Hazel the older Sister.... - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

n2billet · 10-28-2009, 04:37 PM

Quote:

Originally Posted by my67chevytruck

WTF...... Hope the claim process doesn't drag out tooooo long!!

Just got off the phone with them..........min. 30 days! They wouldn't let me wait 30 days to pay them!

SCOTI · 10-28-2009, 05:08 PM

Quote:

Originally Posted by n2billet

Just got off the phone with them..........min. 30 days! They wouldn't let me wait 30 days to pay them!

Sounds like 'scot-luck' . . ....

**kev2809** · 10-28-2009, 10:46 PM

Quote:

Originally Posted by n2billet

They wouldn't let me wait 30 days to pay them!

lol.
well that sucks man, i would be on their ass every 3 days checking in on it.

**Hart_Rod** · 10-28-2009, 11:41 PM

Quote:

Originally Posted by n2billet

Well sorta..... The motor came in but it was damaged during shipping (they dropped it from the truck) now I'm dealing with UPS freight to get my money back so I can order another one so technically yes, I do have all my parts.

Did your's look something like this? This was the first engine for my 69 Burb. I had it delivered to my buddy's shop and it arrived when I was out of town. It was all wrapped in black plastic and you really couldn't tell what was wrong until he had the driver take it everything off. Some how or another they had broken a couple of bands during the shipping process. Luckily my buddy called me and I told him not to accept it and told them to send it back to the shipper. The company I bought it from sent me another one but I'm not sure what would have happened had we accepted it and then unwrapped it after the driver left....

...

EDIT: OBTW, this motor and tranny only had 20 miles on them.....

.

n2billet · 10-29-2009, 06:03 AM

Quote:

Originally Posted by kev2809

lol.
well that sucks man, i would be on their ass every 3 days checking in on it.

I was thinking more like everyday.......I have his direct number now so where going to get to be good buddies!

Quote:

Originally Posted by Hart_Rod

Did your's look something like this? This was the first engine for my 69 Burb. I had it delivered to my buddy's shop and it arrived when I was out of town. It was all wrapped in black plastic and you really couldn't tell what was wrong until he had the driver take it everything off. Some how or another they had broken a couple of bands during the shipping process. Luckily my buddy called me and I told him not to accept it and told them to send it back to the shipper. The company I bought it from sent me another one but I'm not sure what would have happened had we accepted it and then unwrapped it after the driver left....

...

EDIT: OBTW, this motor and tranny only had 20 miles on them.....

.

Mine came still in the crate but the wood was a little messed up on one end but nothing that would make you think the motor was damaged. After looking closer at it they move the protective paper under the plastic to cover the damage and they did a little crate repair. It basically landed on the drivers side valve cover; you can see every rocker arm in great detail.

I was told to leave it as is by the investigator that came to the house and took the pictures but I really would like to see what’s under that pancaked valve cover.

Ricks' 72C10 · 10-29-2009, 12:36 PM

Quote:

Originally Posted by n2billet

I was thinking more like everyday.......I have his direct number now so where going to get to be good buddies!

Mine came still in the crate but the wood was a little messed up on one end but nothing that would make you think the motor was damaged. After looking closer at it they move the protective paper under the plastic to cover the damage and they did a little crate repair. It basically landed on the drivers side valve cover; you can see every rocker arm in great detail.

I was told to leave it as is by the investigator that came to the house and took the pictures but I really would like to see what’s under that pancaked valve cover.

Excellent work on your projects, love "Break point" and "Hazel"

Where are you guys finding these low mileage LS eng & trans packages to order? Bummer deal about the shipping problems, good luck on that.

**Hart_Rod** · 10-29-2009, 01:14 PM

Quote:

Originally Posted by Ricks' 72C10

Where are you guys finding these low mileage LS eng & trans packages to order?

I got mine from Schramm's Auto Salvage out of Ohio...

ChuckDriver · 10-29-2009, 01:28 PM

Definetly one to watch!

n2billet · 11-01-2009, 07:20 PM

Well since I don't have a motor to assemble and paint I finished lowering the seat brackets and made a mount for my air management. I made it to mount under the seat so it will be easy to reach.

**lolife99** · 11-01-2009, 08:46 PM

Cool looking controller mount!

djw32 · 11-02-2009, 01:33 AM

That mount looks sweet!

CheyenneShop · 11-02-2009, 01:44 AM

Bad A$$ bro

98L150 · 11-02-2009, 11:17 AM

very nice keith

**kev2809** · 11-02-2009, 11:42 AM

thats nice man. so it stays under the seat or it bolts under the seat and comes out and in front?

**67cheby** · 11-02-2009, 11:58 AM

That is awesome , i am thinking about mounting mine in the storage compartment in the buddy buckets, i have the remote to use on my keychain , but if i had those kind of metal working skills i would probably whip up something like that ....

n2billet · 11-02-2009, 12:34 PM

Quote:

Originally Posted by kev2809

thats nice man. so it stays under the seat or it bolts under the seat and comes out and in front?

It bolts to the bottom of the seat, right in the middle (out front). I'll get a picture of it next weekend when I'm back at the shop.

my67chevytruck · 11-02-2009, 01:54 PM

looking good keith!

72BlckButy · 11-03-2009, 09:16 AM

Awesome work Keith, can't wait to see how this is going to mount.

powell72 · 11-20-2009, 03:40 PM

Hey Keith, just wanted to congratulate you on the feature on your Rambler in the Feb '10 issue of Rod & Custom, looking good. Now how about an update on the truck?

72BlckButy · 11-20-2009, 03:51 PM

Thanks Chris, there's another mag I need to look for at the store. Congrats on the feature Keith!

n2billet · 11-20-2009, 10:21 PM

Quote:

Originally Posted by powell72

Hey Keith, just wanted to congratulate you on the feature on your Rambler in the Feb '10 issue of Rod & Custom, looking good. Now how about an update on the truck?

Quote:

Originally Posted by 72BlckButy

Thanks Chris, there's another mag I need to look for at the store. Congrats on the feature Keith!

Thanks Guys........

I'll have some updates in a week or two.......nothing really worth showing right now.

n2billet · 11-21-2009, 08:08 PM

Got a little done today, I made a top mount for the Aluminum radiator that I'm going to use and I also brought out my motor so I can start mocking it up. I worked on another item but that's hush hush because it may look like crap and end up in the trash.

VA72C10 · 11-22-2009, 09:29 PM

Very nice rad mount. I am planning a custom one for mine and hadn't considered capping the actual entire top of the radiator, but that is a very nice and clean look.

PBFAB.COM · 11-23-2009, 10:23 PM

I had a dream about this truck laying on the ground. Too bad it's destined for a "mild" drop.

n2billet · 11-23-2009, 10:47 PM

Quote:

Originally Posted by porterbuilt

I had a dream about this truck laying on the ground. Too bad it's destined for a "mild" drop.

About 50 percent of it is laying on the ground, the work bench and all over the shop!

10-29-2009, 01:28 PM	#208
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Hazel the older Sister.... Definetly one to watch! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

11-01-2009, 07:20 PM	#209
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... Well since I don't have a motor to assemble and paint I finished lowering the seat brackets and made a mount for my air management. I made it to mount under the seat so it will be easy to reach. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 05-20-2010 at 04:39 PM.

11-01-2009, 08:46 PM	#210
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Hazel the older Sister.... Cool looking controller mount! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-02-2009, 01:33 AM	#211
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Hazel the older Sister.... That mount looks sweet!

11-02-2009, 01:44 AM	#212
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: Hazel the older Sister.... Bad A$$ bro __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

11-02-2009, 11:17 AM	#213
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Hazel the older Sister.... very nice keith __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

11-02-2009, 11:42 AM	#214
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Hazel the older Sister.... thats nice man. so it stays under the seat or it bolts under the seat and comes out and in front? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-02-2009, 11:58 AM	#215
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... That is awesome , i am thinking about mounting mine in the storage compartment in the buddy buckets, i have the remote to use on my keychain , but if i had those kind of metal working skills i would probably whip up something like that .... __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-02-2009, 01:54 PM	#217
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Hazel the older Sister.... looking good keith! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

11-03-2009, 09:16 AM	#218
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hazel the older Sister.... Awesome work Keith, can't wait to see how this is going to mount. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-20-2009, 03:40 PM	#219
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: Hazel the older Sister.... Hey Keith, just wanted to congratulate you on the feature on your Rambler in the Feb '10 issue of Rod & Custom, looking good. Now how about an update on the truck? __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

11-20-2009, 03:51 PM	#220
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hazel the older Sister.... Thanks Chris, there's another mag I need to look for at the store. Congrats on the feature Keith! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-21-2009, 08:08 PM	#222
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... Got a little done today, I made a top mount for the Aluminum radiator that I'm going to use and I also brought out my motor so I can start mocking it up. I worked on another item but that's hush hush because it may look like crap and end up in the trash. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 05-20-2010 at 04:40 PM.

11-22-2009, 09:29 PM	#223
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Hazel the older Sister.... Very nice rad mount. I am planning a custom one for mine and hadn't considered capping the actual entire top of the radiator, but that is a very nice and clean look. __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-23-2009, 10:23 PM	#224
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Hazel the older Sister.... I had a dream about this truck laying on the ground. Too bad it's destined for a "mild" drop. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.