How to: Ruin a perfectly good C10 - Page 92 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**69GMC2004** · 09-26-2020, 04:22 PM

Quote:

Originally Posted by gringoloco

On a little bit of a truck hiatus due to military obligations, but just got the message that my Hart Fab tubs are done. Josh builds high quality, hand-fabricated parts and these should be a real time saver. Stoked on how they turned out

Those look real sharp! Can't wait to see them installed on your truck.

1stchevy · 09-26-2020, 07:37 PM

Those wheel tubs are sweet. Truck is coming along nicely!

TA_C10 · 09-28-2020, 10:12 AM

gringoloco · 10-23-2020, 01:54 PM

Quote:

Originally Posted by SCOTI

His stuff is the shizit!

Quote:

Originally Posted by 69GMC2004

Those look real sharp! Can't wait to see them installed on your truck.

Quote:

Originally Posted by 1stchevy

Those wheel tubs are sweet. Truck is coming along nicely!

Quote:

Originally Posted by TA_C10

Thanks dudes! Having now laid eyes on them in person, they are as nice as I’d hoped. Before I get to messing with the bed though, I want to knock out the inner fender install up front.

I started by using the templates from Hart_Rod to build the shape of the cutouts. They are spot-on:

gringoloco · 10-23-2020, 02:00 PM

Next came welding them out and fitting to the fenders. I also made a couple of notches for u-nuts to accommodate bolting up through the top of the tubs.

SCOTI · 10-23-2020, 02:03 PM

Quote:

Originally Posted by gringoloco

Thanks dudes! Having now laid eyes on them in person, they are as nice as I’d hoped. Before I get to messing with the bed though, I want to knock out the inner fender install up front.

I started by using the templates from Hart_Rod to build the shape of the cutouts. They are spot-on:

I tried to send you a PM but you box is full.....

gringoloco · 10-23-2020, 02:12 PM

Then a final fit check before bodywork. The gap looks wide due to the tubs not being fully bolted in, but tightens up nicely when they are in place. Now just have to do all of that again on the other side...

gringoloco · 10-23-2020, 02:14 PM

Quote:

Originally Posted by SCOTI

I tried to send you a PM but you box is full.....

Fixed.

SCOTI · 10-23-2020, 02:31 PM

Quote:

Originally Posted by gringoloco

Fixed.

You've got Mail

TA_C10 · 10-23-2020, 03:55 PM

Those templates are the shiznit. Dang.

**Kronald_70GMC** · 10-23-2020, 07:29 PM

Wow that looks really good man! Keep it up

smbrouss70 · 10-23-2020, 11:34 PM

That really looks good!

I know the wooden bucks will probably go to the next person that needs them, but make some stencils before you send them off... I might could use that one day.

ajgriffin · 10-27-2020, 02:22 AM

Quote:

Originally Posted by gringoloco

Next came welding them out and fitting to the fenders. I also made a couple of notches for u-nuts to accommodate bolting up through the top of the tubs.

This is awesome! Took an already good design and added another improvement

Keep paying it forward my friends

smbrouss70 · 11-22-2020, 05:05 PM

Look what I found out in the wild this weekend!

cornerstone · 11-22-2020, 11:35 PM

Glad to see Gringo's getting to drive it

Any more pics?

smbrouss70 · 11-23-2020, 01:12 AM

Oh yeah, but most of the other ones have my Blazer in them too.

cornerstone · 11-25-2020, 02:07 AM

Quote:

Originally Posted by smbrouss70

oh yeah, but most of the other ones have my blazer in them too.

That's a bonus!!

I can only imagine all the hours worked between the 2...

gringoloco · 01-06-2021, 12:08 AM

Knocking out a few things on the truck lately, first up is the Altman easy latches my wife snagged me for Christmas. Overall, I have to say I’m happy with them, though I did end up modifying them to look/fit better (in my opinion). The doors do close better than before, but the latches didn’t completely cure having to break in new weatherstripping, aka, I still have to slam the door...

gringoloco · 01-06-2021, 12:13 AM

Also grabbed these super nice stainless and delrin tailgate hinges from tdtrunniondesign.com. They are super smooth and quiet when opening/closing the gate, but what I really want is for it to be quiet when I drive over bumps... we’ll see. If nothing else, I’ve eliminated the factory rusty pieces.

gringoloco · 01-06-2021, 12:26 AM

...and I’m now in the middle of a rear-end rebuild, due to some leakiness, noisiness, and one-wheel-peeliness

The housing is gutted and the 3.73s are making way for 4.10s and a Yukon posi, with all new bearings and seals.

Last pic is of my homemade pinion depth measurement tool; beats the heck out of paying $200 for a one-time use specialty tool. It’s a simple straight edge with some strategically located holes for the digital calipers to reach through. Should save some time on the initial gear setup.

ajgriffin · 01-06-2021, 02:08 AM

Quote:

Originally Posted by gringoloco

Knocking out a few things on the truck lately, first up is the Altman easy latches my wife snagged me for Christmas. Overall, I have to say I’m happy with them, though I did end up modifying them to look/fit better (in my opinion). The doors do close better than before, but the latches didn’t completely cure having to break in new weatherstripping, aka, I still have to slam the door...

All the updates are looking good! Do you think the change to the Altman will affect its overall strength or function? Enjoying the progress!

gringoloco · 01-06-2021, 09:19 AM

Quote:

Originally Posted by ajgriffin

All the updates are looking good! Do you think the change to the Altman will affect its overall strength or function? Enjoying the progress!

Thanks man! The original design wraps around the door frame and tucks under the door panel, which I didn’t really care for. The only issue I could foresee after looking at it is maybe some slight misalignment issues on initial setup, but it is very secure and looks much better with that piece removed, IMO.

aggie91 · 01-06-2021, 03:07 PM

so I don't have to go back through the whole thread...

What rear disc brake kit are you using?

Upgrade look great!

gringoloco · 01-06-2021, 03:28 PM

Quote:

Originally Posted by aggie91

so I don't have to go back through the whole thread...

What rear disc brake kit are you using?

Upgrade look great!

Thanks, Karl. The brakes are stock C5 Corvette; I modified (nothing ever seems to just be a bolt on for me) a set of brackets I bought from seller lt4xtreme on eBay.

ajgriffin · 01-07-2021, 01:14 AM

Quote:

Originally Posted by gringoloco

Thanks man! The original design wraps around the door frame and tucks under the door panel, which I didn’t really care for. The only issue I could foresee after looking at it is maybe some slight misalignment issues on initial setup, but it is very secure and looks much better with that piece removed, IMO.

I agree 100%. It doesn't look like it does anything other than ensure alignment as you alluded to since there aren't any bolts in the wrap around and there's stamping on the piece that you kept for rigidity sake. Seems like a rock solid upgrade to me

Might just have to borrow that when my time comes

09-26-2020, 07:37 PM	#2277
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: How to: Ruin a perfectly good C10 Those wheel tubs are sweet. Truck is coming along nicely! Last edited by 1stchevy; 10-10-2020 at 11:27 PM.

09-28-2020, 10:12 AM	#2278
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: How to: Ruin a perfectly good C10 __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".

10-23-2020, 02:00 PM	#2280
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Next came welding them out and fitting to the fenders. I also made a couple of notches for u-nuts to accommodate bolting up through the top of the tubs. Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-23-2020, 02:12 PM	#2282
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Then a final fit check before bodywork. The gap looks wide due to the tubs not being fully bolted in, but tightens up nicely when they are in place. Now just have to do all of that again on the other side... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 10-23-2020 at 02:18 PM.

10-23-2020, 03:55 PM	#2285
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: How to: Ruin a perfectly good C10 Those templates are the shiznit. Dang. __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".

10-23-2020, 07:29 PM	#2286
Kronald_70GMC Senior Member Join Date: Sep 2015 Location: Martensville, Saskatchewan Posts: 967	Re: How to: Ruin a perfectly good C10 Wow that looks really good man! Keep it up __________________ Kyle 1970 GMC "Project Splice" 2017 Silverado LTZ (Daily Driver) IG: kyle_ronald

10-23-2020, 11:34 PM	#2287
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: How to: Ruin a perfectly good C10 That really looks good! I know the wooden bucks will probably go to the next person that needs them, but make some stencils before you send them off... I might could use that one day. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build Last edited by smbrouss70; 10-24-2020 at 04:29 PM.

11-22-2020, 05:05 PM	#2289
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: How to: Ruin a perfectly good C10 Look what I found out in the wild this weekend! Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

11-22-2020, 11:35 PM	#2290
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: How to: Ruin a perfectly good C10 Glad to see Gringo's getting to drive it Any more pics? __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

11-23-2020, 01:12 AM	#2291
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: How to: Ruin a perfectly good C10 Oh yeah, but most of the other ones have my Blazer in them too. Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-06-2021, 12:08 AM	#2293
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Knocking out a few things on the truck lately, first up is the Altman easy latches my wife snagged me for Christmas. Overall, I have to say I’m happy with them, though I did end up modifying them to look/fit better (in my opinion). The doors do close better than before, but the latches didn’t completely cure having to break in new weatherstripping, aka, I still have to slam the door... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-06-2021, 12:13 AM	#2294
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Also grabbed these super nice stainless and delrin tailgate hinges from tdtrunniondesign.com. They are super smooth and quiet when opening/closing the gate, but what I really want is for it to be quiet when I drive over bumps... we’ll see. If nothing else, I’ve eliminated the factory rusty pieces. Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-06-2021, 12:26 AM	#2295
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 ...and I’m now in the middle of a rear-end rebuild, due to some leakiness, noisiness, and one-wheel-peeliness The housing is gutted and the 3.73s are making way for 4.10s and a Yukon posi, with all new bearings and seals. Last pic is of my homemade pinion depth measurement tool; beats the heck out of paying $200 for a one-time use specialty tool. It’s a simple straight edge with some strategically located holes for the digital calipers to reach through. Should save some time on the initial gear setup. Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-06-2021, 03:07 PM	#2298
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: How to: Ruin a perfectly good C10 so I don't have to go back through the whole thread... What rear disc brake kit are you using? Upgrade look great! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.