68 S/C update.....

[CoggedBelt75]

Nothing sounds finer than a whiner!!

[Hart_Rod]

Originally Posted by VA72C10

sounds good...so where's the burnout video? You have plenty of extra rubber to put on there

Here you go...

Originally Posted by Rokcrln

Might want to check that Alt. bearing, sounds a bit dry!
I agree where is the "Burn out Video"!

Kevin
LFD Inc.

Since, I've retired the whine reminds me of sound the helicopter turbine....

Originally Posted by FRENCHBLUE72

She sounds great id bet she sounds really nice rolling down the hi way..

This is the best I can do right now. I'll get a better one next time.

Originally Posted by jgh64pkup

Thanks...

Originally Posted by CoggedBelt75

Nothing sounds finer than a whiner!!

OK, here's the burn out video. It's my first video so it's kinda weak....it's with my my slicks and probably should have waited until I put the PHATTY's back on....I still need to do some more motor tuning and then I'll do another one, but for now this will have to do .

YouTube- 6T8 ZZZZ

[sdailey]

That's too cool Rob. I love the "whine".

[msgross]

wow, that thing whines more than my 7 year old!


sounds like a dying cat under the hood at idle...

[VA72C10]

Very nice. Thanks for obliging

[jgh64pkup]

man why are those et streets so hard to get to smoke
i had the same problem

[ChuckDriver]

AWESOME!! Thanks Rob.

[bigguy69]

i like it!!!!!!

[sourkraut]

do you serve cheese with all that whine??

[Sparkplug79]

Dang Rob why didnt ya tell me you were doin burn outs haha coulda brought the vette and the ole 87.

[djracer]

It sounds sweet Rob you need to take it to the track and see how it does.

[Hart_Rod]

I've been working off and on trying to figure out a cool, but fairly simple fuel filler modification for under the bed gas tanks. I've read a lot of threads and have seen some really cool stuff that people have come up with including in bed, tail light and side marker light. Each one of these requires modifications that require cutting and welding on the bed. Since my truck is already painted and the bed has been linered, I gave myself some pretty tight parameters on what I wanted to create, such as:

1. It should be a fairly simple mod that most people could accomplish with minimal skill
2. It should be bolt on
3. Absolutely NO cutting or drilling would be done on the bed (for painted trucks)
4. It must use existing holes
5. And it needed to be fairly cheap

Well, here's what I came up with. I still have to do some fine tuning, but I'm very happy with how it's turning out. Once I go smooth with it, I'll probably do a write up on the install. What da ya think????

** Marine fuel filler cap - http://www.westmarine.com/webapp/wcs...allpartial/0/0 **

[0331grunt]

I like the idea. More pics? Info? Keep the ideas coming!!

[oldblue1968chevy]

do you have to do any kind of cutting to inside of bed.....willl gas pump fit in there even lol?

looks clean do a faq asap!

[big_al_71]

Rob, that looks like a hinge from a kitchen cabinet, Is it?

[sgaylord]

Nice set-up, I like the requirements and I'm definitely interested. I too have been thinking about something along these lines. I like all the mods I have seen (in bed, tail light, stake pocket, and marker light). I have been leaning towards the stake pocket or marker light. Some of the tail light mods I have seen look like they need more rigidity or the light could open going down the road. I can't do the bed floor because like yours my bed has a liner. How flimsy is the marker light when you open it to add gas? Are you using a cap that does not need to be removed to fill the tank? I think you would almost have to.

[Hart_Rod]

Originally Posted by 0331grunt

I like the idea. More pics? Info? Keep the ideas coming!!

I'll post more once I get it fine tuned.

Originally Posted by oldblue1968chevy

do you have to do any kind of cutting to inside of bed.....willl gas pump fit in there even lol?

looks clean do a faq asap!

None, nope, nada, Zilch!! It fills up great.

Originally Posted by big_al_71

Rob, that looks like a hinge from a kitchen cabinet, Is it?

Probably so. I was walking down an aisle at Home Depot and picked it up.

Originally Posted by sgaylord

Nice set-up, I like the requirements and I'm definitely interested. I too have been thinking about something along these lines. I like all the mods I have seen (in bed, tail light, stake pocket, and marker light). I have been leaning towards the stake pocket or marker light. Some of the tail light mods I have seen look like they need more rigidity or the light could open going down the road. I can't do the bed floor because like yours my bed has a liner. How flimsy is the marker light when you open it to add gas? Are you using a cap that does not need to be removed to fill the tank? I think you would almost have to.

It's not flimsy at all. It has a very strong spring coupled with an "over-center" mechanism, which spring loads the open and closed positions. They way my setup is designed, you have to glue in the screw for the front hole, but on the rear hole you have the option of gluing it in OR you can put the screw into it's original keeper. Either way, it's not coming open. Screwing it in the orignal keeper will also prevent anyone from messing with it. As far as the filler neck and cap, I'm using the boat filler gas cap that has a spring loaded "handle". It's tight, but very easy to take off and on. I don't think they make a gas cap like you are talking about that will fit down in the hole (there's only a little over 2" to work with). I added a picture of the cap I'm using.

[msgross]

very cool...

[msgross]

did you take the flange off that filler?

[Hart_Rod]

Originally Posted by msgross

did you take the flange off that filler?

I had it machined down so that it would fit. It would be nice to fine one without the flange, but I haven't had any luck so far.

[chevelle]

This truck is my new inspiration You probably said it earlier but what size are those rear rallies? They look awesome

[Hart_Rod]

Originally Posted by chevelle

This truck is my new inspiration You probably said it earlier but what size are those rear rallies? They look awesome

Thanks! The ralleys are 15 x 8, tires 275 60's.

[Hart_Rod]

I finally got the blow off valve installed. It sound like a hurricane under the hood at a moderate throttle. I also started the 72 cable pedal install. Should have it finished up in the next day or so. Here's a few pictures of the progress...

[my67chevytruck]

nice progress.

[oldblue1968chevy]

looks good dont match but looks good!

are they a lil crooked? i need to do this swap how longs it take 1-2hr