Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by tomlamb

Tony,

I am looking for the passenger side E-brake intermediate cable support rod, would you have such a beast?

Thanks,

Tom

Tom:

I have what you need, but I am out of town until June 5th. Can you wait this long?

[tomlamb]

Originally Posted by LILRED66

Tom:

I have what you need, but I am out of town until June 5th. Can you wait this long?

Not a problem, let me know when you get back and settled...

[283 Man]

Tony, Ill be sending you a $150.00 dollar money order on the 1963 c10 shortbed on 6/2 /08 or 6/3/08 thanks thought let you know. thanks Morton

[LILRED66]

Originally Posted by tomlamb

Not a problem, let me know when you get back and settled...

tomlamb:

Sorry for my delay. Let me know if you need something and I will reply accordingly. Thanks and sorry for the delay.

[jonathan-m]

Ya, sure do. Take your time Tony, I'm in no rush at all.

[joe231]

hey Tony, I'm interested in a complete a/c set up also (with the factory dash, if possible), no hurry, when ever you get a chance I would like pics, list of parts, and price. Thanks
also would like prices on the short fleet bed sides also, thanks, Joe

[kdrodworks316]

Hey Tony, I know you are not the burban man, but its worth a try. I need the upper latch and control rod for the drivers side rear barn door. you got anything? thanks

[wild one]

Thanks Tony, keep me posted.

[Bob'sK10CHEVY]

Thanks Tony,
I will be on the look out for the motor perches. I appreciate you taking time to find me a set. I will be sending you a check for the rear bumper mounts and the factory air unit you quoted me in the next few days. Thanks Again!

[283 Man]

Tony sending you a payment of $30.00 dollar money order in the mail on my 1963 c-10 shortfleetside truck Im buying off you.. thanks Morton

[LILRED66]

Originally Posted by Bob'sK10CHEVY

Thanks Tony,
I will be on the look out for the motor perches. I appreciate you taking time to find me a set. I will be sending you a check for the rear bumper mounts and the factory air unit you quoted me in the next few days. Thanks Again!

Bob:

I received your payment for the rear bumper bracket mounts, but I don't recall what factory air unit you needed. Please let me know and I will react accordingly.

[wild one]

Originally Posted by wild one

Tony,

Hello, I'm looking for a factory A/C setup for a 64-66, specifically the vents, controls, and evaporator/heater box-case (all of the inside the cab parts) . I have a 66 C10 panel truck with the two speed fan and firewall mounted heater box and would like to upgrade/add A/C to my truck. I plan on modifying the system to use R134a and use a one off compressor - most likely a sanden unit and will be purchasing new condensor and evaporator coils as well as fabricating the refrigerant lines and brackets for this application. Any help is appreciated.

Thanks in advance,
Pete

Originally Posted by LILRED66

Pete:

Sorry for my delay in responding, but I have been out of town visiting family and working for my brother in Medford, OR for the past few weeks. I will be returning to my shop on June 5th, so I can jump on this. I have a few complete factory AC systems, but I will have to double-check, to ensure it is complete and the overall condition. I will follow-up with you soon and thanks for your interest.

Tony,

Any luck with the A/C components?

Pete

[LILRED66]

Originally Posted by wild one

Tony,

Any luck with the A/C components?

Pete

Pete:

Sorry for my delay. There has been a run on factory A/C set-ups of late...I will need to see what I have left in inventory. Are you still looking for a complete factory A/C set-up? Please let me know your thoughts.

[wild one]

Originally Posted by LILRED66

Pete:

Sorry for my delay. There has been a run on factory A/C set-ups of late...I will need to see what I have left in inventory. Are you still looking for a complete factory A/C set-up? Please let me know your thoughts.

Tony,

I'm looking for a factory A/C setup for a 64-66, specifically the vents, controls, cables, and evaporator/heater box-case (all of the inside the cab parts plus the blower assembly if it is different than my factory set up) . I have a 66 C10 panel truck with the two speed fan and the engine compartment firewall mounted heater box and would like to upgrade/add A/C to my truck. I plan on modifying the system to use R134a and use a one off compressor - most likely a sanden unit and will be purchasing new condensor and evaporator coils as well as fabricating the refrigerant lines and brackets for this application.

Thanks,

Pete

[Slammed67]

Do you have any 15x7 6-lug steel wheels (that accept dog dish style caps)? A buddy of mine is looking for two of them.

Thanks,
Jason

[LILRED66]

Originally Posted by Slammed67

Do you have any 15x7 6-lug steel wheels (that accept dog dish style caps)? A buddy of mine is looking for two of them.

Thanks,
Jason

Jason:

Thanks for the inquiry, but all of my factory six lug wheels are 5" or 5-1/2" wide...no 7" or wider. Sorry I couldn't help, but please let me know if you need other 4-5-6 Chevy truck parts in the future.

[rizick]

I am looking for a 3 speed on the tree - all linkage, and a transmission for my 65 stepside. it had a 3 spd in it but someone took it out and put a 4 spd in it (crudely I might add). I want to put back the 3 spd. I might need the steering column as well, mine is not in very good shape. I bought a set of 6 lug rims from you last month and they worked out great. Thank you

Email me @ rizick3511@aol.com

[LILRED66]

Originally Posted by rizick

I am looking for a 3 speed on the tree - all linkage, and a transmission for my 65 stepside. it had a 3 spd in it but someone took it out and put a 4 spd in it (crudely I might add). I want to put back the 3 spd. I might need the steering column as well, mine is not in very good shape. I bought a set of 6 lug rims from you last month and they worked out great. Thank you

Email me @ rizick3511@aol.com

rizick:

Sorry for the delay in responding. I have a complete factory Muncie three speed, including linkage, however I don't have the factory three speed steering column. Are you still looking for these parts?

I'm glad to hear the factory six lug rims worked for you. Let me know if I can help you with these parts or other 4-5-6 Chevy truck parts in the future.

PS-Thanks for your business.

[jonzcustomshop]

I am looking for a cigarette lighter for a 65 that is just plain black.
did they make them like that?
the only one I have seen so far has the chrome ring on it.
thanks, jon

[283 Man]

Tony a guy on classic parts forum was looking for a steering wheel with fancy horn ring,I referred him to you hes all the way from Belgium.he said hell try contact you gave him your email address you got on here.Thanks Morton

[283 Man]

Tony do you carry v-8 motor mounts for 305 chevy its for my Son Matthews 66 and a transmission mount for 350 turbo? just curious price to if you can let me know. thanks Morton

[LILRED66]

Originally Posted by 283 Man

Tony do you carry v-8 motor mounts for 305 chevy its for my Son Matthews 66 and a transmission mount for 350 turbo? just curious price to if you can let me know. thanks Morton

Morton:

Maybe you can a look at what I have when you are at my shop to pick up the '63. We can see if the parts will work and talk price.

[LILRED66]

Originally Posted by jonzcustomshop

I am looking for a cigarette lighter for a 65 that is just plain black.
did they make them like that?
the only one I have seen so far has the chrome ring on it.
thanks, jon

Jon:

There is such a beast...are you still looking?

[GMC65Guy]

How much for '65 6 lug factory wheels? a set of 4 (same color) or just one..

shipping to 74075

[LILRED66]

Originally Posted by GMC65Guy

How much for '65 6 lug factory wheels? a set of 4 (same color) or just one..

shipping to 74075

GMC65Guy:

I have a complete set of four matching factory six lug wheels from a '64 Chevy C10. Do you still need a complete matching factory set? Please let me know your thoughts and I will reply accordingly.