My Facetruck thread. - Page 90 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**davischevy** · 11-10-2019, 12:02 PM

Quote:

Originally Posted by Killer Bee

Mrs. Bee under an FL80

Killer, I thought you were the truck mechanic. I'ts nice to know your better half has a vocation that could support you someday.

**special-K** · 11-12-2019, 07:18 AM

Nothing sexier than a woman on her back... on a creeper!

Killer Bee · 11-19-2019, 03:34 PM

Quote:

Originally Posted by davischevy

Killer, I thought you were the truck mechanic. I'ts nice to know your better half has a vocation that could support you someday.

back in the early days, we were both stationed in kuwait.. I was in charge of the maint shop and she was on a boat crew..

every rotation when a boat came off the water, the crew came with it to work in the shop..

I put 'em all to work on trucks and boats, no favoritism

Killer Bee · 11-19-2019, 03:36 PM

Quote:

Originally Posted by special-K

Nothing sexier than a woman on her back... on a creeper!

she looks sexy no matter what she's doin'

**special-K** · 11-19-2019, 07:36 PM

I won't argue

**davischevy** · 11-19-2019, 07:58 PM

Killer, that could well be the shortest answer I've ever seen special-K give. ��

**davischevy** · 11-19-2019, 10:24 PM

Tim must have a date tonight.

**Ol Blue K20** · 11-19-2019, 11:08 PM

Sometimes, not very often but sometimes.....I know when to be quiet. This is one of those rare moments.

**special-K** · 11-20-2019, 07:24 AM

Quote:

Originally Posted by Ol Blue K20

Sometimes, not very often but sometimes.....I know when to be quiet. This is one of those rare moments.

Yep. We're talking about a man's wife... one with a gun... who knows how to use it... and so does he... AND this one is a friend's wife

**special-K** · 11-20-2019, 08:53 AM

Quote:

Originally Posted by davischevy

Buyer beware, built for internet sale.

I spotted a 72 Cheyenne SWB, big block in California for sale. It looked like a solid truck, and claimed to be a frame off. I checked the location, and I have a relative in the same town as the truck. Since he is a gear head too, I asked if he had time to check it out. He did and it was a big disappointment. The truck may have been off the frame, but they didn't clean anything and if you looked in the passenger rear corner you could see the ground.

My inspector was not impressed. The truck was no bargain, fairly priced for a nice restoration.

Yesterday I stopped at a local shop that does 4x4's and custom fabrication. They had two nice looking Advanced Design trucks that belonged to different customers. The owners had bought them off internet auctions.

One owner had the truck shipped. He took it for a drive and was pretty much afraid to drive it...

I have one such experience to report happening to me. No, I didn't hire an inspector. It wasn't exactly through the internet, but the place had a website with pictures. I found the '72 K/20 Highlander in Hemmings Motor News. It was offered by Classical Gas Station in CO. They were a big classic car dealership that I could see pretty much sold stuff the way they bought it. They had a lot of great inventory from top shelf/top dollar to abandoned project rollers, but all good old stuff.

So my truck was unrestored with lots of options original paint and no rust. I felt the price was reasonable enough for what it was that I could sort anything out that it needed. I just wanted a driver. Although I still don't think I got ripped off money-wise, I was certainly misled. I thought I saw enough pictures, but learned never too many. My main issue was I had planned to drive it home and they were saying "Drive anywhere". It's a good thing I ended up having it shipped.

Truck shows up and driver is saying what a PIA the truck has been to move with no clutch. It had NO clutch at all. Start in Granny or reverse

First time out, headed up to the corner for fuel 1/2 mile up the road I turned around because the front tires were bouncing like basketballs at 40 mph. Ball-joints way way way shot.

I figure I'll run it slow on backroads up to my shop to fix it. About 1/2 mile the other direction going up the big hill I shift to 4th and it about came to a stop when I pushed the clutch. Calipers stuck and hot hot!

Drive anywhere as long as it's a repair garage! The next time I drove that truck it had everything new in steering, brakes, and bearings.

Driving it home, going down Main St, I hit a manhole and half a spring leaf is tanging and bangin' down the road, stop, pick it up, wave to the residents watching the truck that falls apart when you drive it

All new suspension and while I was at it I did all the drive shaft u-joints since I saw that one was bad. Axles I already did. had to build a new rear driveshaft. I got new wheels and tires since it was two pair of old tires on two Ford/two GM wheels.

It turned out the tool & stowage door was a rare '73 door. It actually opened and shut well, but had the wrong contour. I could see in the pictures it was all white with no trim like the rest of the truck, but couldn't tell it was the wrong door. I had a rust free one stashed and sold the '73 door. I wasn't worried about the door because I had another, but still it was an unexpected surprise. That and it had the wrong radio when I asked if it still had the original one.

**davischevy** · 11-20-2019, 11:43 AM

When I bought this K10 I'm working on now, I bought it cheap enough I figured I could sort out the problems. I was in a position to go pick it up, so if it had been worse than I expected I could forfeit my $500 and go on my way.

I was pleasantly surprised when I got there. The truck had very little rust as advertised and It ran and drove like a dream.

Now it's scattered all over my shop. That is one reason I have been relatively quiet here lately. I am determined to finish this thing in a year.

I got to got do some sand blasting now.

**davischevy** · 11-20-2019, 11:44 AM

Quote:

Originally Posted by special-K

Yep. We're talking about a man's wife... one with a gun... who knows how to use it... and so does he... AND this one is a friend's wife

I had no idea you were so afraid of guns.

**special-K** · 11-20-2019, 11:49 PM

I like the new signature. Reminds me of a guy I had working for me. He was never found dead on the bike path between his dad's house (where he lived) and the bar, but I recall he was found sleeping it off the next morning by the police after concerned citizens called. Another time he rode the bicycle. Coming home he couldn't ride it, got tired of pushing it, left it behind, and forgot where that was. I could start a thread of stories about that guy. I hired him for entertainment.

**davischevy** · 11-20-2019, 11:52 PM

Are you drinking tonight Tim? You are repeating yourself again.

**3757chevy** · 11-21-2019, 01:40 AM

Quote:

Originally Posted by davischevy

Are you drinking tonight Tim? You are repeating yourself again.

Whew! I thought I was seeing double.

**Getter-Done** · 11-21-2019, 07:24 AM

Quote:

Originally Posted by special-K

I like the new signature. Reminds me of a guy I had working for me. He was never found dead on the bike path between his dad's house (where he lived) and the bar, but I recall he was found sleeping it off the next morning by the police after concerned citizens called. Another time he rode the bicycle. Coming home he couldn't ride it, got tired of pushing it, left it behind, and forgot where that was. I could start a thread of stories about that guy. I hired him for entertainment.

I worked with that guy a my last job

JK

.

**special-K** · 11-21-2019, 07:58 AM

Quote:

Originally Posted by davischevy

Are you drinking tonight Tim? You are repeating yourself again.

Not yet. That's why I have the shakes. I thought I deleted all the duplicates. I guess I missed one.

Quote:

Originally Posted by 3757chevy

Whew! I thought i was seeing double.

You were. I put for my reason for deleting "Auto-duplicating Post"

Quote:

Originally Posted by Getter-Done

I worked with that guy a my last job

JK.

You worked with Bruce, too??

That guy was a story in himself. I knew him since high school. He was a great guy when sober (when I'd hire him). I think he came and went three or four times. I used to be a lot more tolerant. Too tolerant. I don't know if I want to tell all the stories. Might reflect poorly upon my person

Here we are in the nursing home:

**davischevy** · 11-26-2019, 11:19 PM

This picture was taken 48 years ago tonight. We said I do, and we did.

Killer Bee · 11-26-2019, 11:32 PM

you make a handsome couple!

I would have enjoyed the wedding, between diaper changes

just funnin', congrats on 48 years!

kingsolver72 · 11-26-2019, 11:32 PM

Congrats Larry!

**davischevy** · 11-26-2019, 11:38 PM

I had a lot more hair and a lot less gut.

'63GENIII · 11-26-2019, 11:41 PM

Congrats to you and your better half there Larry. A lot of work and dedication went into those 48!

Wishing you many more.

**Steeveedee** · 11-27-2019, 12:02 AM

Congratulations!

**Chevyland** · 11-27-2019, 12:02 AM

Quote:

Originally Posted by davischevy

This picture was taken 48 years ago tonight. We said I do, and we did.

**Ol Blue K20** · 11-27-2019, 01:30 AM

Congratulations and Happy Anniversary.

11-12-2019, 07:18 AM	#2227
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: My Facetruck thread. Nothing sexier than a woman on her back... on a creeper! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-19-2019, 07:36 PM	#2230
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: My Facetruck thread. I won't argue __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-19-2019, 07:58 PM	#2231
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: My Facetruck thread. Killer, that could well be the shortest answer I've ever seen special-K give. �� __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-19-2019, 10:24 PM	#2232
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: My Facetruck thread. Tim must have a date tonight. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-19-2019, 11:08 PM	#2233
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: My Facetruck thread. Sometimes, not very often but sometimes.....I know when to be quiet. This is one of those rare moments. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

11-20-2019, 11:43 AM	#2236
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: My Facetruck thread. When I bought this K10 I'm working on now, I bought it cheap enough I figured I could sort out the problems. I was in a position to go pick it up, so if it had been worse than I expected I could forfeit my $500 and go on my way. I was pleasantly surprised when I got there. The truck had very little rust as advertised and It ran and drove like a dream. Now it's scattered all over my shop. That is one reason I have been relatively quiet here lately. I am determined to finish this thing in a year. I got to got do some sand blasting now. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-20-2019, 11:49 PM	#2238
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: My Facetruck thread. I like the new signature. Reminds me of a guy I had working for me. He was never found dead on the bike path between his dad's house (where he lived) and the bar, but I recall he was found sleeping it off the next morning by the police after concerned citizens called. Another time he rode the bicycle. Coming home he couldn't ride it, got tired of pushing it, left it behind, and forgot where that was. I could start a thread of stories about that guy. I hired him for entertainment. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-20-2019, 11:52 PM	#2239
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: My Facetruck thread. Are you drinking tonight Tim? You are repeating yourself again. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-26-2019, 11:19 PM	#2243
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: My Facetruck thread. This picture was taken 48 years ago tonight. We said I do, and we did. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-26-2019, 11:32 PM	#2244
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,797	Re: My Facetruck thread. you make a handsome couple! I would have enjoyed the wedding, between diaper changes just funnin', congrats on 48 years! __________________ *I started out with nothing - and I still have most of it*

11-26-2019, 11:32 PM	#2245
kingsolver72 10/30/19 Join Date: Aug 2004 Location: ottawa kansas Posts: 5,244	Re: My Facetruck thread. Congrats Larry!

11-26-2019, 11:38 PM	#2246
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,839	Re: My Facetruck thread. I had a lot more hair and a lot less gut. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-26-2019, 11:41 PM	#2247
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: My Facetruck thread. Congrats to you and your better half there Larry. A lot of work and dedication went into those 48! Wishing you many more. __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

11-27-2019, 12:02 AM	#2248
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,614	Re: My Facetruck thread. Congratulations! __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

11-27-2019, 01:30 AM	#2250
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: My Facetruck thread. Congratulations and Happy Anniversary. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.