What did you do to your truck today part III - Page 92 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62 Barnfind · 05-08-2016, 05:50 PM

Pulled the engine again. Possible spun bearing.

jbgroby · 05-09-2016, 10:51 AM

Mounted the bumper Saturday and License Plate Bracket. Only thing left if the door glass, Hopefully this week some time.?

**Backpayne** · 05-10-2016, 08:41 PM

I installed a new Weber 32/36 and she runs! Woo-hoo! She idles smooth and there is no black smoke from running ridiculously rich! Goodbye Rochester B!

TJ's Chevy · 05-10-2016, 09:03 PM

Quote:

Originally Posted by Backpayne

I installed a new Weber 32/36 and she runs! Woo-hoo! She idles smooth and there is no black smoke from running ridiculously rich! Goodbye Rochester B!

Now where are the pictures?!??! Or the video!?!?!?!

Lugnutz65 · 05-10-2016, 09:11 PM

Quote:

Originally Posted by Backpayne

I installed a new Weber 32/36 and she runs! Woo-hoo! She idles smooth and there is no black smoke from running ridiculously rich! Goodbye Rochester B!

I sent you a PM. Needing a little advice about my Weber.

**Backpayne** · 05-11-2016, 12:18 AM

Quote:

Originally Posted by TJ's Chevy

Now where are the pictures?!??! Or the video!?!?!?!

I meant to, just too excited!

vin63 · 05-11-2016, 09:47 AM

Started to make my cuts to the bed wood and strips for the access panels to the rear end housing and gas tank fillers. Next will be making the cuts for the widened wheel tubs.

OldChevy61 · 05-11-2016, 12:37 PM

Passenger door worked,epoxied and urethaned. Ready for blocking. On to the other side.

TJ's Chevy · 05-11-2016, 10:28 PM

Scored a set of bumper guards for my GMC. Also chrome painted the valve covers cause I had the paint laying around. lol Looks pretty good to me!

Isaiah92260 · 05-12-2016, 12:20 AM

Painted my drivers door jam faw

LVPhotos · 05-12-2016, 07:32 PM

Got IDIDIT chrome plated column in.

siggyfreud · 05-12-2016, 08:49 PM

Quote:

Originally Posted by LVPhotos

Got IDIDIT chrome plated column in.

Looks good! Mine is on the way from Summit as we speak. Excited to get it. Seem like a quality unit?

LVPhotos · 05-12-2016, 08:54 PM

Quote:

Originally Posted by siggyfreud

Looks good! Mine is on the way from Summit as we speak. Excited to get it. Seem like a quality unit?

Slid into place like a factory fit. Looks like 73 up internals. Of all aftermarket parts I have this is by far the best quality part without a doubt.

doobiebro · 05-12-2016, 10:41 PM

Quote:

Originally Posted by LVPhotos

Slid into place like a factory fit. Looks like 73 up internals. Of all aftermarket parts I have this is by far the best quality part without a doubt.

Did you order a universal or the one that calls for your truck? Do you have part #s?

OldChevy61 · 05-14-2016, 08:05 PM

Door no 2 epoxied and urethaned.. Hopefully next sat they turn green.

TJ's Chevy · 05-14-2016, 11:01 PM

Testing the 572 in our 77 a bit today:

https://www.youtube.com/watch?v=6tPq...vqbdw24exe451k

**Palf70Step** · 05-15-2016, 07:21 AM

**Backpayne** · 05-15-2016, 09:20 AM

Dayum!

ironman3452 · 05-15-2016, 10:24 AM

I opened the engine to see what was not letting it turn
found that 1,7, and number 2 cylinders had white powder in them causing them not let pistons to come up to top of stroke, removed intake, removed heads, , after cleaning them, the motor turns with no problems
now will go and get new gaskets and put her back together, and see if she will run

TJ's Chevy · 05-15-2016, 10:26 AM

Quote:

Originally Posted by Palf70Step

Quote:

Originally Posted by Backpayne

Dayum!

Thanks guys!

LT1 Burb · 05-15-2016, 10:30 AM

Put on my shroud and rad hoses

62 Barnfind · 05-15-2016, 10:49 AM

Test fitted the new bed wood before it it goes out to paint.

**Backpayne** · 05-15-2016, 04:42 PM

Just scored this set of original wheels with rusty trim rings and great condition center caps from a '63. The vehicle has been in one family.

Not bad for $50!

62 Barnfind · 05-15-2016, 06:33 PM

Mocked up the new bed wood before the truck left for paint.

OldChevy61 · 05-15-2016, 07:51 PM

Hit the pick n pull this morning for Honda door seals,7.00 each. Jeep door checks,1.99 each ,and a clutch fan for 15.00.. Finished peel n seal on cab floor and behind tank.

05-08-2016, 05:50 PM	#2276
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,373	Re: What did you do to your truck today part III Pulled the engine again. Possible spun bearing. __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

05-09-2016, 10:51 AM	#2277
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today part III Mounted the bumper Saturday and License Plate Bracket. Only thing left if the door glass, Hopefully this week some time.? Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

05-10-2016, 08:41 PM	#2278
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 642	Re: What did you do to your truck today part III I installed a new Weber 32/36 and she runs! Woo-hoo! She idles smooth and there is no black smoke from running ridiculously rich! Goodbye Rochester B!

05-11-2016, 09:47 AM	#2282
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: What did you do to your truck today part III Started to make my cuts to the bed wood and strips for the access panels to the rear end housing and gas tank fillers. Next will be making the cuts for the widened wheel tubs. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

05-11-2016, 12:37 PM	#2283
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Re: What did you do to your truck today part III Passenger door worked,epoxied and urethaned. Ready for blocking. On to the other side.

05-11-2016, 10:28 PM	#2284
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III Scored a set of bumper guards for my GMC. Also chrome painted the valve covers cause I had the paint laying around. lol Looks pretty good to me! Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

05-12-2016, 12:20 AM	#2285
Isaiah92260 Registered User Join Date: Jul 2015 Location: Whittier, CA Posts: 851	Re: What did you do to your truck today part III Painted my drivers door jam faw Attached Images

05-12-2016, 07:32 PM	#2286
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: What did you do to your truck today part III Got IDIDIT chrome plated column in. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

05-14-2016, 08:05 PM	#2290
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Re: What did you do to your truck today part III Door no 2 epoxied and urethaned.. Hopefully next sat they turn green.

05-14-2016, 11:01 PM	#2291
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part III Testing the 572 in our 77 a bit today: https://www.youtube.com/watch?v=6tPq...vqbdw24exe451k __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

05-15-2016, 07:21 AM	#2292
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: What did you do to your truck today part III __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-15-2016, 09:20 AM	#2293
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 642	Re: What did you do to your truck today part III Dayum!

05-15-2016, 10:24 AM	#2294
ironman3452 Registered User Join Date: Feb 2015 Location: las cruces Posts: 218	Re: What did you do to your truck today part III I opened the engine to see what was not letting it turn found that 1,7, and number 2 cylinders had white powder in them causing them not let pistons to come up to top of stroke, removed intake, removed heads, , after cleaning them, the motor turns with no problems now will go and get new gaskets and put her back together, and see if she will run

05-15-2016, 10:30 AM	#2296
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: What did you do to your truck today part III Put on my shroud and rad hoses Attached Images

05-15-2016, 10:49 AM	#2297
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,373	Re: What did you do to your truck today part III Test fitted the new bed wood before it it goes out to paint. __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513



Register or Log In To remove these advertisements.

05-15-2016, 04:42 PM	#2298
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 642	Re: What did you do to your truck today part III Just scored this set of original wheels with rusty trim rings and great condition center caps from a '63. The vehicle has been in one family. Not bad for $50! Attached Images

05-15-2016, 06:33 PM	#2299
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,373	Re: What did you do to your truck today part III Mocked up the new bed wood before the truck left for paint. __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

05-15-2016, 07:51 PM	#2300
OldChevy61 Registered User Join Date: Apr 2015 Location: NICHOLS SC Posts: 435	Re: What did you do to your truck today part III Hit the pick n pull this morning for Honda door seals,7.00 each. Jeep door checks,1.99 each ,and a clutch fan for 15.00.. Finished peel n seal on cab floor and behind tank.

Register or Log In To remove these advertisements.