A '54 named Busty - Page 91 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Gregski** · 02-03-2022, 03:42 PM

Quote:

Originally Posted by Tx Firefighter

I'm currently 32 pages into it. We are knee deep in a rear main seal and clutch job at this point. It's a page tuner for reals.

This thread did distract me for a bit as I went and learned about Iron Maiden some. Rabbit hole....

Impressive! LOL, strongly suggest investigating any bands with a form of metal in their names

Led Zeppelin
Machine Head
Motorhead
Metallica
Metal Church
TOOL (understandable exception of course)

I think you get the idea

**Gregski** · 02-06-2022, 01:50 PM

well footballers, the new channel material came in and I ain't feelin' it, with just the glass inserted into this material I can barely slide the glass back and forth in it, it is a very snug fit, ie the glass is just TOO darn thick

so then with that new felt material inserted in the actual vent window channel we are pretty much back to square one and the same problem, it fits way too snug for a window that needs to go up an down

**8man** · 02-06-2022, 01:53 PM

I had a similar "snug" problem with the Jeep. Some dry graphite helped.

**Gregski** · 02-06-2022, 01:56 PM

Quote:

Originally Posted by 8man

I had a similar "snug" problem with the Jeep. Some dry graphite helped.

thanks, GOOGLING dry graphite

**Gregski** · 02-06-2022, 08:01 PM

so on to Plan B and JVCC FLOCK-1 Flocking Tape [Non-woven Fabric]: 2 in. x 300 in. (Black), AMAZON $26 bucks

**Gregski** · 02-07-2022, 12:08 PM

And now this: I am literally waiting on the paint to dry in order to glue this tape in the vent window channel.

6DoF · 02-07-2022, 12:19 PM

i know that feeling ... i hate that feeling ...

**Gregski** · 02-07-2022, 12:32 PM

Quote:

Originally Posted by 6DoF

i know that feeling ... i hate that feeling ...

it sure don't dry as fast as on OVERHAULIN' maybe I should'ave used two tone paint, ha ha

something that would last like Johnny and Amber

[what? too soon?]

daveshilling · 02-07-2022, 12:50 PM

Quote:

Originally Posted by Gregski

it sure don't dry as fast as on OVERHAULIN' maybe I should'ave used two tone paint, ha ha

something that would last like Johnny and Amber

[what? too soon?]

Who are Johnny and Amber? Overhauling uses a garage that is heated to 200 degrees, everyone knows that

**Gregski** · 02-10-2022, 11:09 PM

so I am super happy to reportinate that I got the driver side winder reinstalled for the 73rd and final time using just the Flocking Tape on the vent window channel and it goes up and down as Zeus himself intended

I was so pleased that I went out KOHLSing today since it was 75° F, apparently California did not get the memo that it is supposed to be winter

and since you didn't ask, OH MY GAWD the truck runs amaze ballz, and I take ZERO credit for the tuning

Father&son56project · 02-11-2022, 08:39 AM

Good to hear that it's running perfect! I had to look up what "flocking tape" was (it sounded suspiciously like what I say when my tape sticks to something else while I'm trying to install it

). I keep a file in my computer where I list neat ideas that I see on these posts, and that tape has been added!

**8man** · 02-11-2022, 09:12 AM

Good to hear that you got the window installed and it works, but why is the truck all alone in that big ol' parking lot?

6DoF · 02-11-2022, 09:25 AM

that's gota feel good! very nice!

Tempest67 · 02-11-2022, 10:14 AM

You have had some setbacks, but you have persevered and that makes for great satisfaction when complete.

Well Done, the truck looks great.

**youngrodder** · 02-11-2022, 10:49 AM

It's funny how the set backs seem to fade away with each mile you rack up.
Well done, keeping after it.

Marc

**oldman3** · 02-11-2022, 11:16 AM

Looking good...Jim

**Gregski** · 02-11-2022, 11:35 AM

Quote:

Originally Posted by Father&son56project

Good to hear that it's running perfect! I had to look up what "flocking tape" was (it sounded suspiciously like what I say when my tape sticks to something else while I'm trying to install it

). I keep a file in my computer where I list neat ideas that I see on these posts, and that tape has been added!

ha ha, I had that thought when I reread my post and I thought, I hope they don't think it's that kinda tape

and we sound so much alike I have sub folders under most of my directories called "ideas" so the structure looks like this:

Busty

- Exterior
-- Doors
----ideas

-Interior
--Seats
----ideas

and you bet most of the ideas are off of this forum that's why I luv it so much

**Gregski** · 02-11-2022, 11:38 AM

Quote:

Originally Posted by 8man

Good to hear that you got the window installed and it works, but why is the truck all alone in that big ol' parking lot?

thanks, um 'cause she's Busty and needs her elbow room

honestly cause I'm not used to driving with them front fenders sticking out 18" beyond the edge of the front of the hood that I can see from the cabin, I am lucky to still have the sides of my garage as I back out of it each and every time coming within a fraction of an inch of scrapping them fenders I bet

**8man** · 02-11-2022, 11:44 AM

Oh darn, I didn't think of that! Farm Truck is supposed to be for my wife...

**Gregski** · 02-11-2022, 11:49 AM

Quote:

Originally Posted by 8man

Oh darn, I didn't think of that! Farm Truck is supposed to be for my wife...

ah yup, gonna have to go all presidential and such

**Gregski** · 02-16-2022, 11:29 AM

so as I round third base on my way for the final stretch in the third period, here are the final, final things I need to do to have her be 100% complete, complete

1. install the battery hold me down bracket clamp thingie (may require some welding) - ✔

2. install the rear brake metal to rubber lines bracket - ✔

3. re clock the steering column so that the turn signal indicator does not point at my crotch

4. reinforce the B&M floor shifter base plate to prevent it from flexing when shifting - ✔

5. I forget, but I'm sure there's something, ha ha (yeah... it was screwing down the air filter to the intake manifold so it won't fall off cause it's aftermarket crap and the hand cutter clamp doesn't do it justice) - ✔

**youngrodder** · 02-16-2022, 02:44 PM

It's funny. You don't know what you don't know. Driving them definitely helps to identify areas of concern.

I came up with a whole "Winter to do" list. I'm just about complete with it.

Marc

**Gregski** · 02-20-2022, 10:27 AM

Quote:

Originally Posted by youngrodder

It's funny. You don't know what you don't know. Driving them definitely helps to identify areas of concern.

I came up with a whole "Winter to do" list. I'm just about complete with it.

Marc

aint that the truth Marc

sum random pics of me glueanating the door glass channel to the door

**Gregski** · 02-21-2022, 10:15 AM

worked on the juice box clampulator

below was just the trial fitment, I did clean up that hole a bit and made it black

6DoF · 02-21-2022, 12:49 PM

Quote:

Originally Posted by Gregski

the juice box crampulator

02-06-2022, 01:50 PM	#2252
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,847	Re: A '54 named Busty well footballers, the new channel material came in and I ain't feelin' it, with just the glass inserted into this material I can barely slide the glass back and forth in it, it is a very snug fit, ie the glass is just TOO darn thick so then with that new felt material inserted in the actual vent window channel we are pretty much back to square one and the same problem, it fits way too snug for a window that needs to go up an down Attached Images

02-06-2022, 01:53 PM	#2253
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	Re: A '54 named Busty I had a similar "snug" problem with the Jeep. Some dry graphite helped. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

02-06-2022, 08:01 PM	#2255
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,847	Re: A '54 named Busty so on to Plan B and JVCC FLOCK-1 Flocking Tape [Non-woven Fabric]: 2 in. x 300 in. (Black), AMAZON $26 bucks Attached Images

02-07-2022, 12:08 PM	#2256
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,847	Re: A '54 named Busty And now this: I am literally waiting on the paint to dry in order to glue this tape in the vent window channel. Attached Images

02-07-2022, 12:19 PM	#2257
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,088	Re: A '54 named Busty i know that feeling ... i hate that feeling ...

02-10-2022, 11:09 PM	#2260
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,847	Re: A '54 named Busty so I am super happy to reportinate that I got the driver side winder reinstalled for the 73rd and final time using just the Flocking Tape on the vent window channel and it goes up and down as Zeus himself intended I was so pleased that I went out KOHLSing today since it was 75° F, apparently California did not get the memo that it is supposed to be winter and since you didn't ask, OH MY GAWD the truck runs amaze ballz, and I take ZERO credit for the tuning Attached Images Last edited by Gregski; 02-10-2022 at 11:19 PM.

02-11-2022, 08:39 AM	#2261
Father&son56project Registered User Join Date: May 2009 Location: Grey County Ontario Posts: 207	Re: A '54 named Busty Good to hear that it's running perfect! I had to look up what "flocking tape" was (it sounded suspiciously like what I say when my tape sticks to something else while I'm trying to install it ). I keep a file in my computer where I list neat ideas that I see on these posts, and that tape has been added!

02-11-2022, 09:12 AM	#2262
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	Re: A '54 named Busty Good to hear that you got the window installed and it works, but why is the truck all alone in that big ol' parking lot? __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

02-11-2022, 09:25 AM	#2263
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,088	Re: A '54 named Busty that's gota feel good! very nice!

02-11-2022, 10:14 AM	#2264
Tempest67 Registered User Join Date: Sep 2018 Location: Ontario Posts: 837	Re: A '54 named Busty You have had some setbacks, but you have persevered and that makes for great satisfaction when complete. Well Done, the truck looks great. __________________ https://67-72chevytrucks.com/vboard/...=797726&page=3 http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781

02-11-2022, 10:49 AM	#2265
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,773	Re: A '54 named Busty It's funny how the set backs seem to fade away with each mile you rack up. Well done, keeping after it. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

02-11-2022, 11:16 AM	#2266
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: A '54 named Busty Looking good...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-11-2022, 11:44 AM	#2269
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	Re: A '54 named Busty Oh darn, I didn't think of that! Farm Truck is supposed to be for my wife... __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

02-16-2022, 11:29 AM	#2271
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,847	Re: A '54 named Busty so as I round third base on my way for the final stretch in the third period, here are the final, final things I need to do to have her be 100% complete, complete 1. install the battery hold me down bracket clamp thingie (may require some welding) - ✔ 2. install the rear brake metal to rubber lines bracket - ✔ 3. re clock the steering column so that the turn signal indicator does not point at my crotch 4. reinforce the B&M floor shifter base plate to prevent it from flexing when shifting - ✔ 5. I forget, but I'm sure there's something, ha ha (yeah... it was screwing down the air filter to the intake manifold so it won't fall off cause it's aftermarket crap and the hand cutter clamp doesn't do it justice) - ✔ Last edited by Gregski; 02-21-2022 at 09:13 PM.

02-16-2022, 02:44 PM	#2272
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,773	Re: A '54 named Busty It's funny. You don't know what you don't know. Driving them definitely helps to identify areas of concern. I came up with a whole "Winter to do" list. I'm just about complete with it. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857



Register or Log In To remove these advertisements.

02-21-2022, 10:15 AM	#2274
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,847	Re: A '54 named Busty worked on the juice box clampulator below was just the trial fitment, I did clean up that hole a bit and made it black Attached Images Last edited by Gregski; 02-21-2022 at 01:20 PM.

Register or Log In To remove these advertisements.