|
10-15-2016, 01:53 PM | #1 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Kimble,
No problem, will post photos of mine. Agree, they are likely the same. Les |
11-15-2016, 09:54 PM | #2 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Kimble,
Will get your reply found soon, I hope, have not forgot. Les |
11-15-2016, 10:03 PM | #3 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Kevin,
The photos of the steering gear box, pitman arm, steering arm attached to Dana 44, and steering linkage- between pitman arm and steering arm. The third photo shows the collapsable steering column for safety, along with universal joints that help with the offset of newer steering gear box. The adapter plate is from CaptainFab. Last edited by aotte1; 11-15-2016 at 10:21 PM. |
11-15-2016, 10:08 PM | #4 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
A few more. The last two photos show the steering linkage angle being close to that of the front spring.
Last edited by aotte1; 11-15-2016 at 10:24 PM. |
11-23-2016, 10:03 PM | #5 |
Registered User
Join Date: Oct 2014
Location: somewhere . . .
Posts: 968
|
Re: 64' K10 Project Long Bed
nice build ... keep up the good work
__________________
dont want to hear excuses, i want to hear solution(s) |
12-09-2016, 11:14 PM | #6 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Post for Kevin on how, the collapsable steering column from Borgason is connected to original steering shaft. Photo shows how it is shaped into a "D", for connecting to universal joint. Their is more on this around post #138.
|
01-06-2017, 10:18 PM | #7 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Photos of power brake booster, will post more from computer.
Les |
01-06-2017, 10:39 PM | #8 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Where rod connects to booster.
|
01-26-2017, 12:18 AM | #9 |
Registered User
Join Date: Mar 2009
Location: Colorado Springs, Colorado
Posts: 7
|
Re: 64' K10 Project Long Bed
What is the booster out of?
|
01-28-2017, 04:14 PM | #10 |
Registered User
Join Date: Apr 2012
Location: Wisconsin
Posts: 3,329
|
Re: 64' K10 Project Long Bed
__________________
IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK |
01-29-2017, 09:08 AM | #11 |
Active Member
Join Date: Jul 2013
Location: Southeast MI
Posts: 192
|
Re: 64' K10 Project Long Bed
|
02-11-2018, 02:21 AM | #12 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Jon,
A little late thanking you your post on the fan clutches. Not much progress, last year. The body panels are at the painter, forever, still waiting. Mainly painting is what waiting on to finish. Would be great to paint myself, however, no more painting for me, health reasons. Past year, found a pair of 17.5 6 lug wheel, working on getting 2 more, also a little body work, metal bumping on the cab. Finalized the original brake lines layout, with the help of Lyle. This truck had the brake lines highly modified, along with hydraulic brake lock added. Engine almost rebuilt, trans is rebuilt. Researched and have made decision on steering arm geometry, for steering arm. Also, added a four post lift to garage, should have done years ago. Started another project while waiting for truck to be painted. Short bed C10 truck. Building pretty much stock, with a few upgrades. Will be a driver. Les Last edited by aotte1; 02-11-2018 at 02:29 AM. |
02-11-2018, 09:33 AM | #13 |
Active Member
Join Date: Jul 2013
Location: Southeast MI
Posts: 192
|
Re: 64' K10 Project Long Bed
Hi Les, good to hear you are making some progress. Which 4-post did you acquire?
Mike |
02-13-2018, 12:29 AM | #14 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Mike,
The four post is made by "Direct Lift" which is a "Rotary" company. It is I think a 9000 # capacity, "Pro Pack 9 Plus". Will get the specification on it. Very sturdy, like it a lot, would buy again. One of the features for choosing it, is the space between the runways, wider then most, more room to do stuff. It is made in China at a factory owned by Rotory, factory also make Rotory components too. Key for me was that factory is owned and operated by Rotory, vs certain other brands that send out a request for bids to build a certain number of lifts. Once they sell through these, they do another request for the lowest price to build another set of lifts. Some of them are not certified to industry standards. Delivered by truck, must have decent size fork lift. The package is heavy and long. Main issue is its length, and may not be able to center on fork lift ( big rotation force) unloading from tractor trailer. Then loaded on roll back and delivered to garage. Roll back dropped it off in garage stall. Unloaded onto three 1000# dollies. Used engine hoist with strap slings to unpack package. The slings had a large distance between the two end on the parts, e.g. runways, to keep part being lifted under controlled. The columns can be moved by two people. Planned placement of parts, because only had access to one side of lift. Also has sliding hydraulic lift, it allows the vehicle to be lifted off runways, to work on suspension, brake stuff. Purchased with a discount negotiated at time of purchase. Les Last edited by aotte1; 02-13-2018 at 01:13 AM. |
02-13-2018, 07:12 AM | #15 |
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: 64' K10 Project Long Bed
Nice lift, I always wanted one like that. I went with a Kwik Lift when I had a normal garage like that due to limited height to lift. And when I moved Kwik Lift bought it back.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
02-14-2018, 01:26 AM | #16 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Rocknrod,
Thanks for the lift complement. Do you have space for a lift now? You had to be good ( too cool for school) to be a Master Chief, congratulation on your Navy career. Lucky this garage is 11' tall, so lift works ok. Moved the garage door above the lift and installed a high lift garage door track, about 4" off ceiling, with a side opener. Not shown in photos above. Les Last edited by aotte1; 02-14-2018 at 01:35 AM. |
02-14-2018, 03:21 PM | #17 |
Registered User
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 3,039
|
Re: 64' K10 Project Long Bed
Nice lift Les. My buddy had one in his shop and a customer bought one for his garage. Well i got to install it. You are right, Heavy. It was dropped in front of his house. Long story short, my buddy and i had to move it 50 feet to his garage. not fun. Enjoy your lift.
Kimble
__________________
1961 chevy K10 my build is------------61K10 build |
02-15-2018, 08:16 PM | #18 |
Active Member
Join Date: Jul 2013
Location: Southeast MI
Posts: 192
|
Re: 64' K10 Project Long Bed
Thanks for the information Les, looks like an option for me. Always looking for stuff for the time when I FINALLY get time to work on my truck.
Mike |
02-16-2018, 02:15 AM | #19 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Kimble,
Thanks for the complement on the lift. Two people moving one 50 ft. is a lot of work. mg, You are welcome, for the information. From my experience, you will enjoy it a lot. Makes so many projects a lot easier. Thank, Les |
06-10-2019, 12:38 AM | #20 |
Registered User
Join Date: Jan 2012
Location: Preston Idaho
Posts: 279
|
Re: 64' K10 Project Long Bed
Any updates?
|
10-11-2019, 11:57 PM | #21 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Ray,
Thanks for the request. Not much new to report on the 64’. Do have the 64’ cab on the frame. Will post new photos. My grandson and I are planning to get back on it soon. We have been working on our 66’ C20 Custom Camper, this past few months. Lots of body work on the cab/fenders. Putting 66 cab on frame now for final cab and fenders alignment, to finish body work. Included photo of 66’ cab and finders color cut in. Les Last edited by aotte1; 10-12-2019 at 12:09 AM. |
08-04-2020, 02:18 PM | #22 |
Registered User
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 3,039
|
Re: 64' K10 Project Long Bed
Looking good Les, and its good you have a helper most kids won't get off there phones. Haven't did much to my tk still need to change the trans. Hot weather and old age don't get along lol! I think my pto is part of my trans noise, thought of removing the winch but i would need some frame horns as they were cut off for the big bumper.
take care Les----------kimble
__________________
1961 chevy K10 my build is------------61K10 build |
09-11-2020, 11:16 PM | #23 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Billy,
Yes glad to help, may be a few day, Truck is in storage . Will need to visit it. Let me know any specific dimensions need and will get them. Photos below, 66’ GMC K10s Suburban. Les Last edited by aotte1; 09-12-2020 at 12:07 AM. |
09-11-2020, 11:37 PM | #24 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
More photos:
Let me know if you need more photos. These are V8 3 row radiator. Also should be able to get V8 4 row radiator Cross member if needed, will need to dig for it. Note: some of the measurement waste an inch for accuracy. Les |
09-11-2020, 11:45 PM | #25 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,649
|
Re: 64' K10 Project Long Bed
Hi Kimble,
Good to hear from you, have same issue, still hot and humid here. Waiting for cooler weather to start on 66’ GMC floor rust. Hopefully in a few weeks. Making some progress of frame/suspension. Working on axles and TC inside in AC too. You remember this process too, on front/rear spring shackles, bushings and pins. Removing, cleaning, replacing worn out parts. All that done now installing, one rear done. Thanks for all your help in past, along with your very helpful build ( 61K10 build ). Les Last edited by aotte1; 09-12-2020 at 12:18 AM. |
Bookmarks |
|
|