PA So 1 more 72 blazer going under the knife - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 07-01-2018, 11:25 AM

Yes, I do have an automatic column I will get you some pictures

**1rippen6** · 07-02-2018, 03:26 PM

Quote:

Originally Posted by Rickey

Would you have a automatic steering column
Thanks
Rickey

Ended up helping my brother in law today I will get you some pictures tomorrow.

**1rippen6** · 07-03-2018, 12:26 PM

Quote:

Originally Posted by Rickey

Would you have a automatic steering column
Thanks
Rickey

Here is the black one can get better pictures if you like the sun was in the wrong place this morning. 75 plus shipping the steering wheel is junk so I would remove it for ease of shipping. I also have a tan one if you need that color.

**1rippen6** · 07-03-2018, 12:27 PM

Forgot to add picture!

littleherc · 07-19-2018, 12:19 AM

hows the windshield frame?

**1rippen6** · 07-19-2018, 12:24 AM

Quote:

Originally Posted by littleherc

hows the windshield frame?

It's junk

best view · 08-10-2018, 06:57 AM

looking for antenna complete to 02327 ken

**1rippen6** · 08-10-2018, 03:17 PM

I'll look and let you know tomorrow.

**1rippen6** · 08-12-2018, 10:56 PM

Antenna ball end was broke off I have another blazer I'm going to part in a few weeks and will check that out.

best view · 08-13-2018, 09:20 PM

thanks ill wait to hear from u don't forget me also I need the script from the outside glovebox don't know how that dissapeared

**jaros44sr** · 10-31-2018, 09:42 AM

1rippen6, do you have any tail light lenses and back up lenses for a blazer?

**1rippen6** · 10-31-2018, 10:00 AM

Quote:

Originally Posted by jaros44sr

1rippen6, do you have any tail light lenses and back up lenses for a blazer?

I will look I think most of the decent stuff I already sold.

**1rippen6** · 10-31-2018, 11:42 AM

Quote:

Originally Posted by jaros44sr

1rippen6, do you have any tail light lenses and back up lenses for a blazer?

Sorry, what I have left would be a push to call them daily drivers.

Madkidd007 · 12-10-2018, 02:01 AM

Quote:

Originally Posted by Rickey

Would you have a automatic steering column
Thanks
Rickey

Any chance you have any bedsides that you can do a taillight cut? Both sides either way shown

Madkidd007 · 12-10-2018, 02:02 AM

Did not mean to reply to that specific quote

**1rippen6** · 12-11-2018, 08:06 PM

I have some cut off just don't remember what shape there in. I'll pull them out tomorrow and look.

**1rippen6** · 12-14-2018, 03:01 PM

Only one I found is this one 30 plus shipping if interested send me your zip and I will get a quote.

Madkidd007 · 12-14-2018, 03:08 PM

Quote:

Originally Posted by 1rippen6

Only one I found is this one 30 plus shipping if interested send me your zip and I will get a quote.

Will take it pending shipping, PM sent

**1rippen6** · 12-14-2018, 04:13 PM

Quote:

Originally Posted by Madkidd007

Will take it pending shipping, PM sent

Looks like 18 for shipping let me know if still interested.

Madkidd007 · 12-14-2018, 08:44 PM

Quote:

Originally Posted by 1rippen6

Looks like 18 for shipping let me know if still interested.

Will take it. What’s your Paypal email

NJKelly · 12-16-2018, 02:22 PM

Do you have the shift lever and the bellcrank for the automatic transmission. I'll try to attach a picture. Thanks

**1rippen6** · 12-16-2018, 04:16 PM

Yes, 45 plus shipping if still interested send me your zip and I'll get a quote.

NJKelly · 12-16-2018, 08:28 PM

Quote:

Originally Posted by 1rippen6

Yes, 45 plus shipping if still interested send me your zip and I'll get a quote.

I don't think that's the part I need, this is for 72 Blazer

**1rippen6** · 12-16-2018, 09:37 PM

That's the bell crank and shift rod from the column. I may have the shift lever also I'll look tomorrow.

NJKelly · 12-16-2018, 10:09 PM

Quote:

Originally Posted by 1rippen6

That's the bell crank and shift rod from the column. I may have the shift lever also I'll look tomorrow.

I just ordered the shift lever, I'm going to try it out with the bellcrank I have. Your picture makes it look smaller than it probably actually is

07-01-2018, 11:25 AM	#201
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife Yes, I do have an automatic column I will get you some pictures

07-03-2018, 12:27 PM	#204
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife Forgot to add picture! Attached Images

07-19-2018, 12:19 AM	#205
littleherc Registered User Join Date: Jul 2018 Location: cen cal Posts: 29	Re: So 1 more 72 blazer going under the knife hows the windshield frame?

08-10-2018, 06:57 AM	#207
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,164	Re: So 1 more 72 blazer going under the knife looking for antenna complete to 02327 ken

08-10-2018, 03:17 PM	#208
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife I'll look and let you know tomorrow.

08-12-2018, 10:56 PM	#209
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife Antenna ball end was broke off I have another blazer I'm going to part in a few weeks and will check that out.

08-13-2018, 09:20 PM	#210
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,164	Re: So 1 more 72 blazer going under the knife thanks ill wait to hear from u don't forget me also I need the script from the outside glovebox don't know how that dissapeared

10-31-2018, 09:42 AM	#211
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,768	Re: So 1 more 72 blazer going under the knife 1rippen6, do you have any tail light lenses and back up lenses for a blazer? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-10-2018, 02:02 AM	#215
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,239	Re: So 1 more 72 blazer going under the knife Did not mean to reply to that specific quote __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

12-11-2018, 08:06 PM	#216
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife I have some cut off just don't remember what shape there in. I'll pull them out tomorrow and look.

12-14-2018, 03:01 PM	#217
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife Only one I found is this one 30 plus shipping if interested send me your zip and I will get a quote. Attached Images

12-16-2018, 02:22 PM	#221
NJKelly Registered User Join Date: Mar 2018 Location: New Jersey Posts: 379	Re: So 1 more 72 blazer going under the knife Do you have the shift lever and the bellcrank for the automatic transmission. I'll try to attach a picture. Thanks Attached Images

12-16-2018, 04:16 PM	#222
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife Yes, 45 plus shipping if still interested send me your zip and I'll get a quote. Attached Images

12-16-2018, 09:37 PM	#224
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife That's the bell crank and shift rod from the column. I may have the shift lever also I'll look tomorrow.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.