What Did You Do With Your Truck Today ?

[Zach B]

Originally Posted by arturo7

Musta been a huge armadillo.

Yeah. The front tire was the spot he dug under. He got deap enugh that the axle was dragging the the ground.
Posted via Mobile Device

[Daze57]

do you have any picts of that -that ya can post?

[arturo7]

We should start a "varmits in our projects" thread.

Mine had rats, black widows, a bird's nest and unidentified excrement when I found it.

[lowdownstar]

well i made it to the good guys show this past weekend, truck ran great! No where near done but the back bed is painted and that works for me!!

My friend had his nova next to me plus a bunch of cool trucks!


Ray

[Daze57]

God lookin picts ! Thanks for posting.

[Coupeguy2001]

finally took the spare tire out of the back under the truck. I was dreading those rusty bolts, but they came off almost finger tight with some WD-40. Raised the back up about a half inch. when I get the gas tank back there, it will go back down.

Where do you guys keep the jack and handle? I used to wire tie them to the inside of the spare wheel to keep them from rattling. Now they are wire tied to the bolt in spare tire cross member.
Also, now I have 4 original wheels for sale, and this one has a new BFG 235/70/15 on it.

[Daze57]

just behind the seat - secured tightly

[fabguy]

finished installing the sound deadener complete, it was hard getting that stuff into the doors (both sides) and easy doing the the door panel lol, also installed the radio although havent wired it yet.
yesterday I installed the drivers side one piece glass but am NOT happy about how the glass was cut. I am working a deal with a couple glass guys for 4 pcs) 4'x4' dark smoked tempered glass that I think is 5/16" thick but might be 1/4"(not sure yet). Excited about this as it should be enough to do my truck, wifes suburban, and possibly the 39 2 dr sedan. WOO HOO

[mknittle]

Originally Posted by lowdownstar

well i made it to the good guys show this past weekend, truck ran great! No where near done but the back bed is painted and that works for me!!

My friend had his nova next to me plus a bunch of cool trucks!


Ray

Nice pictures Ray looks like fun!

[Johnny49]

Did some prep work on the frame so someone who actually knows what they're doing with a welder can just jump in and do the fix:
http://youtu.be/8BkUfvksAA8

[lazypineapple]

Checked into insuring my 52. Classic/ antique coverage
I have the basic, Lability/ uninsured coverage.
I was wanting full coverage .
But it ain't going to happen.
Some companies Limit mileage ( no daily driver)
No commuting ( only to and from Shows )
But they all "Want it kept in a Garage"

Theft is my main worry
Posted via Mobile Device

[mknittle]

Originally Posted by lazypineapple

Checked into insuring my 52. Classic/ antique coverage
I have the basic, Lability/ uninsured coverage.
I was wanting full coverage .
But it ain't going to happen.
Some companies Limit mileage ( no daily driver)
No commuting ( only to and from Shows )
But they all "Want it kept in a Garage"

Theft is my main worry
Posted via Mobile Device

Insurance companies are such a PITA! And I know what you mean about thieves. we never had that problem here but now is a different story.
Sunday night we lost 80 gallons of diesel fuel.

[arturo7]

Originally Posted by lazypineapple

Checked into insuring my 52. Classic/ antique coverage
I have the basic, Lability/ uninsured coverage.
I was wanting full coverage .
But it ain't going to happen.
Some companies Limit mileage ( no daily driver)
No commuting ( only to and from Shows )
But they all "Want it kept in a Garage"

Theft is my main worry
Posted via Mobile Device

Did you try Hagerty?

[fabguy]

Hager try is excellent from what I hear and check out AAA. They quoted me 275.00 a yr for 35K coverage but limited to 5K miles a yr in driving
Posted via Mobile Device

[lazypineapple]

Originally Posted by arturo7

Did you try Hagerty?

I just got off the phone with Hagerty.
They said it must be Garage kept when not in use.
Looking like my agent is right.
No one will cover it unless I keep it in a enclosed covered structure when not in use.
Posted via Mobile Device

[mknittle]

I gave up
Then went back to the transmission cross member that I wasn't going to use. Turned out that it was in about the right spot after all I just welded a new perch for the transmission mount. I think I will add some gussets tomorrow.

[lowdownstar]

Originally Posted by mknittle

I gave up
Then went back to the transmission cross member that I wasn't going to use. Turned out that it was in about the right spot after all I just welded a new perch for the transmission mount. I think I will add some gussets tomorrow.

And again you didn't show pic's!!!! lol I can't wait to see another fine welding job from you.... Your like my wife with all this teasing. lol have a great day Atleast your having fun with it.

Ray

[lazypineapple]

Installed my new Scott's Hot Rod upper control arms on my M2 front end.
I have plenty of adjustment and clearance now.

Posted via Mobile Device

[Johnny49]

The rivets didn't give up easily, but finally got the gusset to come out. Easy access now for the frame rail fix...

[focusedontheprize]

Originally Posted by mknittle

(took it for a spin around though). Isn't that such a good feeling

It has been raining a ton in upstate NY so I actually don't feel bad that it wasn't on the road yet.
I know that feeling. It seems like every time I bought a motorcycle the rainfall was above average

Haha it is a good feeling until I came to the end of the road with no plates on the truck and debated on going for a real spin haha.

My old man is going to grab the plates today or tomorrow so that is a relief. Had to get a new bill of sale yesterday so that is situated.

I have a little bit of a lean to the driver's side so I need to see what is going on there this weekend and also get a few odds and ends done. Pictures later.

[mknittle]

Originally Posted by lowdownstar

And again you didn't show pic's!!!! lol I can't wait to see another fine welding job from you.... Your like my wife with all this teasing. lol have a great day Atleast your having fun with it.

Ray

Yeah it was too dark by time I got done. it was a nice cool day.

[dubie]

i got all my electrical accessories working properly. Now I can turn my attention to starting this pig and breaking in the cam. Hoping to fire it tonight!!!

[fabguy]

Originally Posted by dubie

i got all my electrical accessories working properly. Now I can turn my attention to starting this pig and breaking in the cam. Hoping to fire it tonight!!!

I am a few days behind you on this one Dubie. Hopefully do it this weekend
Posted via Mobile Device

[Zach B]

Looked at the frame on mine where I blew a portin of it out with the water hide and it opened up a hole. I can fix it confirmed that so now the only other questionable spot is just behind the cab and I can get a kit for it.
Posted via Mobile Device

[Denee007]

You are going to record it, right?

Originally Posted by dubie

i got all my electrical accessories working properly. Now I can turn my attention to starting this pig and breaking in the cam. Hoping to fire it tonight!!!