Project "Redemption" 68 SWB Fleetside - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bennett68C10 · 04-30-2016, 09:30 PM

Quote:

Originally Posted by 69short

The reviews say it brushes on really nice. I think i may order a pint.

I used the spray cans, turned out pretty good!

**RRR18** · 04-30-2016, 10:11 PM

I brushed the KBS on my small block. Was a ***** but it came out good. To me it need couple coats and to do multiple coats you either do em right after one another or wait, scuff, clean, and recoat. Good s@#t though.

Bennett68C10 · 05-07-2016, 08:24 PM

Was like Christmas morning at my house yesterday

my porterbuilt parts showed up along with my rear end parts and my holley fuel rails.

Bennett68C10 · 05-07-2016, 08:27 PM

Got the inner frame stiffener installed today.

jeh · 05-07-2016, 08:34 PM

Quote:

Originally Posted by Bennett68C10

Was like Christmas morning at my house yesterday

my porterbuilt parts showed up along with my rear end parts and my holley fuel rails.

Dang Kieth, it looks like you cleaned out then whole back of the UPS truck!!! You're going to be a busy man now.

69short · 05-07-2016, 08:46 PM

Sweet! That's heaven right there

**Sac** · 05-08-2016, 03:23 AM

Delivery guy earned his keep yesterday!!

boostedc10 · 05-09-2016, 08:02 AM

Quote:

Originally Posted by Sac

Delivery guy earned his keep yesterday!!

Probably needs to see a chiropractor after that delivery!

Bennett68C10 · 05-09-2016, 08:16 AM

Quote:

Originally Posted by jeh

Dang Kieth, it looks like you cleaned out then whole back of the UPS truck!!! You're going to be a busy man now.

Quote:

Originally Posted by 69short

Sweet! That's heaven right there

Quote:

Originally Posted by Sac

Delivery guy earned his keep yesterday!!

Quote:

Originally Posted by boostedc10

Probably needs to see a chiropractor after that delivery!

Thanks guys, this should keep me busy for a while. The UPS guy looked at me like I was crazy with all those packages

original-71 · 05-09-2016, 11:43 AM

Quote:

Originally Posted by Bennett68C10

Thanks guys, this should keep me busy for a while. The UPS guy looked at me like I was crazy with all those packages

UPS guy must not be a truck guy to understand

looking good brother

Bennett68C10 · 05-09-2016, 03:31 PM

Quote:

Originally Posted by mcbassin

Awesome score! all at one time too. Merry Christmas!

thanks Mike

Quote:

Originally Posted by original-71

UPS guy must not be a truck guy to understand

looking good brother

Thanks Hector, he probably wanted to complain to me about his back pain from carrying all those boxes

mcbassin · 05-09-2016, 11:29 AM

Awesome score! all at one time too. Merry Christmas!

RNmatt87 · 05-09-2016, 07:37 PM

Looking great! Always a good feeling seeing the UPS guy roll up and stop in front of the house. I've been trolling around looking for updates on this.

Bennett68C10 · 05-10-2016, 10:54 AM

Quote:

Originally Posted by RNmatt87

Looking great! Always a good feeling seeing the UPS guy roll up and stop in front of the house. I've been trolling around looking for updates on this.

Thanks, yeah I was excited to see him. I've been waiting on these parts for a while

I'll have some updates to the thread over the next couple of weeks as I get the rear dropmember installed.

swamp rat · 05-10-2016, 08:49 PM

Looks like your pretty set now! Ya know i left my a note on my door with instructions on where to leave a package one day and i left him a tip with a thank you note at the drop off point, it was a pretty heavy package, the driver never took the tip.. Well, I tried anyway.

knomadd · 05-11-2016, 09:25 AM

Nice collection of parts you've got, again! This should be fun to watch you put it all together.... almost as fun as actually doing it!

Bennett68C10 · 05-12-2016, 10:35 AM

Quote:

Originally Posted by swamp rat

Looks like your pretty set now! Ya know i left my a note on my door with instructions on where to leave a package one day and i left him a tip with a thank you note at the drop off point, it was a pretty heavy package, the driver never took the tip.. Well, I tried anyway.

At least you tried, and I'm sure he/she remember that when dropping off packages to your house.

Quote:

Originally Posted by knomadd

Nice collection of parts you've got, again! This should be fun to watch you put it all together.... almost as fun as actually doing it!

Thanks, hopefully I can keep these collection of parts this time

Bennett68C10 · 05-16-2016, 01:52 PM

Didn't have a lot of time this weekend to work on the truck but I did manage to get the notches in place! Still need to cut the frame and get the notch caps on!

Bennett68C10 · 05-16-2016, 01:53 PM

...

jeh · 05-16-2016, 01:56 PM

A little progress is better than none at all!!! Looks good

mcbassin · 05-16-2016, 03:19 PM

Quote:

Originally Posted by Bennett68C10

Didn't have a lot of time this weekend to work on the truck but I did manage to get the notches in place! Still need to cut the frame and get the notch caps on
...

Very nice!!!

trkfrk · 05-18-2016, 12:32 AM

Nice progress! You will have a roller before you know it.

Bennett68C10 · 05-18-2016, 08:20 AM

Quote:

Originally Posted by jeh

A little progress is better than none at all!!! Looks good

I know, I always think I'm going to get more done than I really do and it gets me frustrated.

Quote:

Originally Posted by MMcMasters

Heck yeah, that looks like a great start to me!! PB has some sexy parts!

Mike

Yes they do, the craftsmanship and build quality is second to none. I saw that you are selling your RideTech frame, I'm guessing Porterbuilt might be in your future

Quote:

Originally Posted by mcbassin

Very nice!!!

Thanks Mike, its nice to have parts that go together so easily

Quote:

Originally Posted by trkfrk

Nice progress! You will have a roller before you know it.

I'm hoping to have the Rear Dropmember finished this weekend. Still need to get my rear rebuilt before I put it back under and have a rolling chassis but it's slowly getting there.

MMcMasters · 05-18-2016, 08:42 AM

Quote:

Originally Posted by Bennett68C10

Yes they do, the craftsmanship and build quality is second to none. I saw that you are selling your RideTech frame, I'm guessing Porterbuilt might be in your future

Yes it is, I can't wait!

JG67 · 05-22-2016, 11:53 AM

Really cool progress man...

04-30-2016, 10:11 PM	#2
RRR18 Senior Member Join Date: Nov 2010 Location: Lordstown, OH / Wentzville, MO Posts: 870	Re: Project "Redemption" 68 SWB Fleetside I brushed the KBS on my small block. Was a ***** but it came out good. To me it need couple coats and to do multiple coats you either do em right after one another or wait, scuff, clean, and recoat. Good s@#t though. __________________ '67 BAD IDEA Follow on Instagram https://www.instagram.com/rtimes3c10/ Ryan

05-07-2016, 08:24 PM	#3
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Redemption" 68 SWB Fleetside Was like Christmas morning at my house yesterday my porterbuilt parts showed up along with my rear end parts and my holley fuel rails. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-07-2016, 08:27 PM	#4
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Redemption" 68 SWB Fleetside Got the inner frame stiffener installed today. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-07-2016, 08:46 PM	#6
69short Registered User Join Date: May 2012 Location: DeKalb, MO Posts: 508	Re: Project "Redemption" 68 SWB Fleetside Sweet! That's heaven right there __________________ -Justin '69 SWB \| Zoie Jane \| Porterbuilt, LQ9, 20"/22" wheels

05-08-2016, 03:23 AM	#7
Sac Senior Member Join Date: Nov 2013 Location: Franklinton, LA Posts: 256	Re: Project "Redemption" 68 SWB Fleetside Delivery guy earned his keep yesterday!! __________________ Green Survivor Father/Son Truck <SeveredTies>

05-09-2016, 11:29 AM	#12
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "Redemption" 68 SWB Fleetside Awesome score! all at one time too. Merry Christmas! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-09-2016, 07:37 PM	#13
RNmatt87 Registered User Join Date: Jul 2015 Location: Warner Robins, Ga Posts: 32	Re: Project "Redemption" 68 SWB Fleetside Looking great! Always a good feeling seeing the UPS guy roll up and stop in front of the house. I've been trolling around looking for updates on this.

05-10-2016, 08:49 PM	#15
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project "Redemption" 68 SWB Fleetside Looks like your pretty set now! Ya know i left my a note on my door with instructions on where to leave a package one day and i left him a tip with a thank you note at the drop off point, it was a pretty heavy package, the driver never took the tip.. Well, I tried anyway. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

05-11-2016, 09:25 AM	#16
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Project "Redemption" 68 SWB Fleetside Nice collection of parts you've got, again! This should be fun to watch you put it all together.... almost as fun as actually doing it! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

05-16-2016, 01:52 PM	#18
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Redemption" 68 SWB Fleetside Didn't have a lot of time this weekend to work on the truck but I did manage to get the notches in place! Still need to cut the frame and get the notch caps on! Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-16-2016, 01:53 PM	#19
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Redemption" 68 SWB Fleetside ... Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-16-2016, 01:56 PM	#20
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Project "Redemption" 68 SWB Fleetside A little progress is better than none at all!!! Looks good __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

05-18-2016, 12:32 AM	#22
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Project "Redemption" 68 SWB Fleetside Nice progress! You will have a roller before you know it. __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

05-22-2016, 11:53 AM	#25
JG67 Registered User Join Date: Dec 2013 Location: Phoenix Posts: 87	Re: Project "Redemption" 68 SWB Fleetside Really cool progress man...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.