What did you do to your truck today? - Page 91 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

onequickchevy · 12-15-2010, 07:49 PM

Lakeroadster,

What brand filler is that? I prefer a lightweight evercoat product, it sands so easy compared to others that is rock hard. They also make a finish product called icing that is applied over primer ( or filler, it just will not stick to metal) that makes finish bodywork and blocking a breeze. Well, in comparison anyway....

*lakeroadster* · 12-15-2010, 08:26 PM

Quote:

Originally Posted by onequickchevy

Lakeroadster,

What brand filler is that?

3M Bondo Professional Gold Premium Auto Body Filler, bought it at Walmart.

http://solutions.3m.com/wps/portal/3...gl3S2SB1HGQTbl

TwoFiftyShifter · 12-15-2010, 08:58 PM

The camaro dash is killer man... my father has a 67 Camaro and I told him about that mod and he HAD to see it.... good work.

old cruiser · 12-17-2010, 01:44 AM

After rebuilding 230 and refitted it with new clutch, started it today ran in camshaft and adjusted valve clearance, very happy now I've gotta sort out why brakes have failed. New shoes and rubber lines worked a treat for a few weeks now all of a sudden pedal goes to floor.

agent orange · 12-17-2010, 04:46 AM

Started sanding the truck this week

agent orange · 12-17-2010, 04:49 AM

Started sanding the truck this week

pope · 12-17-2010, 12:18 PM

I stared at pictures of it on my computer wishing I wasn't in Iraq!!!

REDNOSE65 · 12-17-2010, 12:39 PM

I did some sanding on Red Nose yesterday. Hope to buff it out soon!!!

jbgroby · 12-17-2010, 02:01 PM

Got the entire dash Painted. It had to be painted first so it could be masked off when the rest of the cab gets done. The grey top looks killer INHO.

Hollywood64 · 12-17-2010, 02:17 PM

Started my flat black RC paint job!

markeb01 · 12-17-2010, 02:19 PM

Quote:

Originally Posted by jbgroby

Got the entire dash Painted. It had to be painted first so it could be masked off when the rest of the cab gets done. The grey top looks killer INHO.

That looks both beautiful and authentic. Great job.

bobcostas · 12-17-2010, 02:28 PM

Quote:

Originally Posted by jbgroby

Got the entire dash Painted. It had to be painted first so it could be masked off when the rest of the cab gets done. The grey top looks killer INHO.

DUDE. That does look killer. Very nice job.

jbgroby · 12-17-2010, 03:51 PM

Thanks Guys, Its getting real close, got that itch way down low to get her finished FAST so I can get the wiring and other goodies in. I'm bringing the seat to be covered next week, the grey on the seat cover matched he dash top nicely.

kiknrocks · 12-17-2010, 09:35 PM

What color are you going to run on her, when you're done sanding?

Quote:

Originally Posted by agent orange

Started sanding the truck this week

willyp · 12-18-2010, 12:39 AM

installed a new hood/radiator seal then new defroster hoses. what a royal PITA!

agent orange · 12-18-2010, 01:10 AM

Quote:

Originally Posted by kiknrocks

What color are you going to run on her, when you're done sanding?

You know it hasn't cross my mind yet. I picked it up few weeks ago from some young kid down the block for 900 bucks. it was flat black. My wife likes the color blue, but leaning towards omaha orange or hugger orange. For now its a daily driver while i work on it.

steverino66 · 12-18-2010, 11:53 PM

This is a great thread - I'll play today: installed inside bed latches for tail gate so no more ugly chains (still have to cut off old chain latches, weld holes etc.), and finally finished cleanup/priming on replacement nose pieces to go on later.

TwoFiftyShifter · 12-19-2010, 12:49 AM

I worked on my bed. Grinded the old rusty strips off, started sanding and priming the bed and will put new strips on tomorrow. Not a whole lot.

neto · 12-20-2010, 11:53 PM

Put the gas tank in. 19 gallons from CPP. Fits good but a pain to drill the holes.

old cruiser · 12-22-2010, 05:43 AM

Made myself a pressure bleeder for my brakes, now my 64 has got a pedal that doesn,t go to the floor

kieth · 12-22-2010, 07:19 PM

Here is link to my 66 gmc build, it show all pictures, before teardown and to date. Right now we are waiting on a new belt tensioner, spark plug wires, plugs, and for paint to dry so we can finish the accessory drive . also just got the new e barke parts for the passenger side so we can install that tomorrow. Kieth

http://kieth.smugmug.com/Trucks/66-G...67555158_RNLWE

*lakeroadster* · 12-23-2010, 09:30 PM

Sealed holes in cab floor, installed sound deadener (from The Truck Shop) and did some more body work on the Camaro dash.

kalirodding · 12-23-2010, 10:47 PM

We went to the car wash, since the sun was out and is wasn't raining. Met a guy there who had a 65 Step. Pretty nice truck, except the camper shell.

andyh1956 · 12-23-2010, 11:43 PM

the other day i rode over to alabama & picked up the 455 buick that i bought while i was in afghanistan. today i checked and it was ALMOST locked up. a half a can of pb & lots of rocking back & forth & now she turns just fine. will see what she looks like with the heads off later but for now this will have to do. turned out to be a '72 single exhaust, prolly outta an electra or something. it should push the old '66 great!
andy

lownslow62 · 12-23-2010, 11:53 PM

swooped up my york compressor, bags, valves, and plasma'd my bridge out of some 1/4"

12-15-2010, 07:49 PM	#2251
onequickchevy Registered User Join Date: Sep 2009 Location: Marianna, Florida Posts: 339	Re: What did you do to your truck today? Lakeroadster, What brand filler is that? I prefer a lightweight evercoat product, it sands so easy compared to others that is rock hard. They also make a finish product called icing that is applied over primer ( or filler, it just will not stick to metal) that makes finish bodywork and blocking a breeze. Well, in comparison anyway.... __________________ Slowly but surely getting it done.

12-15-2010, 08:58 PM	#2253
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: What did you do to your truck today? The camaro dash is killer man... my father has a 67 Camaro and I told him about that mod and he HAD to see it.... good work. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

12-17-2010, 01:44 AM	#2254
old cruiser Registered User Join Date: Mar 2010 Location: Camperdown Vic Australia Posts: 230	Re: What did you do to your truck today? After rebuilding 230 and refitted it with new clutch, started it today ran in camshaft and adjusted valve clearance, very happy now I've gotta sort out why brakes have failed. New shoes and rubber lines worked a treat for a few weeks now all of a sudden pedal goes to floor.

12-17-2010, 04:46 AM	#2255
agent orange Registered User Join Date: Jan 2008 Location: Stockton Ca Posts: 63	Re: What did you do to your truck today? Started sanding the truck this week __________________ 1966 GMC Current project 1966 Chevy C10 Sold 1985 C10 Sold 1968 El camino Sold 1954 Ford Anglia Sold 1973 GMC Suburban Sold 1974 Chevy C10 Sold Last edited by agent orange; 12-17-2010 at 04:50 AM.

12-17-2010, 04:49 AM	#2256
agent orange Registered User Join Date: Jan 2008 Location: Stockton Ca Posts: 63	Re: What did you do to your truck today? Started sanding the truck this week __________________ 1966 GMC Current project 1966 Chevy C10 Sold 1985 C10 Sold 1968 El camino Sold 1954 Ford Anglia Sold 1973 GMC Suburban Sold 1974 Chevy C10 Sold

12-17-2010, 12:18 PM	#2257
pope Registered User Join Date: Dec 2010 Location: Belgrade, Mt Posts: 130	Re: What did you do to your truck today? I stared at pictures of it on my computer wishing I wasn't in Iraq!!!

12-17-2010, 12:39 PM	#2258
REDNOSE65 Registered User Join Date: Dec 2009 Location: DALLAS, TEXAS Posts: 1,908	Re: What did you do to your truck today? I did some sanding on Red Nose yesterday. Hope to buff it out soon!!! __________________ RED NOSE '65 LOS HITTERS C.C DALLAS, TEXAS The making of a Red Nose... http://www.67-72chevytrucks.com/vboa...d.php?t=396518 Last edited by REDNOSE65; 12-17-2010 at 12:50 PM.

12-17-2010, 02:01 PM	#2259
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: What did you do to your truck today? Got the entire dash Painted. It had to be painted first so it could be masked off when the rest of the cab gets done. The grey top looks killer INHO. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829 Last edited by jbgroby; 12-17-2010 at 02:03 PM.

12-17-2010, 02:17 PM	#2260
Hollywood64 Registered User Join Date: Nov 2010 Location: Clearwater, Florida Posts: 8	Re: What did you do to your truck today? Started my flat black RC paint job!

12-17-2010, 03:51 PM	#2263
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: What did you do to your truck today? Thanks Guys, Its getting real close, got that itch way down low to get her finished FAST so I can get the wiring and other goodies in. I'm bringing the seat to be covered next week, the grey on the seat cover matched he dash top nicely. __________________ http://s1299.photobucket.com/user/jb...23904108567829

12-18-2010, 12:39 AM	#2265
willyp Registered User Join Date: Nov 2008 Location: Houston TX Posts: 362	Re: What did you do to your truck today? installed a new hood/radiator seal then new defroster hoses. what a royal PITA! __________________ The price of cool aint cheap.

12-18-2010, 11:53 PM	#2267
steverino66 Registered User Join Date: Oct 2005 Location: oklahoma Posts: 663	Re: What did you do to your truck today? This is a great thread - I'll play today: installed inside bed latches for tail gate so no more ugly chains (still have to cut off old chain latches, weld holes etc.), and finally finished cleanup/priming on replacement nose pieces to go on later. Attached Images

12-19-2010, 12:49 AM	#2268
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: What did you do to your truck today? I worked on my bed. Grinded the old rusty strips off, started sanding and priming the bed and will put new strips on tomorrow. Not a whole lot. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

12-20-2010, 11:53 PM	#2269
neto Registered User Join Date: Jan 2007 Location: Madera, California Posts: 291	Re: What did you do to your truck today? Put the gas tank in. 19 gallons from CPP. Fits good but a pain to drill the holes. Attached Images

12-22-2010, 05:43 AM	#2270
old cruiser Registered User Join Date: Mar 2010 Location: Camperdown Vic Australia Posts: 230	Re: What did you do to your truck today? Made myself a pressure bleeder for my brakes, now my 64 has got a pedal that doesn,t go to the floor



Register or Log In To remove these advertisements.

12-22-2010, 07:19 PM	#2271
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: What did you do to your truck today? Here is link to my 66 gmc build, it show all pictures, before teardown and to date. Right now we are waiting on a new belt tensioner, spark plug wires, plugs, and for paint to dry so we can finish the accessory drive . also just got the new e barke parts for the passenger side so we can install that tomorrow. Kieth http://kieth.smugmug.com/Trucks/66-G...67555158_RNLWE

12-23-2010, 09:30 PM	#2272
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: What did you do to your truck today? Sealed holes in cab floor, installed sound deadener (from The Truck Shop) and did some more body work on the Camaro dash. Attached Images

12-23-2010, 10:47 PM	#2273
kalirodding CLASSIX Truck Club Join Date: Oct 2009 Location: Lodi Ca Posts: 318	Re: What did you do to your truck today? We went to the car wash, since the sun was out and is wasn't raining. Met a guy there who had a 65 Step. Pretty nice truck, except the camper shell.

12-23-2010, 11:43 PM	#2274
andyh1956 Registered User Join Date: Mar 2010 Location: thomastown mississippi Posts: 1,261	Re: What did you do to your truck today? the other day i rode over to alabama & picked up the 455 buick that i bought while i was in afghanistan. today i checked and it was ALMOST locked up. a half a can of pb & lots of rocking back & forth & now she turns just fine. will see what she looks like with the heads off later but for now this will have to do. turned out to be a '72 single exhaust, prolly outta an electra or something. it should push the old '66 great! andy

12-23-2010, 11:53 PM	#2275
lownslow62 Registered User Join Date: Aug 2010 Location: Phoenix Posts: 14	Re: What did you do to your truck today? swooped up my york compressor, bags, valves, and plasma'd my bridge out of some 1/4"

Register or Log In To remove these advertisements.