'66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... - Page 93 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 11-12-2015, 09:18 PM

Thanks mcbassin. Question for all: Painter suggests painting the steering column and wheel blue. I was thinking column blue and wheel black. Any opinions?
Posted via Mobile Device

ajgriffin · 11-12-2015, 09:44 PM

What did it look like before?

I did a quick search and I like the interiors that have a combo of 3 colors. One for the dash and door tops, another for the steering wheel or gauge cluster and another for the door panels and seats.

That being said, blue column and a black wheel would look great. I've got an affinity for wood wheels too, but not sure if that's in the trade space.

I've attached a couple examples

Graeme_B · 11-12-2015, 09:52 PM

Quote:

Originally Posted by Frizzle Fry

Thanks mcbassin. Question for all: Painter suggests painting the steering column and wheel blue. I was thinking column blue and wheel black. Any opinions?
Posted via Mobile Device

No, my vote is with black wheel and black column. Starts to get a mishmash with column shroud and indicator stalk being already black. Where do you stop.

Frizzle Fry · 11-12-2015, 11:20 PM

Dash including instrument cluster is blue. Trans tunnel/console is blue. Door tops blue. Dash pad seats and door panels black.
Posted via Mobile Device

Frizzle Fry · 11-12-2015, 11:21 PM

Dash was originally faux wood grain panels. Wheel and column were black.
Posted via Mobile Device

mcmlxix · 11-13-2015, 01:31 AM

Quote:

Originally Posted by Frizzle Fry

Thanks mcbassin. Question for all: Painter suggests painting the steering column and wheel blue. I was thinking column blue and wheel black. Any opinions?
Posted via Mobile Device

Don't forget to tie in a small bit of that red stripe from the exterior.

Frizzle Fry · 11-13-2015, 01:52 AM

Funny AJ, I also looked at the 66ish vette dash while researching this. Those other two are one rare and one very rare sunbeam. Thanks for posting them.

I do like classic wood steering wheels too. I'm leaning toward a blue column and black wheel. May change to a wood wheel later. Both will look good on a blue column I think.
Posted via Mobile Device

knomadd · 11-13-2015, 11:09 AM

Just an observation for you to consider. I've seen several wheels over the last 15 years that have been painted. When they are newly painted they look good, but after a few years of use they all seem to wear through and show the molded color. Some have even peeled. Obviously some of this is due to the prep work, but all steering wheels will suffer from some wear. Eventually the paint will be warn off and you'll have black patches (assuming your wheel was originally black).

Personally, I like the steering column and wheel to match, unless it's a wood wheel. So I'd stick with black column and black wheel. Or, if you are going with a wood wheel, go with the blue column. Just my $0.02.

The car looks beautiful by the way.

watahyahknow · 11-13-2015, 11:53 AM

you could look intoo anodinizing , the layer they put on is a lot tougher than paint

mcbassin · 11-13-2015, 12:09 PM

I like the idea of going black on the column and wheel. Just a little contrast.

Mil-Spec · 11-13-2015, 02:17 PM

Speaking of Dashboards. What is you final setup gonna look like. I recall way back you thinking about using the donor's gauges some how. Thx

Frizzle Fry · 11-14-2015, 12:52 PM

Quote:

Originally Posted by knomadd

Just an observation for you to consider. I've seen several wheels over the last 15 years that have been painted. When they are newly painted they look good, but after a few years of use they all seem to wear through and show the molded color. Some have even peeled. Obviously some of this is due to the prep work, but all steering wheels will suffer from some wear. Eventually the paint will be warn off and you'll have black patches (assuming your wheel was originally black).

Personally, I like the steering column and wheel to match, unless it's a wood wheel. So I'd stick with black column and black wheel. Or, if you are going with a wood wheel, go with the blue column. Just my $0.02.

The car looks beautiful by the way.

Good input! I agree about the paint wear. Wheel was black on black plastic so I'll stick with it. Gotta have some contrast! But I'm going blue on the column.

Quote:

Originally Posted by watahyahknow

you could look intoo anodinizing , the layer they put on is a lot tougher than paint

Anodize what? The plastic steering wheel?

Quote:

Originally Posted by mcbassin

I like the idea of going black on the column and wheel. Just a little contrast.

Contrast is good. Was a tough call.

Quote:

Originally Posted by Mil-Spec

Speaking of Dashboards. What is you final setup gonna look like. I recall way back you thinking about using the donor's gauges some how. Thx

68Timber · 11-14-2015, 01:00 PM

This thing is just stupid cool. Love it.

Frizzle Fry · 11-14-2015, 01:42 PM

More blue parts (including column)

watahyahknow · 11-14-2015, 03:45 PM

Quote:

Originally Posted by Frizzle Fry

Anodize what? The plastic steering wheel?

oops figured they where talking about a aloy/ leather steeringwheel
maibe this works :
https://www.youtube.com/watch?v=eX6i9-Gz-7c

sparkydog · 11-15-2015, 07:40 PM

Guess who came home yesterday...!!!!!!

Mil-Spec · 11-16-2015, 11:22 AM

Sweet! Have always digged the Smiths/Jaeger guages. Have these been rebuilt? They look super clean. 10K on the dolphin tach....Nice!!!

Frizzle Fry · 11-16-2015, 02:59 PM

Quote:

Originally Posted by watahyahknow

oops figured they where talking about a aloy/ leather steeringwheel
maibe this works :
https://www.youtube.com/watch?v=eX6i9-Gz-7c

Thanks for the suggestion.

Quote:

Originally Posted by sparkydog

Guess who came home yesterday...!!!!!!

Quote:

Originally Posted by Mil-Spec

Sweet! Have always digged the Smiths/Jaeger guages. Have these been rebuilt? They look super clean. 10K on the dolphin tach....Nice!!!

Yes I rebuilt them and installed a stepper motor in the speedo from an acura RSX cluster. Tach bezel was modded to fit the dolphin unit and a custom lense cut.

Frizzle Fry · 11-16-2015, 03:29 PM

Column:

ajgriffin · 02-01-2016, 12:56 PM

Hey Frizzle, how's the project coming? Or have you been doing some other cool things in other parts of the world again?

mcbassin · 02-01-2016, 05:47 PM

Update????

ERASER5 · 03-09-2016, 12:47 PM

I was reminded of this build today. So, TTT!

Frizzle Fry · 03-13-2016, 12:13 PM

Hey guys. Almost done now with a three month work project that has consumed me. Only progress since January has been some sound deadener. Can't wait to get back on this!

ERASER5 · 05-25-2016, 07:15 AM

And 2-1/2 months later.....????

Frizzle Fry · 05-30-2016, 12:48 PM

Thanks for keeping the faith guys! I just got some time out there this weekend. Here's the latest:

Hibernation mode:

Rivet detail under hood:

Vent windows rebuilt with new seals from AU (only one guy in the world making these)

New boot (trunk) seal:

Trunk Latch:

Stainless hardware:

Sound Deadener - So time consuming!

Door seal on door and new rear quarter glass:

...and Driftbeam's new stablemate (since December)

11-12-2015, 09:18 PM	#2301
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Thanks mcbassin. Question for all: Painter suggests painting the steering column and wheel blue. I was thinking column blue and wheel black. Any opinions? Posted via Mobile Device

11-12-2015, 09:44 PM	#2302
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... What did it look like before? I did a quick search and I like the interiors that have a combo of 3 colors. One for the dash and door tops, another for the steering wheel or gauge cluster and another for the door panels and seats. That being said, blue column and a black wheel would look great. I've got an affinity for wood wheels too, but not sure if that's in the trade space. I've attached a couple examples __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

11-12-2015, 11:20 PM	#2304
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Dash including instrument cluster is blue. Trans tunnel/console is blue. Door tops blue. Dash pad seats and door panels black. Posted via Mobile Device

11-12-2015, 11:21 PM	#2305
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Dash was originally faux wood grain panels. Wheel and column were black. Posted via Mobile Device

11-13-2015, 01:52 AM	#2307
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Funny AJ, I also looked at the 66ish vette dash while researching this. Those other two are one rare and one very rare sunbeam. Thanks for posting them. I do like classic wood steering wheels too. I'm leaning toward a blue column and black wheel. May change to a wood wheel later. Both will look good on a blue column I think. Posted via Mobile Device

11-13-2015, 11:09 AM	#2308
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Just an observation for you to consider. I've seen several wheels over the last 15 years that have been painted. When they are newly painted they look good, but after a few years of use they all seem to wear through and show the molded color. Some have even peeled. Obviously some of this is due to the prep work, but all steering wheels will suffer from some wear. Eventually the paint will be warn off and you'll have black patches (assuming your wheel was originally black). Personally, I like the steering column and wheel to match, unless it's a wood wheel. So I'd stick with black column and black wheel. Or, if you are going with a wood wheel, go with the blue column. Just my $0.02. The car looks beautiful by the way. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

11-13-2015, 11:53 AM	#2309
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... you could look intoo anodinizing , the layer they put on is a lot tougher than paint __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

11-13-2015, 12:09 PM	#2310
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I like the idea of going black on the column and wheel. Just a little contrast. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-13-2015, 02:17 PM	#2311
Mil-Spec Registered User Join Date: Sep 2008 Location: Dayton, Ohio Posts: 109	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Speaking of Dashboards. What is you final setup gonna look like. I recall way back you thinking about using the donor's gauges some how. Thx __________________ SEMPER FORTIS U.S. NAVY 97-05 USAF 94-97

11-14-2015, 01:00 PM	#2313
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... This thing is just stupid cool. Love it. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

11-14-2015, 01:42 PM	#2314
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... More blue parts (including column)

11-15-2015, 07:40 PM	#2316
sparkydog Registered User Join Date: Feb 2010 Location: Fallbrook, CA Posts: 910	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Guess who came home yesterday...!!!!!! Attached Images __________________ Balls and a Sawzall Project Halfbreed Porsche 944 L67V6 CARB Legal & Other Stuff

11-16-2015, 11:22 AM	#2317
Mil-Spec Registered User Join Date: Sep 2008 Location: Dayton, Ohio Posts: 109	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Sweet! Have always digged the Smiths/Jaeger guages. Have these been rebuilt? They look super clean. 10K on the dolphin tach....Nice!!! __________________ SEMPER FORTIS U.S. NAVY 97-05 USAF 94-97

11-16-2015, 03:29 PM	#2319
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Column:

02-01-2016, 12:56 PM	#2320
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Hey Frizzle, how's the project coming? Or have you been doing some other cool things in other parts of the world again? __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together



Register or Log In To remove these advertisements.

02-01-2016, 05:47 PM	#2321
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Update???? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-09-2016, 12:47 PM	#2322
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I was reminded of this build today. So, TTT! __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

03-13-2016, 12:13 PM	#2323
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Hey guys. Almost done now with a three month work project that has consumed me. Only progress since January has been some sound deadener. Can't wait to get back on this!

05-25-2016, 07:15 AM	#2324
ERASER5 Registered User Join Date: Jun 2006 Location: Indiana Posts: 4,859	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... And 2-1/2 months later.....???? __________________ '70 GMC C1500 LWB Power disc brakes. WooHoo! Posi 6 Lug Dana 60

05-30-2016, 12:48 PM	#2325
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Thanks for keeping the faith guys! I just got some time out there this weekend. Here's the latest: Hibernation mode: Rivet detail under hood: Vent windows rebuilt with new seals from AU (only one guy in the world making these) New boot (trunk) seal: Trunk Latch: Stainless hardware: Sound Deadener - So time consuming! Door seal on door and new rear quarter glass: ...and Driftbeam's new stablemate (since December)

Register or Log In To remove these advertisements.