CA Dash Pad- Covered With French Seam - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crsweet91 · 01-25-2013, 09:40 PM

Here it is finished up. Black vinyl, trunk liner carpet on the inside. Stainless cupholders. Message me if your interested.

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

crsweet91 · 01-28-2013, 01:09 PM

^^^The above console is looking for a home.

litew8 · 01-29-2013, 02:09 AM

like seeing yor finished products

great craftsmanship

**zicc1835** · 01-29-2013, 03:35 AM

real talent there, very nice ,ill be in touch when i get to that part of the build

nobolt · 01-29-2013, 06:54 AM

great work! when the time comes..............

northern 85 · 01-29-2013, 07:06 AM

WOW that looks beautifullllll!!!!!!!!!!!!!!!!!!!!!!!!!

crsweet91 · 01-29-2013, 10:59 PM

Visors look like this? These were already redone by someone once before.

Send them to me and Ill make them look like this. Might only be visors, but I take time to make sure theyre nice. I turn off my motor and handwheel my sewing machine for each visor to make sure the stitches are nice and straight.

Also wrapped some armrests. This is all black whisper vinyl.

SCOOBYDOOBYDOO · 01-30-2013, 01:19 AM

Man your work is awesome what would you charge to do visors wish I had the
money to do the d as h pad
Posted via Mobile Device

crsweet91 · 01-30-2013, 01:23 AM

Quote:

Originally Posted by SCOOBYDOOBYDOO

Man your work is awesome what would you charge to do visors wish I had the
money to do the d as h pad
Posted via Mobile Device

Visors are usually $150. That includes the vinyl, materials, and return shipping. Ill paint the arms also.

tabarcus · 01-30-2013, 09:51 AM

Nice work. So what is the secret to getting the material to conform and adhere to the contours of the arm rests?

crsweet91 · 01-30-2013, 11:53 AM

Quote:

Originally Posted by tabarcus

Nice work. So what is the secret to getting the material to conform and adhere to the contours of the arm rests?

Heat gun to get the material really soft and stretch, so all the wrinkles pull out. And the correct adhesive. I buy proffessional grade high heat adhesive by the gallon and spray it. If you tried doing any of this with a spray can it wouldnt work.
Posted via Mobile Device

ChevyCruizer · 01-30-2013, 12:51 PM

Care to share what adhesive you use?

I buy proffessional grade high heat adhesive by the gallon and spray it. If you tried doing any of this with a spray can it wouldnt work.

Thanks, John

crsweet91 · 01-30-2013, 12:58 PM

Quote:

Originally Posted by ChevyCruizer

Care to share what adhesive you use?

I buy proffessional grade high heat adhesive by the gallon and spray it. If you tried doing any of this with a spray can it wouldnt work.

Thanks, John

DAP Landau Top and Trim. Spray it out of one of these guns. http://www.harborfreight.com/heavy-d...gun-97855.html

BruthaMan · 01-30-2013, 04:29 PM

Connor, have you ever made bench seat covers out of the same material? Is that something you could do as well?

crsweet91 · 01-30-2013, 04:49 PM

Quote:

Originally Posted by BruthaMan

Connor, have you ever made bench seat covers out of the same material? Is that something you could do as well?

If I remember right I did some visors in symphony for you. If your covers are in good shape that I can make templates off then I can do it.

Im not planning on doing them to sell though.

I am looking for some buckets to do. If anyone has a set laying around thats willing to sell them to me for a good price let me know.

tabarcus · 01-31-2013, 10:59 PM

Conner,

What can you do with these door panels? You know the handles are Black Vinyl Whisper. Ivory/Parchment vinyl might be an offsetting color I might consider. Looking for creative ideas! What would be the estimated cost to cover if we covered in Black Vinyl Whisper?

Dale99 · 02-01-2013, 07:48 AM

Quote:

Originally Posted by crsweet91

I am looking for some buckets to do. If anyone has a set laying around thats willing to sell them to me for a good price let me know.

I'm looking to get my buckets done and rear seat, but not sell. Was about to ask this exact question, lol.

crsweet91 · 02-01-2013, 11:35 AM

Quote:

Originally Posted by Dale99

I'm looking to get my buckets done and rear seat, but not sell. Was about to ask this exact question, lol.

Im willing to do whatever youd want to ship. Some things arent worth the added cost, but if you felt no one local could do it. Or you wanted me to put my own design style into it then you can ship it.
Posted via Mobile Device

Dale99 · 02-01-2013, 12:26 PM

I dont think shipping all 3 seats would be feasible?? Would likely have to make a crate and freight ship

Was kinda hoping you already had patterns and could make what I want, and me put them on. Your work looks amazing to me.

crsweet91 · 02-01-2013, 12:35 PM

Quote:

Originally Posted by Dale99

I dont think shipping all 3 seats would be feasible?? Would likely have to make a crate and freight ship

Was kinda hoping you already had patterns and could make what I want, and me put them on. Your work looks amazing to me.

Yeah youd need to freight or try and break them down to box up. Thats why I mentioned its not always worth it to ship. If you want your seats just recovered stick local. If you want me to do a lot of work to them, redesign your seats, then shipping isnt that much compared to the overall cost.

I dont usually do covers to sell, but if you wanted some made up message me and Ill let you know.

crsweet91 · 03-26-2013, 06:39 PM

wow. I havent bumped this in a while.

**68 Four on the Floor** · 03-26-2013, 08:04 PM

can you wrap the older style armrests the big blocky ones?

keh27 · 03-26-2013, 10:34 PM

i would like to have a dash panel done, visors, and 1969 metal door panels.... my seats are buckets ,black with white hounds tooth new.....so i would like something to go with them. pm me if you need pics

crsweet91 · 03-27-2013, 05:39 PM

Quote:

Originally Posted by 68 Four on the Floor

can you wrap the older style armrests the big blocky ones?

Yeah. Make sure theyre in good condition though. The better the condition, the better theyll turn out. Buy repops to wrap if you have to.
Posted via Mobile Device

crsweet91 · 03-27-2013, 05:39 PM

Quote:

Originally Posted by keh27

i would like to have a dash panel done, visors, and 1969 metal door panels.... my seats are buckets ,black with white hounds tooth new.....so i would like something to go with them. pm me if you need pics

Ill pm you.
Posted via Mobile Device

01-25-2013, 09:40 PM	#201
crsweet91 Registered User Join Date: Mar 2012 Location: Antioch, CA Posts: 265	Re: Dash Pad- Covered With French Seam Here it is finished up. Black vinyl, trunk liner carpet on the inside. Stainless cupholders. Message me if your interested. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device

01-28-2013, 01:09 PM	#202
crsweet91 Registered User Join Date: Mar 2012 Location: Antioch, CA Posts: 265	Re: Dash Pad- Covered With French Seam ^^^The above console is looking for a home.

01-29-2013, 02:09 AM	#203
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Dash Pad- Covered With French Seam like seeing yor finished products great craftsmanship __________________ project: "my happy mess"

01-29-2013, 03:35 AM	#204
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,325	Re: Dash Pad- Covered With French Seam real talent there, very nice ,ill be in touch when i get to that part of the build __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

01-29-2013, 06:54 AM	#205
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Dash Pad- Covered With French Seam great work! when the time comes.............. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

01-29-2013, 07:06 AM	#206
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Dash Pad- Covered With French Seam WOW that looks beautifullllll!!!!!!!!!!!!!!!!!!!!!!!!!

01-29-2013, 10:59 PM	#207
crsweet91 Registered User Join Date: Mar 2012 Location: Antioch, CA Posts: 265	Re: Dash Pad- Covered With French Seam Visors look like this? These were already redone by someone once before. Send them to me and Ill make them look like this. Might only be visors, but I take time to make sure theyre nice. I turn off my motor and handwheel my sewing machine for each visor to make sure the stitches are nice and straight. Also wrapped some armrests. This is all black whisper vinyl.

01-30-2013, 01:19 AM	#208
SCOOBYDOOBYDOO Registered User Join Date: Feb 2010 Location: DANA POINT CA Posts: 256	Re: Dash Pad- Covered With French Seam Man your work is awesome what would you charge to do visors wish I had the money to do the d as h pad Posted via Mobile Device __________________ ScoobyDoobyDoo

01-30-2013, 09:51 AM	#210
tabarcus 72ChevyStep Join Date: Jun 2009 Location: Fredericksburg, VA Posts: 545	Re: Dash Pad- Covered With French Seam Nice work. So what is the secret to getting the material to conform and adhere to the contours of the arm rests?

01-30-2013, 12:51 PM	#212
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 335	Re: Dash Pad- Covered With French Seam Care to share what adhesive you use? I buy proffessional grade high heat adhesive by the gallon and spray it. If you tried doing any of this with a spray can it wouldnt work. Thanks, John __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

01-30-2013, 04:29 PM	#214
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: Dash Pad- Covered With French Seam Connor, have you ever made bench seat covers out of the same material? Is that something you could do as well? __________________ 1972 C10 Highlander - The making of a daily driver

01-31-2013, 10:59 PM	#216
tabarcus 72ChevyStep Join Date: Jun 2009 Location: Fredericksburg, VA Posts: 545	Re: Dash Pad- Covered With French Seam Conner, What can you do with these door panels? You know the handles are Black Vinyl Whisper. Ivory/Parchment vinyl might be an offsetting color I might consider. Looking for creative ideas! What would be the estimated cost to cover if we covered in Black Vinyl Whisper? Attached Images Last edited by tabarcus; 01-31-2013 at 11:06 PM.

02-01-2013, 12:26 PM	#219
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Dash Pad- Covered With French Seam I dont think shipping all 3 seats would be feasible?? Would likely have to make a crate and freight ship Was kinda hoping you already had patterns and could make what I want, and me put them on. Your work looks amazing to me.

03-26-2013, 06:39 PM	#221
crsweet91 Registered User Join Date: Mar 2012 Location: Antioch, CA Posts: 265	Re: Dash Pad- Covered With French Seam wow. I havent bumped this in a while.

03-26-2013, 08:04 PM	#222
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Dash Pad- Covered With French Seam can you wrap the older style armrests the big blocky ones?



Register or Log In To remove these advertisements.

03-26-2013, 10:34 PM	#223
keh27 Registered User Join Date: Jul 2012 Location: franklin.tn Posts: 600	Re: Dash Pad- Covered With French Seam i would like to have a dash panel done, visors, and 1969 metal door panels.... my seats are buckets ,black with white hounds tooth new.....so i would like something to go with them. pm me if you need pics

Register or Log In To remove these advertisements.