat belts and sound system looks great.

You are right, as much as I enjoy driving it, I do enjoy working on it as well.

I need to sell something before I get another project, but am having a tough time with that.

All the Best for 2022

[olcarguy]

Love your Supertest logo, Remember them from when I was a kid, Always hung around and helped pump gas....

Where in Ontario are you located..Ruffly is good enough....Roy

[6DoF]

is that thing new-vintage or actual vintage? either way, the perfect accessory

[28TudorAZ]

Thats awesome its working great!! Exactly what this kind of build is meant to do.

[Tempest67]

I am afraid it is 'new' vintage as the bottom red part is plastic, but the rest is metal.

It is amazing how many people ask me questions about this truck when I am parked beside high dollar classic Corvettes, Mustangs, Chevelles...etc

When I let the kids sit in the truck the parents always take a pic and are very appreciative. (maybe I will make a old car lover of one of them?)

[6DoF]

Originally Posted by Tempest67

It is amazing how many people ask me questions about this truck when I am parked beside high dollar classic Corvettes, Mustangs, Chevelles...etc

When I let the kids sit in the truck the parents always take a pic and are very appreciative. (maybe I will make a old car lover of one of them?)

you see big-money restored muscle all the time now (cuz it's worth it) and it's nothing new or different. that truck is awesome and something worth looking at!

that's great! i always make sure i downshift and make lots of V8 noises passing any school bus or whatever. can't have them kids growing up making "whooshing" sounds playing with toy cars!

[Tempest67]

that's great! i always make sure i downshift and make lots of V8 noises passing any school bus or whatever. can't have them kids growing up making "whooshing" sounds playing with toy cars![/QUOTE]



That's funny, hard to be cool in a car that sounds like a golf cart

[Father&son56project]

Originally Posted by Tempest67

It is amazing how many people ask me questions about this truck when I am parked beside high dollar classic Corvettes, Mustangs, Chevelles...etc

I have been experiencing the same thing with Project Fargolet. I'll be at a show with my rusty 75 year old truck, parked beside a gorgeous high dollar build, and probably 2/3 of the people will walk past the muscle car and look at the truck instead (and ask me a bunch of questions about it). I should be a little ashamed of the perverse pleasure this gives me, but oddly, I'm not!!!!

[Tempest67]

\
Father and Son, Yes, I agree, it gives me satisfaction as well.

Hope you are driving and enjoying Fargolet this summer.

[Jason 56]

Glad to hear you’re out enjoying the fruits of your labor. My goal is to drive mine once this year before it snows! We’ll see. After putting all the time into mine I really appreciate the patina look. My next one is going to be just that. More of a daily driver. I think you nailed the look and that’s why there is so much interest in it. Just an awesome truck you can drive. Enjoy cruising the rest of the summer!

[joedoh]

what a great truck!

[Tempest67]

Merry Christmas to my Chevy Truck family.

Just a quick update, the truck is running great, put about 1200 miles (not that much) on it this summer and not 1 problem. The only 'work' I can remember is changing the oil, adding air to the tires, and adding 2 drink holders. Oh, and I wiped it down with WD-40 twice.

This truck is meeting/exceeding all my hopes, it drives easy, runs smooth, is comfortable, reliable and I will take it anywhere, anytime.

Once again it is in the driveway with Santa for the season (and a new Elf), but will be back in the garage in January.

Hope everyone is enjoying their trucks, and I look forward to following your builds and seeing your ideas in 2024

Here are some pics from 2023

Cheers,

[28TudorAZ]

Looking great. I am in about the same boat. About 1500 miles. Honestly its my favorite to drive because it drives so nicely. I have actually been thinking about doing that poppys patina coating. I will say nothing rubs off on it now and I do run it through the local self brush car wash every once in while. They laugh when I pull up but it comes out sparkling.

[dsraven]

ok, I checked into the wd40 rumour and found it is a myth. here is a link from the wd40 site.
https://wd40.ca/news/statement-from-...se-product-ban

[Tempest67]

Thanks dsraven and 28Tudor

I wipe down the tires, wheels and keep them clean, but only wipe down the body with a damp rag when it gets dusty. I'm not sure about 'Poppys patina' coating as I dont want the surface to be sticky. Glad to hear you are enjoying your truck, as I just love looking out through that split window. (see pic)

dsraven, I heard the same thing about WD-40, so thanks for busting that myth. I also heard that Brake Cleaner will be banned? yes? no?

[dsraven]

nice job.
I hear that wd40 is going to be discontinued, in Canada anyway, so maybe better check into that and stock up.
how will we ever keep our electric cars going with it, lol.

[dsraven]

I think it's a rumour or they will maybe ban the chlorinated stuff. Dunno.

[Father&son56project]

Great pics! I had every intention of driving down your way in the hopes of seeing your build (and Lower50’s build) at a cruise or show for the last 2 summers, but I have to admit that pure laziness and an aversion to traffic has kept me away. I’ve been doing about 1000 km a year and so far no repairs or breakdowns. It’s great to see the projects getting lots of use!

[Tempest67]

Father&Son - Glad you are using your truck and it is serving you well.

Maybe we, and Lower50's, should meet up in the Guelph area for a lunch sometime this Spring/Summer? (and anyone else in the area)

Cheers

[Father&son56project]

Either that, or a show or cruise night somewhere in the middle (Guelph, KW, etc.). Count me in!

[nvrdone]

Hey Tempest: Santa finished his deliveries so my truck went back in the garage for some long needed love.
Bear claw door latches, new wiper motor, add insulation & sound deadener to the cab, extending the exhaust out the back and many other things.
I did read thru your complete build thread.
One thing I missed - what steering column did you use?
Have a happy new year,
Bruce aka Nvrdone.

[Tempest67]

nvrdone - I used the S10 column. - the downside is that the wiring is visible on those columns, but the positives are, I already had it, the plugs from the wiring harness fit, it has tilt, it has the key, and I like the feel and size of the wheel (not so much the look)

Good Luck with your winter projects, for sound deadening material, I highly recommend the 6 or 8 inch wide 'window flashing' tape at Home Depot that really works well. (has a 'tar like' adhesive that really sticks)

Also, take your time with the Bear Claw latches and make sure the square handle rod fits tight into the latch, if its loose, the handles will droop.

Santa is still out in the rain, and will be til Saturday. (we have had a lot of rain and fog over the last 2 weeks)

Happy New Year