maxxy's 81 bagged c10 build - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

luifer76 · 03-23-2012, 11:43 PM

Quote:

Originally Posted by maxxxy

Got my truck out of the barn and washed months of dirt off!
Here's a picture.

Posted via Mobile Device

Nice!....

mooseknuckles · 03-24-2012, 09:22 AM

x2 on "z'ing" the frame....but I'd go 3" to make it worthwhile...in case you decide to get bigger wheels etc...

mineralgrey01gt · 03-23-2012, 02:18 AM

Damn man, truck looks like mine almost. I say z the frame. Mine is if you want some pics of it and such I can get them for you. Also before you ask I didnt do the work myself. I purchased the truck bagged already.

maxxxy · 03-28-2012, 12:24 AM

Woah mineralgrey! They're like twins! Lol.
Well since I took out the a/c, I replaced the small front tires, now I'm running 235/70/15 all around.
Today when I got home from school, I did a little work...

The crossmember is out!!!!
It's too late to turn back now! Haha.
I figure as of right now I'm going to section the crossmember 1.5".
I chose to do the x-member instead of the Z because I'm not wanting really an extreme drop, and this will keep my lca's from dragging off. And if I want to z it later, I can either just do a small Z or sell the crossmember. I like the peace of mind that this is a reversible option, even though I don't think this truck will ever see stock again.

luifer76 · 03-28-2012, 09:57 AM

cool glad to see you getting some work done on the truck bro looking good....

made2drag · 03-28-2012, 12:02 PM

great idea! if you had to sell it one day, no one would ever know it was sectioned....i dont think you'd sell it after all this work though. and i wouldnt blame you.....sweet truck, you've got skills man, keep the pics coming!

maxxxy · 03-30-2012, 12:57 AM

I took the crossmember to the car wash and removed about 5 lbs of grime! Lol
Then I tried out my $12 sandblaster from Attwoods. It did pretty great for the price. It took the old paint right off. Though it had trouble getting the surface rust off, and couldn't remove dirt or grime at all. But overall it works. Then I drew on all my marks so it's ready to cut and weld! I'm gonna wait til early next week when this guy is gonna help me use his plasma cutter.
Posted via Mobile Device

made2drag · 04-02-2012, 10:26 AM

dude, your accomplishing a ton of complicated mods! i wish i was brave enough to section mine. great progress, keep us updated with pics. what color are you going with on the truck?

mineralgrey01gt · 04-02-2012, 10:32 AM

This build is coming along nicely. Great work man, wish I had those skills

luifer76 · 04-03-2012, 10:04 AM

looking good maxxxy... keep them pics coming...

maxxxy · 04-05-2012, 04:23 PM

Got something in the mail today!

Posted via Mobile Device

luifer76 · 04-05-2012, 07:44 PM

nice!...

maxxxy · 04-13-2012, 07:32 PM

Thanks!

I guess it's too late to turn back now!!

Posted via Mobile Device

baclay9 · 04-13-2012, 08:12 PM

I don't know anything about this stuff so could you explain something to me? How is this going to allow you to get lower. Shouldn't the bottom of the crossmember have been brought up not the top brought down? I'm just not seeing it I guess...

joe231 · 04-13-2012, 09:15 PM

Bringing the top down brings the bottom up in relation to the frame
The piece cut down is where the frame sits on the crossmember so this brings all the suspension higher which lowers the truck...
Posted via Mobile Device

maxxxy · 04-13-2012, 09:33 PM

The three bolt holes on the outside on each side is the surface that bolts to the bottom of the frame. Moving that section down will allow you to slide the entire assembly up on the frame rails.
Posted via Mobile Device

baclay9 · 04-13-2012, 10:01 PM

I see it now. Thanks for pointing that out. I just couldn't put it together.
Posted via Mobile Device

maxxxy · 05-01-2012, 10:24 PM

Got my crossmember all welded up!! It's all welded then I ground down all the welds and it looks pretty good.*

The first picture is of some reinforcement I welded into the bottom to better support a jack.

shoob · 12-10-2012, 12:15 AM

Quote:

Originally Posted by maxxxy

Got my crossmember all welded up!! It's all welded then I ground down all the welds and it looks pretty good.*

The first picture is of some reinforcement I welded into the bottom to better support a jack.

im new to this as well...but wouldnt this make the engine sit higher? and in turn change the tail shaft angle on the trans?

maxxxy · 12-10-2012, 04:13 AM

Quote:

Originally Posted by shoob

im new to this as well...but wouldnt this make the engine sit higher? and in turn change the tail shaft angle on the trans?

The position/location of the motor doesn't move at all. The motor mounts attach to the upper face of the crossmember. Think of it like this, the section that is cut out stays bolted to the frame in factory position, and you move the entire suspension upwards around the cut out piece 1.25 inches, then weld back in place.

Its really hard for me to explain, unless you're just looking at it. I'm a very visual person(thus my picture-loaded thread) But all in all, the only thing that is in a new spot afterwards is the suspension and steering moved up 1.25".

truckzilla · 12-10-2012, 12:48 PM

I like that pressure gauge! Send us a picture when you've installed it, if you would!

mcbassin · 05-01-2012, 10:58 PM

Very nice work on the crossmember Max. Lot of time and work but I'm sure it'll be worth it to you.

mcboomport · 05-01-2012, 11:49 PM

Very nice job!
Posted via Mobile Device

Nobaddaze · 05-02-2012, 02:06 AM

That x-member is looking awesome man!!! Excellent work.

broey · 05-03-2012, 11:34 PM

awesome work on the pancake!

03-24-2012, 09:22 AM	#2
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: maxxy's 81 bagged c10 build x2 on "z'ing" the frame....but I'd go 3" to make it worthwhile...in case you decide to get bigger wheels etc... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

03-23-2012, 02:18 AM	#3
mineralgrey01gt Registered User Join Date: Feb 2012 Location: Maurepas, LA Posts: 55	Re: maxxy's 81 bagged c10 build Damn man, truck looks like mine almost. I say z the frame. Mine is if you want some pics of it and such I can get them for you. Also before you ask I didnt do the work myself. I purchased the truck bagged already.

03-28-2012, 12:24 AM	#4
maxxxy Registered User Join Date: Jul 2010 Location: Norman, Oklahoma Posts: 557	Re: maxxy's 81 bagged c10 build Woah mineralgrey! They're like twins! Lol. Well since I took out the a/c, I replaced the small front tires, now I'm running 235/70/15 all around. Today when I got home from school, I did a little work... The crossmember is out!!!! It's too late to turn back now! Haha. I figure as of right now I'm going to section the crossmember 1.5". I chose to do the x-member instead of the Z because I'm not wanting really an extreme drop, and this will keep my lca's from dragging off. And if I want to z it later, I can either just do a small Z or sell the crossmember. I like the peace of mind that this is a reversible option, even though I don't think this truck will ever see stock again. __________________ Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp

03-28-2012, 09:57 AM	#5
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: maxxy's 81 bagged c10 build cool glad to see you getting some work done on the truck bro looking good.... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

03-28-2012, 12:02 PM	#6
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: maxxy's 81 bagged c10 build great idea! if you had to sell it one day, no one would ever know it was sectioned....i dont think you'd sell it after all this work though. and i wouldnt blame you.....sweet truck, you've got skills man, keep the pics coming! __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

03-30-2012, 12:57 AM	#7
maxxxy Registered User Join Date: Jul 2010 Location: Norman, Oklahoma Posts: 557	Re: maxxy's 81 bagged c10 build I took the crossmember to the car wash and removed about 5 lbs of grime! Lol Then I tried out my $12 sandblaster from Attwoods. It did pretty great for the price. It took the old paint right off. Though it had trouble getting the surface rust off, and couldn't remove dirt or grime at all. But overall it works. Then I drew on all my marks so it's ready to cut and weld! I'm gonna wait til early next week when this guy is gonna help me use his plasma cutter. Posted via Mobile Device __________________ Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp

04-02-2012, 10:26 AM	#8
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: maxxy's 81 bagged c10 build dude, your accomplishing a ton of complicated mods! i wish i was brave enough to section mine. great progress, keep us updated with pics. what color are you going with on the truck? __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

04-02-2012, 10:32 AM	#9
mineralgrey01gt Registered User Join Date: Feb 2012 Location: Maurepas, LA Posts: 55	Re: maxxy's 81 bagged c10 build This build is coming along nicely. Great work man, wish I had those skills

04-03-2012, 10:04 AM	#10
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: maxxy's 81 bagged c10 build looking good maxxxy... keep them pics coming... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

04-05-2012, 04:23 PM	#11
maxxxy Registered User Join Date: Jul 2010 Location: Norman, Oklahoma Posts: 557	Re: maxxy's 81 bagged c10 build Got something in the mail today! Posted via Mobile Device __________________ Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp

04-05-2012, 07:44 PM	#12
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: maxxy's 81 bagged c10 build nice!... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

04-13-2012, 07:32 PM	#13
maxxxy Registered User Join Date: Jul 2010 Location: Norman, Oklahoma Posts: 557	Re: maxxy's 81 bagged c10 build Thanks! I guess it's too late to turn back now!! Posted via Mobile Device __________________ Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp

04-13-2012, 08:12 PM	#14
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: maxxy's 81 bagged c10 build I don't know anything about this stuff so could you explain something to me? How is this going to allow you to get lower. Shouldn't the bottom of the crossmember have been brought up not the top brought down? I'm just not seeing it I guess...

04-13-2012, 09:15 PM	#15
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: maxxy's 81 bagged c10 build Bringing the top down brings the bottom up in relation to the frame The piece cut down is where the frame sits on the crossmember so this brings all the suspension higher which lowers the truck... Posted via Mobile Device __________________ *CHEVY ONLY*

04-13-2012, 09:33 PM	#16
maxxxy Registered User Join Date: Jul 2010 Location: Norman, Oklahoma Posts: 557	Re: maxxy's 81 bagged c10 build The three bolt holes on the outside on each side is the surface that bolts to the bottom of the frame. Moving that section down will allow you to slide the entire assembly up on the frame rails. Posted via Mobile Device __________________ Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp



Register or Log In To remove these advertisements.

04-13-2012, 10:01 PM	#17
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: maxxy's 81 bagged c10 build I see it now. Thanks for pointing that out. I just couldn't put it together. Posted via Mobile Device

05-01-2012, 10:24 PM	#18
maxxxy Registered User Join Date: Jul 2010 Location: Norman, Oklahoma Posts: 557	Re: maxxy's 81 bagged c10 build Got my crossmember all welded up!! It's all welded then I ground down all the welds and it looks pretty good.* The first picture is of some reinforcement I welded into the bottom to better support a jack. __________________ Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp

12-10-2012, 12:48 PM	#21
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: maxxy's 81 bagged c10 build I like that pressure gauge! Send us a picture when you've installed it, if you would!

05-01-2012, 10:58 PM	#22
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: maxxy's 81 bagged c10 build Very nice work on the crossmember Max. Lot of time and work but I'm sure it'll be worth it to you. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-01-2012, 11:49 PM	#23
mcboomport Registered User Join Date: Oct 2010 Location: Portland, OR Posts: 320	Re: maxxy's 81 bagged c10 build Very nice job! Posted via Mobile Device

05-02-2012, 02:06 AM	#24
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: maxxy's 81 bagged c10 build That x-member is looking awesome man!!! Excellent work. __________________ Hard work has a future payoff. Laziness pays off now. My Build

05-03-2012, 11:34 PM	#25
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: maxxy's 81 bagged c10 build awesome work on the pancake! __________________ Squarebody Syndicate

Register or Log In To remove these advertisements.