|
07-14-2016, 05:30 PM | #1 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Not got much done this week due to a problem with the front brakes on my wee Morris Minor, but thats sorted so hopefully I'll get a full weekend at the truck (I do have to bleed the brakes on the Land Rover as it has an MOT next week).
Anyway, I got the rear axle fully painted last night and tonight I got the primer on the underside of the front. Also got the floor patch panel tacked in place as well as the rear door pillar bottom Tell you what its a bloody awful fit! |
07-16-2016, 07:35 PM | #2 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
After spending some time working on the Morris, I made some good progress on the truck today.
Thats the floor patch panel, rear door pillar repair, front door pillar repair, inner lower cowel and the front cab mount all fitted and tacked into place Hopefully the outter rocker will finally be welded into place soon but looks like I will have to cut it up to make it fit just like the other side Also got the front axle painted and cleared. |
07-17-2016, 08:35 AM | #3 |
Registered User
Join Date: Jun 2016
Location: Leatherhead, Surrey
Posts: 15
|
Re: The Super Duper Haggis Hauler
Nice progress, keep it up!
__________________
My latest ride: https://bit.ly/2LOIoCZ SWMBO's surprise: https://bit.ly/2ouIJBD What to buy when you love old Chevy's and need an MPV: https://bit.ly/2wCobuV The daily: Now a Ford Ranger Double Cab - First road trip here: https://bit.ly/2owS24d GRIZZ, CRAIG and DENNIS’ 2018 Humdinger of a USA Road Trip: https://bit.ly/2Ca3jB4 |
07-18-2016, 04:07 AM | #4 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Something that I only noticed yesterday was that the window runner in the below photo of my passenger door is missing from the drivers door for some reason.
The fact that its missing doesn't seem to effect the windows operation though it does rattle about (I thought because all the seals were missing). Out of interest does anyone have a spare they dont need? |
07-19-2016, 05:32 PM | #5 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
|
07-20-2016, 04:14 PM | #6 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: The Super Duper Haggis Hauler
Looking good Bill great progress
It appears non of the new panels fit too well but you're doing great with them anyway, keep at it
__________________
Getting old sucks.............but it sure beats the alternative |
07-20-2016, 09:17 PM | #7 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: The Super Duper Haggis Hauler
Nice job using the leftovers to fill the speaker hole.
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram |
07-21-2016, 09:24 AM | #8 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
|
07-21-2016, 09:23 AM | #9 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Im just hoping the front fenders and bed panels are a better fit. Im not expecting perfection, I know they will have to be fettled but so far the fitment has been really poor.
|
07-21-2016, 09:28 AM | #10 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
|
07-28-2016, 09:42 AM | #11 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Door number 2 repaired
The skin on this was not well made. It fits, where it touches - mostly! It will need some additional work to get it right. Spent most nights this week fitting Captainfab's steering box adaptor. Just got to check my work then weld it up. Suspension gear is finally on its way to me so the next two weeks, will hopefully, see a rolling chassis as Im off on holiday. |
07-29-2016, 03:05 AM | #12 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Well thats the adaptor for the steering box all fitted.
That was a bit of a marathon. Not the easiest installation Ive ever done. Nothing to do with the kit I must add, its excellent. But I found it hard to get it all to line up mainly due to the internal strengthening inside the chassis. Cutting it out was difficult as I dont have gas burning gear and the head of my plasma cutter was too big to get to the middle. But its done now and I heard yesterday my suspension if finally on its way so hopefully the next 2 weeks will be productive. |
08-04-2016, 07:38 PM | #13 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
|
08-04-2016, 10:29 PM | #14 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: The Super Duper Haggis Hauler
What colour will you be painting the magic chain? Black to blend in, or an accent colour to make it pop?
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
08-05-2016, 04:05 AM | #15 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
The magic chain has long since been binned and the bulge in the chassis knocked out!
|
08-05-2016, 06:28 AM | #16 |
Registered User
Join Date: Apr 2012
Location: Searcy, AR
Posts: 4,203
|
Re: The Super Duper Haggis Hauler
Been a bit since I've checked in... Great progress!!!
__________________
DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD |
08-05-2016, 01:34 PM | #17 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,564
|
Re: The Super Duper Haggis Hauler
Looking great Bill.
Well done.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
08-05-2016, 08:01 PM | #18 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
My better half and I were away last weekend at friends wedding in the borders (of Scotland - though it had a surprising Texan theme to it, long story) so little time spend on the truck then.,
However, as Im off for 2 weeks I did, as I said last night got a lot done to the chassis. However on arriving home Monday there were a couple of boxes waiting for me. And what was in them, well first parts of a much larger shipment (that seems to have taken an age to get here) So thats the rear brakes sorted. The front and rest of the suspension should be here on Monday but i wont get anything done now till then as Im off to my sister in laws tomorrow, home late Sunday. However, I did fit this to the the chassis tonight. I like the contrast between the colours. What to you guy's think? (The rear axle will be he same but I thing the rest will be black) Last edited by MacQuigley; 08-05-2016 at 08:08 PM. |
08-09-2016, 07:52 PM | #19 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Well, today has not been without its problems, but eventually i have managed to fit one front corner!
I had to fit the old spring and until I order 17" wheels Ive had to take the caliper off but at least Im one 1/4 the way to a rolling chassis - almost! Still got some shocker issues to resolve and a pinion bearing problem to fix, but Im getting there! At times like this, I miss my land rovers! |
08-10-2016, 01:15 AM | #20 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,564
|
Re: The Super Duper Haggis Hauler
Quote:
I am very impressed and pleased for you and your progress.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
08-11-2016, 04:55 PM | #21 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
|
08-16-2016, 04:18 AM | #22 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Now that the chassis is mostly complete (more about that shortly) I got back into the second side of the cab.
Last night I got the outer rocker tacked in place Im not 100% happy with the alignment between the rocker and the door bottom but there was little or no more movement possible on the rocker so I will leave the final fitment until all the repairs are complete So whats left to do on the chassis. Well the panhard bar I bought doesnt fit, so I need to chase POL (again) on that. The shockers on the front are too short and the rear dont fit the mounts. The rear are easy to sort, I just need to cut the steel sleeve and they will fit. I think it will be easier to find something correct in the UK for the front so when my mate gets back from holiday I'll have a chat with him (he owns a small auto accessory shop and should be able to help). Still not been able to get the front springs to fit but that can wait until I have the full weight of an engine in place. At the moment Ive got the 2" lowered springs fitted and to be honest Im interested in seeing what that looks like with the engine in. (though to get the full impact of that and the 21/2" lowered spindle I'll need the new 17" or 18" wheels - something else to buy ). One worrying thing is the fact that the steering stop on the Wilwood spindle hits the lower POL control arm rather than the steering stop on the control arm. It will work if I slacken off the ball joint nut but that doesn't look right to me. But again I think I need to wait until I have the weight of the engine on the frame before I tighten up all the suspension. Also need to take the rear axle off to change the bearings. I was able to source these in the UK but the inner pinion bearings I was sent were wrong and I needed a rolling chassis before the replacements would arrive, but thats no big issue. Anyway, seeing as I was on holiday the last two weeks I did take some time out. The first two weekends my wife and I were away (2nd weekend the grand kids tagged along) but the weekend past my youngest and I made our annual camping trip to a wee town about 40 miles from here where they hold an annual car show. The show is largely old British cars, as you would expect, but this year there was a reasonably good turn out of American steel. Thought you guy's would like to see some pics, though I warn you there was only one Cheyy truck (thought there was a really nice panel van there but I dont seem to have a picture of it for some reason) |
08-16-2016, 05:59 AM | #23 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: The Super Duper Haggis Hauler
Great progress Bill, I had a similar issue with my outer rocker (only got the passenger side done so far), I couldn't seem to get enough gap at the front, I eventually tweaked the rocker panel to get it. The car show looks great too (love the black Labrador behind the Z28 doing what Labradors do best!).
How much short are your front shocks, would it not be easier to drop the upper bracket? They look like they would grind off and reweld. My shocks (also from POL) were too long and had more stroke than I had suspension travel so I had to raise the bracket.
__________________
Getting old sucks.............but it sure beats the alternative |
08-16-2016, 06:12 AM | #24 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Hi Ian,
I based the position of my shock mounts on the section of frame that came with the front clip I got. It looks like whoever did the work on that truck used longer shocks hence the higher mounting point. Considering Ive got the frame all painted Id rather investigate the possibility of getting a longer shock first especially as getting them off will not be easy (I welded them on to STAY!). However, Im probably better waiting until Ive at least got the engine in before I do anything. That way I know everything will be compressed. Though another problem I forgot to mention is that the POL engine perches are too tall! Another mod there I think. Cant make my mind up about POL. One minute they are great and responding. Next minute, nothing! I guess it will all work out in the end!!!!!! |
08-16-2016, 04:56 PM | #25 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: The Super Duper Haggis Hauler
Back to the rocker tonight.
Like the drivers side I had to make a few cuts to get the door bottom to fit All welded up now and fortunately the front only required a very small cut. Then it was time for the cab corner. I hate making cuts like this Hopefully this is the last major surgery it needs. But unfortunately I found it needed some minor surgery Id missed. Oh well something else to keep me out of trouble for a bit! |
Bookmarks |
|
|