![]() |
|
![]() |
#1 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
So I've started working on the roof rack design. I started with a 1 1/2 inch angle iron (bed frame railing), but it wasn't tall enough. I have to consider the height to mount the wiper motor above the windshield.
I found a 6' section of 4 inch tall i-beam at work. The end was mangled, but i only needed 4 feet. I cut the i-beam into 6 inch sections to support the factory roof rack. In order to get the aluminium rack to the edge of the i-beam, i put each one in the bench vise and beat them down one inch. My original plan was to cut off the inside top section of the beam, but then i thought i could drill a hole or two into the inner flange and use it to secure cargo straps, if i ever use the rack. - Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
The factory nut inserts have seen better days, so i picked up some new inserts from summit racing. I forgot that i had repaired the roof around a few of the inserts and i ended up doing more damage than good. Fortunately, the holes are easily accessible, just above the rear passenger seat, so I'll use bolts and large fender washers to secure the roof rack there.
-Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
More design changes to the roof rack. The factory aluminum bars were starting to be more trouble than they're worth. So I went with one inch square tubing. There's a slight radius to the roof from front to back, so I've got to shorten the center 2 support beams about 1/2 inch. But it's starting to come together.
-Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R Last edited by gottattooz; 08-29-2020 at 08:06 PM. |
![]() |
![]() |
![]() |
#4 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Jeep Trailblazer SS
That roof rack is turning out pretty cool!
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#5 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,130
|
Re: Jeep Trailblazer SS
More great looking progress
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
I finished welding up the roof rack, except the front cross bar. That'll be determined when i figure out the wiper motor configuration.
I ordered 2 rolls of 1/4 pinstripe tape. One silver, one chrome. I striped the left side (passenger side in the pictures) in chrome and the right side in silver. I even taped the third grille bar to see what it looks like. I didn't like the third bar. -Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
I got up early and hit the junkyard Looking for opposed wiper arms to try something different when I came across a 1993 Mercedes 400e with a mono wiper setup. $46.00 later, here we are. It's got a cam on the arm that pushes out to reach the corners of the windshield. I bench tested it and it works great. Now to get it mounted and wired up.
-Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R Last edited by gottattooz; 09-10-2020 at 03:02 PM. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
I made done brackets to mount the wiper regulator to the front cross brace of the roof rack. Found out i can only fit a 13 inch wiper blade, but it works. In super stoked about it. Now to make it permanent.
- Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
While I'm waiting for more metal for the wiper regulator, I decided to figure out my third brake light design. I originality wanted to make a spoiler to deflect air down to keep the back window clean. I couldn't come up with a design that didn't look ridiculous,so i figured less is more. Keep it simple.
I notched a section of 1 1/2 inch angle (bed frame railing) to fit under the last roof rack cross brace. I drilled 10 holes to mount red eagle eye LED lights, each with 3 chips, so they're really bright. I entertained the idea of putting amber LEDs on the ends to make the turn signals more visible, but I think it'll be too much. -Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#10 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,130
|
Re: Jeep Trailblazer SS
It's coming together and looking good.
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
Well i finished the roof rack and the air shield to cover the wiper regulator. Now i have to remove it to weld the bottoms off the crossbars and paint it with epoxy paint. Now i can start the bodywork for the roof.
-Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
I removed the roof rack to finish welding the underside and the corners i couldn't reach. I sanded it and painted it with epoxy gloss black paint.
I used lens tint to camouflage the third brake light LEDs. They're really really bright, so I'm also helping people behind me not go blind when i hit the brakes. -Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#13 |
Who Me?
Join Date: Sep 2010
Location: Royal Palm Beach, FL
Posts: 4,067
|
Re: Jeep Trailblazer SS
A+ on fab and creativity for the wiper and 3rd brake light... Oh yea, the roof rack is sweet too!
__________________
![]() 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold) |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
Sanding, sanding and even more sanding. I finally got the bodywork on the roof finished. I was hoping to primer everything over the weekend, but the rain and humidity prevented that. So i got up early today and taped everything off, masked and primered the hood and the roof. I would like to paint the roof so i can install the roof rack permanently.
-Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#15 | |
Registered User
![]() Join Date: Nov 2018
Location: Locust grove, Ga
Posts: 2,234
|
Re: Jeep Trailblazer SS
Quote:
__________________
70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com |
|
![]() |
![]() |
![]() |
#16 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,130
|
Re: Jeep Trailblazer SS
I can't wait to see it all one color! You're making some great progress.
![]()
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
No real progress, but i did drive 700 miles roundtrip to pick up wide track fenders and fender flares from a j10 pickup. I got excited to put them on, and was immediately discouraged by how much work it's going to be to install the rear flares. Also, the front fenders are worse than what I've got. Hopefully i can transfer the flares onto the white fenders from my parts Jeep.
-Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#18 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,130
|
Re: Jeep Trailblazer SS
Going 350 miles for parts. It sucks that they're not as good as what you thought.
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#19 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Jeep Trailblazer SS
Those vehicles have jumped so much in value, it's hard to find someone parting one out, or cutting it up, even if it is a little rusty.
Those are going to look soooooooooo cool. I'm shocked they're a single piece. It seems that would make for a difficult stamping, especially on the J10 bed sides. I had always thought they were bolted on. My dad even owned a couple J10s way back in the late 80's.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#20 | |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
Quote:
Even with all the extra work I'll have to do, it was still a great deal. Repop fiberglass front fenders are $370/each from Canada, plus shipping. They make rear fiberglass flares for $270/pair plus shipping. That's almost $1000, and they still need to be prepped and body worked. I'm mostly excited because the flares will solve my front tire clearance issues. I also forgot to mention that i ordered a jig that i can change the bolt pattern from 6x5 to 6x5.5. It'll open up the aftermarket wheel options. I want to go to 17 inch wheels and find an old school looking wheel that will compliment the period correctness I'm shooting for. -Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
|
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Sep 2013
Location: Newton,N.C.
Posts: 317
|
Re: Jeep Trailblazer SS
Love the build. It is different. AWD will go like stink.
Get a Jeep G/C 5.7 Hemi engine cover just to screw with people when the hood is open. |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
I got off work early, so i started in on the fender flares. I just cut the flares off the quarter panels at the crease. I still don't know exactly how they're gonna be mounted, but i did repurpose the scraps from the quarter panel to patch the dog leg of the front fender.
-Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Apr 2008
Location: Hampton, Ga
Posts: 897
|
Re: Jeep Trailblazer SS
There's a patch of pinholes above the fender flare, indicated by the green tape showing through from the outside. I mixed up and filled in the back of the fender with all-metal. Same thing i did to the underside of the hood.
-Josh
__________________
1967 Buick Special wagon 1968 Jeep Wagoneer 1958 Chevy Panel Truck 2017 Suzuki M109R |
![]() |
![]() |
![]() |
#24 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,130
|
Re: Jeep Trailblazer SS
It's gonna look great!
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#25 |
Registered User
![]() Join Date: Nov 2018
Location: Locust grove, Ga
Posts: 2,234
|
Re: Jeep Trailblazer SS
And then after a food break this was accomplished, LS related so it still counts
__________________
70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com |
![]() |
![]() |
![]() |
Bookmarks |
|
|