What Did You Do With Your Truck Today ? - Page 92 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OrrieG · 05-22-2013, 02:05 PM

Not reading the original post, I would say probably having the cab and radiator support in place. That will let you place it front to back so you do not hit the firewall (or know where to modify) and check radiator clearance. Side to side depends on header configuration and clearance to steering stuff. Up and down, upper clearance is usually not a problem except where the bellhousing hits the firewall/floorpan. Lower depends on pan location. Set the intake manifold carb mount level with the frame, that puts the engine/trans back down about 3-4 degrees.

1-ton of fun · 05-22-2013, 02:56 PM

i meant more like keeping the mounts lined up right with each other. i guess i can just build a jig for that

1-ton of fun · 05-22-2013, 03:00 PM

i guess i need to order the raditator and dizzy to know how much it needs to/can move back

OrrieG · 05-22-2013, 05:36 PM

Quote:

Originally Posted by 1-ton of fun

i meant more like keeping the mounts lined up right with each other. i guess i can just build a jig for that

The frame has alignment holes left over from original construction on the line. I think the rails were set in to a pinned jig, then the crossmembers placed and riveted. Frame shops use the same holes for straightening. Make sure your frame is square (they do move) then pick two points on each side (shackle rivet, body mount hole center, alignment hole) and use that for reference. I would use a block similar to yours to check before final welding.

Daze57 · 05-22-2013, 07:21 PM

http://youtu.be/yJ4hmKGKjbM

guys !!!! i know we are all truck and car fans - but i think we may have some competition for fans of a v v cool car/truck

enjoy

skymangs · 05-23-2013, 11:40 AM

Drove mine to work today.

mknittle · 05-23-2013, 07:39 PM

Quote:

Originally Posted by skymangs

Drove mine to work today.

blue57 · 05-24-2013, 12:30 AM

I got my windshield wipers all mounted back up with the new electric motor from brothers. Also got the tailgate mounted with the Mar-k trunions, hidden hinges and almost have the latches in.

mknittle · 05-24-2013, 10:26 AM

Quote:

Originally Posted by Daze57

http://youtu.be/yJ4hmKGKjbM

guys !!!! i know we are all truck and car fans - but i think we may have some competition for fans of a v v cool car/truck

enjoy

That is funny! the Benny Hill theme is perfect!

OrrieG · 05-24-2013, 01:16 PM

bent lower door hinge (helped a little, may need more) and replaced the door regulator rollers. Hope my door ws arrives today so I can get the doors done this weekend, if not, will finish up the welding on the gas door.

Bubba54 · 05-24-2013, 09:35 PM

I did a little rust repair on the passenger side rocker panel. I was able to do a little recycling in that the patch came from the drivers side rocker panel. The driver side had both ends pretty much gone, but the lower middle was in good shape.
Name: Rocker_1.jpg
Views: 395
Size: 45.6 KB

Name: Rocker_1.jpg
Views: 395
Size: 45.6 KB

Name: Rocker_2.jpg
Views: 401
Size: 52.5 KB

Name: Rocker_3.jpg
Views: 400
Size: 43.3 KB

Name: Rocler_4.jpg
Views: 409
Size: 47.1 KB

Name: Rocker_5.jpg
Views: 397
Size: 45.1 KB

FarmerSid · 05-25-2013, 07:52 AM

Nice repair! How do you like those panel clamps? I find the gap a bit too big.

Bubba54 · 05-25-2013, 07:59 AM

They work well. What i do is fit the panel tight and mark where the clamps go, then i open that spot up a little more. If the seam is ever too tight i run my body saw blade between tacks to get a little gap.

Bubba54 · 05-25-2013, 08:15 AM

Quote:

Originally Posted by FarmerSid

Nice repair! How do you like those panel clamps? I find the gap a bit too big.

Another note about the clamps. Keep an eye on the the alignment. the clamps are not always made square.

As the clamp on the right.
Name: clamps 004.jpg
Views: 375
Size: 38.9 KB

Name: clamps 004.jpg
Views: 375
Size: 38.9 KB

Daze57 · 05-25-2013, 12:07 PM

are these clamps american made? if not - it figures --- if so - it figures

sorry folks - i am concernened about quality control

especially when it come to parts for these old trucks - we try to make somethin nice
but ''newer' parts wont let us

lowdownstar · 05-25-2013, 01:39 PM

nice repair no body work needed !

Ray

Atommik · 05-25-2013, 10:53 PM

I bought my truck almost exactly 2 years ago...today I fired it up for the first time!!

http://www.youtube.com/watch?v=mf9fe...ature=youtu.be

Coach529 · 05-25-2013, 11:24 PM

Drove it.....finally!!

**arturo7** · 05-26-2013, 12:54 AM

Installed the front axle, assembled the rear.

mknittle · 05-26-2013, 09:28 AM

Quote:

Originally Posted by Atommik

I bought my truck almost exactly 2 years ago...today I fired it up for the first time!!

http://www.youtube.com/watch?v=mf9fe...ature=youtu.be

good news! that is one nice truck!

Bubba54 · 05-26-2013, 09:31 AM

Quote:

Originally Posted by lowdownstar

nice repair no body work needed !

Ray

Thanks, Thats what I always shoot for, but doesnt always come out that way. I just keep trying.

Bubba54 · 05-26-2013, 09:35 AM

Quote:

Originally Posted by Daze57

are these clamps american made? if not - it figures --- if so - it figures

sorry folks - i am concernened about quality control

especially when it come to parts for these old trucks - we try to make somethin nice
but ''newer' parts wont let us

Some came from Eastwood some from Harbor Frieght. Quality is about the same, big difference is the price.

lowdownstar · 05-26-2013, 09:38 AM

well i had the best day, i spent some time in the morning block sanding my rear fender getting it ready for paint and then spent the night watching my oldest son get married to a perfect young lady who i think is an angel. great day....

Ray

mknittle · 05-26-2013, 10:03 AM

Quote:

Originally Posted by lowdownstar

well i had the best day, i spent some time in the morning block sanding my rear fender getting it ready for paint and then spent the night watching my oldest son get married to a perfect young lady who i think is an angel. great day....

Ray

Congratulations Ray!

dubie · 05-26-2013, 11:32 AM

Quote:

Originally Posted by Coach529

Drove it.....finally!!

Sweet Jesus that turned out slick! How was the maiden voyage? What a sweet ride
Posted via Mobile Device

05-22-2013, 02:05 PM	#2276
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: What Did You Do With Your Truck Today ? Not reading the original post, I would say probably having the cab and radiator support in place. That will let you place it front to back so you do not hit the firewall (or know where to modify) and check radiator clearance. Side to side depends on header configuration and clearance to steering stuff. Up and down, upper clearance is usually not a problem except where the bellhousing hits the firewall/floorpan. Lower depends on pan location. Set the intake manifold carb mount level with the frame, that puts the engine/trans back down about 3-4 degrees. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

05-22-2013, 02:56 PM	#2277
1-ton of fun polishing a turd Join Date: Dec 2004 Location: houston, tx Posts: 674	Re: What Did You Do With Your Truck Today ? i meant more like keeping the mounts lined up right with each other. i guess i can just build a jig for that __________________ 59 chevy apache 31 4x4 - my project: http://67-72chevytrucks.com/vboard/s....php?p=8668512 53 buick special - straight 8 sled - blow through turbo 47 gmc - flatbed hot rod build 99 ford econoline e350 - 4x4 converted family roadtrip/overlanding rig AKA 'Monstervan' AKA 'Daddy-Van'

05-22-2013, 03:00 PM	#2278
1-ton of fun polishing a turd Join Date: Dec 2004 Location: houston, tx Posts: 674	Re: What Did You Do With Your Truck Today ? i guess i need to order the raditator and dizzy to know how much it needs to/can move back __________________ 59 chevy apache 31 4x4 - my project: http://67-72chevytrucks.com/vboard/s....php?p=8668512 53 buick special - straight 8 sled - blow through turbo 47 gmc - flatbed hot rod build 99 ford econoline e350 - 4x4 converted family roadtrip/overlanding rig AKA 'Monstervan' AKA 'Daddy-Van'

05-22-2013, 07:21 PM	#2280
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: What Did You Do With Your Truck Today ? http://youtu.be/yJ4hmKGKjbM guys !!!! i know we are all truck and car fans - but i think we may have some competition for fans of a v v cool car/truck enjoy

05-23-2013, 11:40 AM	#2281
skymangs Registered User Join Date: Apr 2010 Location: Warrensburg, MO Posts: 2,690	Re: What Did You Do With Your Truck Today ? Drove mine to work today. __________________ www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475

05-24-2013, 12:30 AM	#2283
blue57 Registered User Join Date: Nov 2011 Location: Victorville, CA Posts: 469	Re: What Did You Do With Your Truck Today ? I got my windshield wipers all mounted back up with the new electric motor from brothers. Also got the tailgate mounted with the Mar-k trunions, hidden hinges and almost have the latches in. __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=522711

05-24-2013, 01:16 PM	#2285
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: What Did You Do With Your Truck Today ? bent lower door hinge (helped a little, may need more) and replaced the door regulator rollers. Hope my door ws arrives today so I can get the doors done this weekend, if not, will finish up the welding on the gas door. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

05-24-2013, 09:35 PM	#2286
Bubba54 Registered User Join Date: Apr 2013 Location: St. Peters, Missouri Posts: 155	Re: What Did You Do With Your Truck Today ? I did a little rust repair on the passenger side rocker panel. I was able to do a little recycling in that the patch came from the drivers side rocker panel. The driver side had both ends pretty much gone, but the lower middle was in good shape.

05-25-2013, 07:52 AM	#2287
FarmerSid Registered User Join Date: Jan 2012 Location: Eastern Ontario, Canada Posts: 1,041	Re: What Did You Do With Your Truck Today ? Nice repair! How do you like those panel clamps? I find the gap a bit too big.

05-25-2013, 07:59 AM	#2288
Bubba54 Registered User Join Date: Apr 2013 Location: St. Peters, Missouri Posts: 155	Re: What Did You Do With Your Truck Today ? They work well. What i do is fit the panel tight and mark where the clamps go, then i open that spot up a little more. If the seam is ever too tight i run my body saw blade between tacks to get a little gap.

05-25-2013, 12:07 PM	#2290
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: What Did You Do With Your Truck Today ? are these clamps american made? if not - it figures --- if so - it figures sorry folks - i am concernened about quality control especially when it come to parts for these old trucks - we try to make somethin nice but ''newer' parts wont let us

05-25-2013, 01:39 PM	#2291
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: What Did You Do With Your Truck Today ? nice repair no body work needed ! Ray

05-25-2013, 10:53 PM	#2292
Atommik Registered User Join Date: Sep 2011 Location: Golden Valley,MN Posts: 639	Re: What Did You Do With Your Truck Today ? I bought my truck almost exactly 2 years ago...today I fired it up for the first time!! http://www.youtube.com/watch?v=mf9fe...ature=youtu.be __________________ My build http://67-72chevytrucks.com/vboard/s...d.php?t=495795

05-25-2013, 11:24 PM	#2293
Coach529 Registered User Join Date: Nov 2012 Location: Post Falls, Idaho Posts: 1,757	Re: What Did You Do With Your Truck Today ? Drove it.....finally!! __________________ 1949 Chevy 3600 "Adventures of Henry" http://smu.gs/QOlhWY

05-26-2013, 12:54 AM	#2294
arturo7 Senior Member Join Date: Jul 2012 Location: huntington beach Posts: 845	Re: What Did You Do With Your Truck Today ? Installed the front axle, assembled the rear. __________________ ever forward build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=542073



Register or Log In To remove these advertisements.

05-26-2013, 09:38 AM	#2298
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 824	Re: What Did You Do With Your Truck Today ? well i had the best day, i spent some time in the morning block sanding my rear fender getting it ready for paint and then spent the night watching my oldest son get married to a perfect young lady who i think is an angel. great day.... Ray

Register or Log In To remove these advertisements.