'66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... - Page 90 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nds1968 · 09-25-2015, 08:59 PM

Can't wait to see this finished! Great job so far...

Frizzle Fry · 09-29-2015, 01:58 PM

Quote:

Originally Posted by -Greg72

The most terrifying step..... "Scratching" all that beautiful new paintwork on purpose!!

The final buff out is going to be mind blowing. Can't wait!
-G

It was hard to accept but I have absolute faith in Karl

Quote:

Originally Posted by nds1968

Can't wait to see this finished! Great job so far...

Thanks Man!

Coming Along

watahyahknow · 09-29-2015, 03:10 PM

like glass , realy good looking

ajgriffin · 09-29-2015, 03:20 PM

Looks great! What are the pieces of tape for on the panels? Looks like there are 4 pieces to point something out...1 behind the passenger rear door, another on the passenger rear quarter and 2 on the passenger side fender

Frizzle Fry · 09-29-2015, 07:36 PM

I'm not there, but yes that's the general idea.
Posted via Mobile Device

lowrollin70gmc · 09-29-2015, 11:12 PM

Quote:

Originally Posted by ajgriffin

Looks great! What are the pieces of tape for on the panels? Looks like there are 4 pieces to point something out...1 behind the passenger rear door, another on the passenger rear quarter and 2 on the passenger side fender

It looks like they are cutting and buffing the paint so the tape is where the painter sees something he wants to come back to and polish a little more. It's easier to wet sand and buff an entire panel (which look great on this car) at once. Then nit pick and come back for little details.

my67chevytruck · 09-30-2015, 08:18 AM

Very nice!!!

knomadd · 09-30-2015, 09:51 AM

That's coming out great! I've used that tape method before. As others have already said, it's to mark locations that need more attention. Whether that's just more polishing, or more wet sanding and polishing, it's just a way to make sure you don't forget about something you aren't happy with.

mcbassin · 09-30-2015, 09:56 AM

Paint looks incredible!

-Greg72 · 09-30-2015, 08:15 PM

That paint is so perfect I can see MY reflection in it!!!!!!

-G

watahyahknow · 10-01-2015, 02:28 AM

greg ...... stop licking the monitor

Low Elco · 10-01-2015, 12:43 PM

Coming along well! Stoked for you!

sparkydog · 10-02-2015, 12:09 AM

Approximately when are the burnout pics?

Frizzle Fry · 10-03-2015, 12:38 PM

Quote:

Originally Posted by lowrollin70gmc

It looks like they are cutting and buffing the paint so the tape is where the painter sees something he wants to come back to and polish a little more. It's easier to wet sand and buff an entire panel (which look great on this car) at once. Then nit pick and come back for little details.

Edzackery!

Quote:

Originally Posted by my67chevytruck

Very nice!!!

Quote:

Originally Posted by knomadd

That's coming out great!

Quote:

Originally Posted by mcbassin

Paint looks incredible!

Quote:

Originally Posted by -Greg72

That paint is so perfect I can see MY reflection in it!!!!!!

-G

Quote:

Originally Posted by watahyahknow

greg ...... stop licking the monitor

Quote:

Originally Posted by Low Elco

Coming along well! Stoked for you!

Thanks guys. Karl's work is insanely good, right?!? Couldn't be happier

Quote:

Originally Posted by sparkydog

Approximately when are the burnout pics?

Spring..?

Too many predictions have come and gone. Lot's of work yet to be done including painting the engine/trans and powdercoating suspension parts, etc. But it's all downhill from here, right..?

Frizzle Fry · 10-03-2015, 12:41 PM

Latest pics. These were taken with my phone yesterday and show a truer representation of the color:

watahyahknow · 10-03-2015, 12:56 PM

realy like the colour it kindof grabs you by the troat lifts you up and shakes you around
noone will miss it in a line up thats for sure

Frizzle Fry · 10-03-2015, 01:19 PM

Quote:

Originally Posted by watahyahknow

kindah liked the pastel colour that was on it , th not so bright / faded colour fits the year of the car

Quote:

Originally Posted by watahyahknow

realy like the colour it kindof grabs you by the troat lifts you up and shakes you around
noone will miss it in a line up thats for sure

Glad you came around

watahyahknow · 10-03-2015, 03:08 PM

like i said before , i hadnt seen the colour on the car when it was allmost put together
it still looks a bit to modern but ohw man its "out there" no sleeper look on this car

the pastelblue might be more period correct still but would post a statement like this colour does

Frizzle Fry · 10-04-2015, 07:43 AM

Quote:

Originally Posted by watahyahknow

like i said before , i hadnt seen the colour on the car when it was allmost put together
it still looks a bit to modern but ohw man its "out there" no sleeper look on this car

the pastelblue might be more period correct still but would post a statement like this colour does

You're right, I've deviated completely from the sleeper theme haven't I?

Posted via Mobile Device

Low Elco · 10-06-2015, 01:10 PM

Man that looks tight! Nice job to all!

38chevyhotrod · 10-06-2015, 04:02 PM

The color came out nice(at least on the pictures)
I know for a fact that pictures don't do justice.

67ChevyRedneck · 10-07-2015, 02:18 PM

OMG! Is that a ding???

I kid.... I kid....

watahyahknow · 10-07-2015, 04:43 PM

theres a joke i seen once pulled on the proud owner of a car :
take a piece of ducktape and pull out one of the strands
kindah trow it against the bodywork and it will look like a scratch
then go to the owner and ask if he seen the ....etc
once hes done venting his frustration tell him you have a trick to remove the scratch and use youre finger to rub the strand intoo a ball
might be good for a laugh sometimes

ajgriffin · 10-07-2015, 07:34 PM

Quote:

Originally Posted by Frizzle Fry

Spring..?

Too many predictions have come and gone. Lot's of work yet to be done including painting the engine/trans and powdercoating suspension parts, etc. But it's all downhill from here, right..?

My buddy and I joke that once we have it figured out how long our project will take, apply a quad to it and you have it just about right! LOL

This paint is so killer! Whatever the look, the car looks awesome and I'm enjoying the ride watching it come together!

67ChevyRedneck · 10-08-2015, 10:42 AM

With the car being at the paint shop for so long... doesn't that free up time and shop space at home for a certain Chevrolet Tahoe???

09-25-2015, 08:59 PM	#2226
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Can't wait to see this finished! Great job so far... __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

09-29-2015, 03:10 PM	#2228
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... like glass , realy good looking __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

09-29-2015, 03:20 PM	#2229
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Looks great! What are the pieces of tape for on the panels? Looks like there are 4 pieces to point something out...1 behind the passenger rear door, another on the passenger rear quarter and 2 on the passenger side fender __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

09-29-2015, 07:36 PM	#2230
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I'm not there, but yes that's the general idea. Posted via Mobile Device

09-30-2015, 08:18 AM	#2232
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Very nice!!! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

09-30-2015, 09:51 AM	#2233
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... That's coming out great! I've used that tape method before. As others have already said, it's to mark locations that need more attention. Whether that's just more polishing, or more wet sanding and polishing, it's just a way to make sure you don't forget about something you aren't happy with. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

09-30-2015, 09:56 AM	#2234
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Paint looks incredible! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

09-30-2015, 08:15 PM	#2235
-Greg72 Registered User Join Date: Nov 2001 Location: Austin, TX Posts: 308	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... That paint is so perfect I can see MY reflection in it!!!!!! -G __________________ 1972 K5 - 502BBC/4L80E/Magnum205/Mog-9s/5.26s/38" BFG KM2s Find me on INSTAGRAM @MIGHTASWELLK5 '72 K5 - Greg's "Might As Well™" Build

10-01-2015, 02:28 AM	#2236
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... greg ...... stop licking the monitor __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-01-2015, 12:43 PM	#2237
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Coming along well! Stoked for you! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

10-02-2015, 12:09 AM	#2238
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Approximately when are the burnout pics? __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff

10-03-2015, 12:41 PM	#2240
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Latest pics. These were taken with my phone yesterday and show a truer representation of the color:

10-03-2015, 12:56 PM	#2241
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... realy like the colour it kindof grabs you by the troat lifts you up and shakes you around noone will miss it in a line up thats for sure __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-03-2015, 03:08 PM	#2243
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... like i said before , i hadnt seen the colour on the car when it was allmost put together it still looks a bit to modern but ohw man its "out there" no sleeper look on this car the pastelblue might be more period correct still but would post a statement like this colour does __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 10-03-2015 at 03:14 PM.

10-06-2015, 01:10 PM	#2245
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Man that looks tight! Nice job to all! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!



Register or Log In To remove these advertisements.

10-06-2015, 04:02 PM	#2246
38chevyhotrod Registered User Join Date: Jun 2007 Location: Netherlands Posts: 191	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... The color came out nice(at least on the pictures) I know for a fact that pictures don't do justice. __________________ Anybody can restore a classic, takes a man to cut one up..... http://www.arnoldscustoms.com

10-07-2015, 02:18 PM	#2247
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... OMG! Is that a ding??? I kid.... I kid.... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-07-2015, 04:43 PM	#2248
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... theres a joke i seen once pulled on the proud owner of a car : take a piece of ducktape and pull out one of the strands kindah trow it against the bodywork and it will look like a scratch then go to the owner and ask if he seen the ....etc once hes done venting his frustration tell him you have a trick to remove the scratch and use youre finger to rub the strand intoo a ball might be good for a laugh sometimes __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-08-2015, 10:42 AM	#2250
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... With the car being at the paint shop for so long... doesn't that free up time and shop space at home for a certain Chevrolet Tahoe??? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

Register or Log In To remove these advertisements.