** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 90 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FrankieD · 11-13-2011, 10:42 PM

Loud pipes save lives

drewskiren · 11-14-2011, 12:00 AM

Quote:

Originally Posted by jb1016

Does it currently turn down behind the cab? You could just run it all the way back to the rear bumper; that would hush it up a little.

All my air ride and panhard rod make it way too tight to get it to the rear. Right now it dumps under the cab, I need to have it turned out in front of the rear tire.

drewskiren · 11-14-2011, 12:14 AM

Getting ready for a maiden voyage!!

It took 4 trips to the auto parts store, but they finally sold me the right rear brakes and rotors. We then had to bleed them down/purge most of the old fluid out.

I got the new intake system installed, but I think I will modify it again.

**thelonerife** · 11-14-2011, 12:19 AM

Drew I need you to paint my truck. I just can't get motivated.

jbclassix · 11-14-2011, 12:21 AM

Quote:

Originally Posted by drewskiren

Getting ready for a maiden voyage!!...

Video! Video! Video!

7dee2 · 11-14-2011, 12:22 AM

Man it is getting busy under that hood.. Maiden voyage!

drewskiren · 11-14-2011, 03:48 AM

Not so fast on the maiden voyage.

I rebuilt the air intake lower and tighter to the engine, much better looking. I also installed the Denali engine cover set which really cleans up the LS engine.

Gokart Mozart · 11-14-2011, 06:46 AM

She's Alive..... Aliiiiiiiiiiiiiiiive! -...

:notworthy:
Would it be feasible to cut the bottom half of the overflow tank and mold it to fit the fender? I'm also wondering of a modern motorcycle gas cap will fit.

71Sleeper · 11-14-2011, 06:55 AM

The engine cover is well worth whatever you paid for it. Looks very clean now. It’s as big if not bigger of an improvement then the rad support.

drewskiren · 11-14-2011, 09:56 AM

Quote:

Originally Posted by 71Sleeper

The engine cover is well worth whatever you paid for it. Looks very clean now. It’s as big if not bigger of an improvement then the rad support.

Uhhhhh, that would be free!?!

Thanks.

**67cheby** · 11-14-2011, 10:08 AM

i like how the engine cover matches the recess in the firewall...looks like it was made for it , nice work!

**oldman3** · 11-14-2011, 10:35 AM

Looking good.....Jim

chinky · 11-14-2011, 10:50 AM

nice pictures.........wonderful cars

big_al_71 · 11-14-2011, 11:12 AM

Wow amazing build..

mcbassin · 11-14-2011, 12:51 PM

Looking good Drew! I like the engine cover too. I need to find one.....you have another free one?

drewskiren · 11-14-2011, 02:07 PM

Quote:

Originally Posted by mcbassin

Looking good Drew! I like the engine cover too. I need to find one.....you have another free one?

Thanks,
I'm all out of spare parts, but it couldn't cost much in a junkyard. Make sure to get the 3 piece one off of a 6.0 Denali.

**67cheby** · 11-14-2011, 02:13 PM

i think they are about 120 new from chevy...just fyi in case you price a used one you will know how much a new one is

drewskiren · 11-14-2011, 08:35 PM

Quote:

Originally Posted by thelonerife

Drew I need you to paint my truck. I just can't get motivated.

Every time I paint something I swear I'll never do it again. It usually takes me at least 3 years to forget.

**Dieselwrencher** · 11-14-2011, 08:39 PM

Awesome Drew! You are making great progress on him!

drewskiren · 11-15-2011, 01:02 AM

Lookie, Lookie, something came in the mail.

It's so much nicer than my little Lincoln welder. I made up these silly little brackets, one to mount the bottom of the hood latch vertical mounting arm and the other one to secure the power steering cooler lines.

71Sleeper · 11-15-2011, 01:06 AM

Nothing like getting a new toy to play with.....

mcbassin · 11-15-2011, 01:08 AM

Good looking welder Drew. Let me know how it works out for you. I'm kinda in the market for a new body work mig. or well at least new to me.

VA72C10 · 11-15-2011, 03:09 AM

Nice! Like how you color matched it to the truck

7dee2 · 11-15-2011, 12:39 PM

Quote:

Originally Posted by drewskiren

Not so fast on the maiden voyage.

I rebuilt the air intake lower and tighter to the engine, much better looking. I also installed the Denali engine cover set which really cleans up the LS engine.

Looks great, the after market air intake the engine cover. I agree the cover looks like it was built for this application. Starts, runs and even if the exhaust is a little noisy (That's a good thing by the way) you gotta be happy. When you get the interior back in I bet it won't be that loud inside and if so redirect the exhaust as you mentioned earlier.

I to am in the market for a welder and would like to hear your thoughts on this Miller?

Good job!

Pop's C-10 · 11-15-2011, 08:04 PM

A spectre 90 & 45 to get the fillter closer to tha core surport would make the intake fit in better & hi temp black it..

11-13-2011, 10:42 PM	#2226
FrankieD Registered User Join Date: Jan 2011 Location: Gilberts IL. Posts: 2,488	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Loud pipes save lives __________________ 94 k2500 EXCab Long Bed 350ci New Toy 95 K2500 Suburban New PlowTruck 454ci Support our Troops @ http://anyairman.com http://www.woundedwarriorproject.org/

11-14-2011, 12:14 AM	#2228
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Getting ready for a maiden voyage!! It took 4 trips to the auto parts store, but they finally sold me the right rear brakes and rotors. We then had to bleed them down/purge most of the old fluid out. I got the new intake system installed, but I think I will modify it again. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-14-2011, 12:19 AM	#2229
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew I need you to paint my truck. I just can't get motivated. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-14-2011, 12:22 AM	#2231
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,984	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Man it is getting busy under that hood.. Maiden voyage! __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

11-14-2011, 03:48 AM	#2232
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Not so fast on the maiden voyage. I rebuilt the air intake lower and tighter to the engine, much better looking. I also installed the Denali engine cover set which really cleans up the LS engine. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-14-2011, 06:55 AM	#2234
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. The engine cover is well worth whatever you paid for it. Looks very clean now. It’s as big if not bigger of an improvement then the rad support. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

11-14-2011, 10:08 AM	#2236
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. i like how the engine cover matches the recess in the firewall...looks like it was made for it , nice work! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-14-2011, 10:35 AM	#2237
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking good.....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

11-14-2011, 10:50 AM	#2238
chinky Registered User Join Date: Nov 2011 Location: New York Posts: 1	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. nice pictures.........wonderful cars

11-14-2011, 11:12 AM	#2239
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Wow amazing build.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-14-2011, 12:51 PM	#2240
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking good Drew! I like the engine cover too. I need to find one.....you have another free one? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-14-2011, 02:13 PM	#2242
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. i think they are about 120 new from chevy...just fyi in case you price a used one you will know how much a new one is __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-14-2011, 08:39 PM	#2244
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Awesome Drew! You are making great progress on him! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-15-2011, 01:02 AM	#2245
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Lookie, Lookie, something came in the mail. It's so much nicer than my little Lincoln welder. I made up these silly little brackets, one to mount the bottom of the hood latch vertical mounting arm and the other one to secure the power steering cooler lines. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

11-15-2011, 01:06 AM	#2246
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Nothing like getting a new toy to play with..... __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537



Register or Log In To remove these advertisements.

11-15-2011, 01:08 AM	#2247
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Good looking welder Drew. Let me know how it works out for you. I'm kinda in the market for a new body work mig. or well at least new to me. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-15-2011, 03:09 AM	#2248
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Nice! Like how you color matched it to the truck __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-15-2011, 08:04 PM	#2250
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. A spectre 90 & 45 to get the fillter closer to tha core surport would make the intake fit in better & hi temp black it.. __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

Register or Log In To remove these advertisements.