How about some pics of 67-72 Trucks

[EZ4U2C]

Originally Posted by 65-72 chevytoys

I love those wheels do you have a closer shot straight at it them?

No but here's one from the website. They are made by Panther Wheels Co.
The web site is www.pantherwheel.com

[unreconstructed1]

well ya'll I think I win the award for the truck in the worst shape on the thread. here she is

heres another

she'll probably look this way till income tax time. I plan on buying a beater and stripping her down. Right now shes a straight 6 3 on the tree truck, but I plan on puttin a 350 bored/stroked & 5 speed. I'll do all the body work and paint her then I'll post more pics

[71chevylowrider]

Here's mine.

[6772KEVIN]

Here are a few of one of mine.
http://i115.photobucket.com/albums/n...n/MVC-840F.jpg

http://i115.photobucket.com/albums/n...n/MVC-846F.jpg

[dailydragger03]

Here is my DD and my project.

[franky69c10]

nice keep them coming

[texascowboy593]

Hey 71 chevylowrider...If you haven't already you should post your ride for this months TOTM...Sweet ride!

[75Chevy90Kawi]

yeah, that 71 is amazing

[gmc1969custom]

Heres mine. She's been in the Paint/Body shop for 4 months. She should be coming home on Monday.

[2nd_wnd]

mine isnt worthy of being posted in here. If interested in seeing my Piece o'junk click here http://"http://www.67-72chevytrucks.....php?t=226806"

[Inthuwind]

Originally Posted by EZ4U2C

Here's mine and I'm still working to improve it..................

I LIKE IT!!!!!!!!!!!!

[lt1bbody]

here is my '68 with 307 and a powerglide.

[nvrforgotten52]

this is my 69 cten swb daily driver

[AKChevyman]

Here is mine before and now in progress as it sat today when I put the cab on.

[Raguemoe]

Some pics

[71chevylowrider]

Hey thanks for the great compliments you guys, I was thinking about it, I mean it is RED! But I gotta admit after seeing some of the beauties that were already posted I kind of blew it off, but now that you have renewed my faith, what the heck, I guess I will, I mean, it may not be the nicest one in the bunch, but I'm pretty sure its' not the worst.

[jhow66]

My truck and son's Blazer:

[72LoBurb]

Originally Posted by Already Gone

WOW!! My 500th POST>>>>>>>>>

Thanks for the compliment on my truck and I too think its a fine truck and I do love it but things can always be improved. As money allows I am going to do a 3 1/2 frt & 5 rear drop and put 17's on her. I also want to spruce up the interior and am still debating whether put a 700R4 or change the rear axle to 3:08 from the 3:73's so I can get some reasonable fuel mileage. The wooden floor is shot and the inner box fenders are rusted and banged up so that has to be redone too. I drove the truck to the Red Deer Super Run last August when the gas was at its highest at 1.18 per litre ( 5.38 a gallon for you guys south of the border ) and to go from Saskatoon to Red Deer and back and do a little cruising in Red Deer it cost me 325.00 for gas and I only did around 900 miles total..

Yeah, I guess it is true, they are never done.
Go with the 700r4, I did it in my burb and pull down 17-18 mpg(imperial gallon) with a poorly tuned Edelbrock on a worn out 350 w/3.73's.
I wish I would have run into you in Red Deer, it's always good to meet more people into these trucks. I was only there Saturday and couldn't justify the amount of $$$$ they wanted to put it in the show; the 'burb sat in the parking lot.

[chapster]

Here is a pic of my ride that never seems to be finished.





Looking to upgrade to 18" wheels. Anyone running 18's with 6" rear/ 4.5" frt drop? if so what offset and back spacing. Pics would be great.

[WinDancer]

This is my 69 GMC short bed, currently in the last stages of completion.

Pic 1 is the front end with the motor/transmission in place for final fitment and measurements for trans and carb linkage, and the new drive line.

The windshield is out to replace old, deteriorated metal.

Pic 2 is the 400hp 396 replacing the old 350. It will include the 400 turbo replacing the old 350 trans.

Adding new Hooker ceramics and full 3" flowmaster exhaust straight out the back. If I can work it the exhaust will exit at least partially through the bumper. Also doing the HEI.

Pic 3 shows primer over the welded-up holes that held the C10 insignia, being replaced by Chevelle 396 emblems. The top has been chopped 4 full inches. The front and rear are both lowered 5 inches.

Paint is DA Cayman [I know, I know, but even Ford does something right once in a while] done in 2005

The gas tank is under the truck and fills through the drivers rear marker light. The old filler hole was welded up before paint. A power antenna was frenched in on the passenger side behind the door, that old hole was also welded up before paint.

5 Lug custom 8 inch wheels and disk brakes front and rear.

Pic 4 is a quick shot of the completely redone interior that includes a Grant wood wheel, 200 watt kick-panel speakers, Pioneer am/fm/cd, chrome glove box, fully upholstered head liner, dash and door panels and new carpet. It has matching 60/40 seats. The dash is the tach and gauge option.

A new Cowl hood from Classic Heartbeat is in for paint. A new 4 core radiator with dual electric fans is set to go in this trip too.

The gentleman you can see through the windshield frame is Bill Strobl- one of the best Chevy mechanics on the planet. His shop is here in Washington a short distance from our place.

I will replace the tires after I have a few miles on the rework. The truck has 4.11s and is a screaming ***** on the freeway. Much larger tires should take care of that.

I will get more and better pics added when she comes home.

You folks and Bill are the only ones who care about any of this [if you don't count every 15 year-old-boy I pass]. I was hooked after my first visit here. Good on-ya all!

Dave

[mike nutt]

here's mine , still not finished yet !!

[nitrofn]

Here is my 69 project from hell

[jamie72]

before..



after..

[jamie72]

wifes truck.. inprogress..

[rancid]

Originally Posted by mike nutt

here's mine , still not finished yet !!

very nice, like the look with that bed.