The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2018, 05:58 PM   #2276
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by Michel View Post
Took the truck out of the garage, and in the street. Close the garage door and jump in the truck, switch on the lights and... no lights! Switch off, switch on, still no lights on the front! And here the great idea! press the foot switch and then lights on !!!!!!
Bad dimmer switch?
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 11-09-2018, 09:51 PM   #2277
Dyslexic Dog
Registered User
 
Join Date: Jul 2018
Location: GR MI
Posts: 57
Re: What did you do with your truck today, Part 3

Just got back from a vacation in Utah. Visited Zion and Bryce. Also spent time looking in the backyard along the road. Found a collection in Glendale UT that had a bunch of classic Detroit iron.
Dyslexic Dog is offline   Reply With Quote
Old 11-10-2018, 12:52 AM   #2278
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

Didn't get crap done tonight, put away some parts is about it, but I was out there for my five minutes. I did put a photo I had printed on my truck that was photo shopped for me of my truck done! That will be a little more of a spark when I see it, I can use all the sparks I can get.

Brian
Attached Images
 
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-10-2018, 02:14 AM   #2279
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by Dyslexic Dog View Post
Just got back from a vacation in Utah. Visited Zion and Bryce. Also spent time looking in the backyard along the road. Found a collection in Glendale UT that had a bunch of classic Detroit iron.
Zion is so surreal, one of my favorite places!
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 11-10-2018, 02:21 AM   #2280
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: What did you do with your truck today, Part 3

Toured around to show my truck off to a couple of friends, one who owns a '23 T-bucket and the other a '51 Ford PU. I'm pretty happy with the stance.

I ordered window channel kits, and I have an appointment to get the exhaust done next week.
Attached Images
 
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 11-10-2018, 12:16 PM   #2281
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

Muffler shmuffler who needs um. LOL

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-10-2018, 02:55 PM   #2282
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

Got the fenders primed, WHOO HOOOO! Off to the Goodguys.

Brian
Attached Images
 
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-11-2018, 04:19 AM   #2283
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by MARTINSR View Post
Got the fenders primed, WHOO HOOOO! Off to the Goodguys.

Brian
Your primer looks better than most people's paint. You'd almost think you did that for a living or something...
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 11-11-2018, 11:50 AM   #2284
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by MiraclePieCo View Post
Your primer looks better than most people's paint. You'd almost think you did that for a living or something...
You know what's funny, I DID it for a living but haven't primed at work for 20 years!

One thing that blows me away is how fast it becomes old hat. The first time I was priming one of these parts and I knew I was out of primer before it stopped spraying, buy the weight of the gun, that blew my mind, I had forgotten that would even happen.

I put a bunch of stuff for sale on eBay hopefully will sell it all so I can get my frame powdercoated without having to dip into the family money. That's one thing I have tried to do, sell off stuff I don't need to pay for stuff on my truck. I found out yesterday that my NOS 56 California license plates are worth about $500! WHOOOO HOOOO!
And my "Club plaques" I have had up on my garage wall for 25 years, just another thing to move when I go to Idaho, might as well sell them now and pay for something on the truck!

Brian
Attached Images
  
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-11-2018, 06:07 PM   #2285
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: What did you do with your truck today, Part 3

Installed the check engine light, installed and arranged a bunch of the stuff in and around the dash. Ran my A/C ducting aND found a GM key that does not go to my truck.
Attached Images
  
__________________
1959 Chevy Apache 3100/ 283 TBI / 4L60E
My YouTube:
https://www.youtube.com/mikebtte
mikebte is offline   Reply With Quote
Old 11-11-2018, 06:08 PM   #2286
mikebte
Registered User
 
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by MARTINSR View Post
You know what's funny, I DID it for a living but haven't primed at work for 20 years!

One thing that blows me away is how fast it becomes old hat. The first time I was priming one of these parts and I knew I was out of primer before it stopped spraying, buy the weight of the gun, that blew my mind, I had forgotten that would even happen.

I put a bunch of stuff for sale on eBay hopefully will sell it all so I can get my frame powdercoated without having to dip into the family money. That's one thing I have tried to do, sell off stuff I don't need to pay for stuff on my truck. I found out yesterday that my NOS 56 California license plates are worth about $500! WHOOOO HOOOO!
And my "Club plaques" I have had up on my garage wall for 25 years, just another thing to move when I go to Idaho, might as well sell them now and pay for something on the truck!

Brian
Love the old plaques, super cool. Plates are worth there weight in gold. Must have for a classic car owner.
mikebte is offline   Reply With Quote
Old 11-11-2018, 07:29 PM   #2287
svr
Registered User
 
svr's Avatar
 
Join Date: Feb 2016
Location: Othello washington
Posts: 400
Re: What did you do with your truck today, Part 3

Plan was to warm up the shop and reprime some areas that i sanded through the primer. Mother nature didnt cooperate. Temps this morning were 23 and foggy, not the 34 and clear so the air would warm up to 50'ish so my heat source could get things warmed up and keep them there, it made 28 is as warm as it got today. Nothing happened
__________________
57 short box, 235, T5, C4
http://67-72chevytrucks.com/vboard/s...d.php?t=739132
svr is offline   Reply With Quote
Old 11-11-2018, 08:19 PM   #2288
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

I stripped the header panel on the bed today, I am BEAT, BEAT!

I had straightened both sides, the entire thing was covered, both sides, with bondo. Now mind you, maybe an 1/8" tops, it's not a lot, but over about 10 square feet! HOLY CRAP that was a lot of work.

I have to REALLY re-think stripping the bed sides, they are the same, I have to REALLY re-think this. I don't know what the heck the difference was, the fenders stripped pretty easy with paint stripper, bondo and all. But this part, I don't get it, the stuff laughed at the paint stripper!

Yep, I have to re-think this whole bed, crap.

Brian
Attached Images
 
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-11-2018, 08:35 PM   #2289
DransportGarage
Registered User
 
DransportGarage's Avatar
 
Join Date: Feb 2010
Location: Lebanon, Ohio
Posts: 1,359
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by MARTINSR View Post
You know what's funny, I DID it for a living but haven't primed at work for 20 years!

One thing that blows me away is how fast it becomes old hat. The first time I was priming one of these parts and I knew I was out of primer before it stopped spraying, buy the weight of the gun, that blew my mind, I had forgotten that would even happen.

I put a bunch of stuff for sale on eBay hopefully will sell it all so I can get my frame powdercoated without having to dip into the family money. That's one thing I have tried to do, sell off stuff I don't need to pay for stuff on my truck. I found out yesterday that my NOS 56 California license plates are worth about $500! WHOOOO HOOOO!
And my "Club plaques" I have had up on my garage wall for 25 years, just another thing to move when I go to Idaho, might as well sell them now and pay for something on the truck!

Brian
You got some neat stuff !!!
__________________
Bob
"It won't take long and it won't cost much."
'55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed)
Bob's Retirement Build - My 55 TF
Bob's 700R4 Build (how-to)
DransportGarage is offline   Reply With Quote
Old 11-11-2018, 08:39 PM   #2290
DransportGarage
Registered User
 
DransportGarage's Avatar
 
Join Date: Feb 2010
Location: Lebanon, Ohio
Posts: 1,359
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by MARTINSR View Post
I stripped the header panel on the bed today, I am BEAT, BEAT!

I had straightened both sides, the entire thing was covered, both sides, with bondo. Now mind you, maybe an 1/8" tops, it's not a lot, but over about 10 square feet! HOLY CRAP that was a lot of work.

I have to REALLY re-think stripping the bed sides, they are the same, I have to REALLY re-think this. I don't know what the heck the difference was, the fenders stripped pretty easy with paint stripper, bondo and all. But this part, I don't get it, the stuff laughed at the paint stripper!

Yep, I have to re-think this whole bed, crap.

Brian
I've started factoring in how long I'll probably live before I do tasks like that... (but I usually do what's best for the truck.)
__________________
Bob
"It won't take long and it won't cost much."
'55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed)
Bob's Retirement Build - My 55 TF
Bob's 700R4 Build (how-to)
DransportGarage is offline   Reply With Quote
Old 11-11-2018, 08:47 PM   #2291
evilokc
Registered User
 
Join Date: Mar 2013
Location: albuquerque New Mexico
Posts: 522
Re: What did you do with your truck today, Part 3

drove it all weekend. the cold weather doesn't seem to bother it at all. doesn't miss a lick. tonight im going to try and get the hood sitting back on correctly and im having a door hinge issue. started running some beats to get my settings right for my firewall patch panel. got a few nice ones and then ran out of gas. figures right. I will get some gas tomorrow and continue
evilokc is offline   Reply With Quote
Old 11-11-2018, 09:04 PM   #2292
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by DransportGarage View Post
I've started factoring in how long I'll probably live before I do tasks like that... (but I usually do what's best for the truck.)
I am torn, the bed sides look pretty good with just a little rust here and there. But it's all lacquer like the panel I did today. And lacquer doesn't protect that well, so this from panel did have some rust here and there. I plan on having it sand blasted too, even though I stripped it because there is a bunch that still needs to be blasted. I may do it here but it SUCKS.

I have even tossed around the idea of buying new, and that SUCKS because this is my bed, it looks real nice, if I left what was there and just fixed the rust here and there sand blasting and what not and then sand everything down thinner with 120 and epoxy primed the whole thing. It would save me a LOT of work over stripping it.

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-11-2018, 09:22 PM   #2293
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

I just looked up the cost and I could have a whole bed for about $950 DAAAAAAMN that's hard to turn down! CRAP

The sand blasting of this stuff if I were to strip it would be around $300 at least. So now we are talking $650 or so with no work, where as the bed would be probably at least 20-40 hours to get it paint ready. That's a hell of a lot of five minutes a day!

CRAP

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-11-2018, 10:09 PM   #2294
DransportGarage
Registered User
 
DransportGarage's Avatar
 
Join Date: Feb 2010
Location: Lebanon, Ohio
Posts: 1,359
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by MARTINSR View Post
I am torn, the bed sides look pretty good with just a little rust here and there. But it's all lacquer like the panel I did today. And lacquer doesn't protect that well, so this from panel did have some rust here and there. I plan on having it sand blasted too, even though I stripped it because there is a bunch that still needs to be blasted. I may do it here but it SUCKS.

I have even tossed around the idea of buying new, and that SUCKS because this is my bed, it looks real nice, if I left what was there and just fixed the rust here and there sand blasting and what not and then sand everything down thinner with 120 and epoxy primed the whole thing. It would save me a LOT of work over stripping it.

Brian
As I began to read your post I thought, I'd block it down til I hit metal, one coat hi solids primer, guide coat & block w/ P400, seal and shoot color. I shot over the original nitrocellulose lacquer with acrylic lacquer on my '55 Chevy sedan in 1981, and it looks GREAT today! Seriously. (Attached pic taken in 2011 when I did the 4 wheel disc brake conversion. It's an L.A. car w/ 61,000 miles on it - best sedan in Ohio! Many trophies, w/ triple trophies at the CCC regional in 1982...)
Attached Images
  
__________________
Bob
"It won't take long and it won't cost much."
'55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed)
Bob's Retirement Build - My 55 TF
Bob's 700R4 Build (how-to)
DransportGarage is offline   Reply With Quote
Old 11-11-2018, 10:24 PM   #2295
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

That's how it was done 35 years ago Bob, it's really pretty solid, other than the lacquer primer and paint on top of it and the spots here and there of rust. But also, what would I be leaving that I don't see under the primer or filler?

It's a tough one.

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-11-2018, 11:40 PM   #2296
Black_Sheep
Registered User
 
Black_Sheep's Avatar
 
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
Re: What did you do with your truck today, Part 3

I rearranged the garage and covered up my toys...
Attached Images
 
Black_Sheep is offline   Reply With Quote
Old 11-12-2018, 12:03 AM   #2297
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

You have a beautiful garage Mark, that's for sure.

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-12-2018, 12:36 AM   #2298
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: What did you do with your truck today, Part 3

I am feeling better, a bunch of my stuff is selling on ebay and I have my money to get the frame and other stuff powder coated, WHOOO HOOO! After Thanksgiving, it will get done. WHOOO HOOO!

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 11-12-2018, 01:46 AM   #2299
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by MARTINSR View Post
I stripped the header panel on the bed today, I am BEAT, BEAT! HOLY CRAP that was a lot of work.
I have to REALLY re-think stripping the bed sides, they are the same, I have to REALLY re-think this. I don't know what the heck the difference was, the fenders stripped pretty easy with paint stripper, bondo and all. But this part, I don't get it, the stuff laughed at the paint stripper!

Yep, I have to re-think this whole bed, crap.

Brian
If it's that well adhered, it ain't goin' nowhere - shoot over it! Heck, if you bought a Boyd Coddington or Chip Foose car it would have that much bondo. Trying to be better than Foose would tire anyone out, ha ha!
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Old 11-12-2018, 01:49 AM   #2300
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: What did you do with your truck today, Part 3

Quote:
Originally Posted by Black_Sheep View Post
I rearranged the garage and covered up my toys...
But, but, but you can't look at your beautiful truck every day when it's all covered up!
__________________
1951 Chevy Panel Truck
MiraclePieCo is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com