your truck/ plans for it - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71BBK10 · 06-02-2002, 04:24 PM

i think it would be kinda neat if everybody posted their stats on their trucks and if they have any plans for it
i'll get it started, mines a 71 lwb fleetside 1/2 ton. little over stock 402, turbo 350 tranny and 205 tcase. 12 bolt rear and 10 bolt front with acccccckkkkk 307's. 31x10.5 on 15x10 wheels. Plans are now to get the motor back together, possibly some swampers, but not even sure if i'm gonna keep the truck once i get it going again. lets hear what yall have

Mudder · 06-02-2002, 04:32 PM

most here know what i have, if not u can read about it on the pics page. would really like to get a locker for the rear(race coming up near here by invite, that id like to race in) a 205 and 350 turbo i just found and maybe even go to some 38's for next summer. gawd u never get done with these things. ya think ya have it then bam u get another hair. lol oh well its just money!

**68SWB4x4** · 06-02-2002, 04:35 PM

68 K10 shortbed fleetside 327/465/rockwell tcase, swaping in 3/4 dana 44 with disk brakes and a 14 bolt full floater, motor has a edelbrock intake/carb and MSD distributor plans are to get it running again, and finish my axle swaps, than lift it 6" and some 35" SSRs on my 16.5x10 weld wheels

Mudder · 06-02-2002, 04:38 PM

thats gonna look a lot like Ponts truck and that aint bad at all. there are som a$$ kickin 4x4's on this site.

**MJN** · 06-02-2002, 04:43 PM

'72 GMC 6 inch lift, '71 350 LT-1 and a sm420/205 combo. Dana 60 rear/44 front. Still is down to the frame waiting for assembly.

'72 Chevy k/5 Blazer rebuilt 350/350/205 12bolt rear/44 front. 35" mud tires. needs a paint job and rear end gears. daily driver to school and work.

'74 Chevy k/20 6 inch lift, mild 350 sm465/203 combo. 14 bolt rear/44 front. getting new body since I rolled it. Going to be close to a show truck, but not quite.

71BBK10 · 06-02-2002, 04:46 PM

damn, you guys are making me feel little being that mine is stock ride height and 31's!!! lol keep em coming this is pretty cool

Blue_71 · 06-02-2002, 05:15 PM

1971 Chevy K20, im guessing custom when was new. 1970 front clip and doors, 1972 GMC bed, 1968 350 bored 30, flat tops, quadrajet set up to run on a race car, HEI, SM465, NP205, stock height with 31s...going to be 33s as soon as i can afford them, then later on 44s with 8 inches of lift

**JIMs70GMC** · 06-02-2002, 05:29 PM

What I have now: 70 3/4 ton GMC, 350, SM465, NP205, Dana 60 w/ powr-loc rear, Dana 44 front. Replaced spring bushings w/ poly, replaced body mounts w/ poly, running 325/60R15 BFG All terrains on 15"x10" wagon wheels, 4.09/4.10 gearing, factory gauges.

What I'd like to do with it: Add a locker to the front and up grade axles/axle u-joints from the 260x to 297x. Flip the rear u-bolts with a kit from ORD. Install 2.5" lift to clear 33" tires. One day replace the front sheet metal w/ a one piece fiberglass front clip. Install an underdash AC unit.

I think that's enough for a vehicle that travels 15,000 miles a year.

**68SWB4x4** · 06-02-2002, 06:09 PM

it could only hope it looks like ponts truck! he has 8" lift mega offset wheels and 14" wide tires though
but im gonna have stronger axles

wrathchild · 06-02-2002, 07:28 PM

As it still sits in garage with not much gettin done lately..(had to get wifes Jeep mud ready 1st) and its almost ready...
the '70 K5 has 7" under it..frame,under carriage,and interior is painted..still have to do body and paint,rework the 350 with lotsa goodies and buy 35"Boggers..
Here's the wife's Jeep ..the 360's going in this week..body swap went well !! [IMG]http://communities.msn.com/_Secure/0NQAAAHgSieS9r1b3g1s0TTBp9v3R*Gz6nGEe4IjCTHtFRWPoYhsPHHEXrE0*Fy3t5XBUJ8UMG9U9LZQJ63tOnw/jeep-almost2.jpg[/IMG]

imaindianoutlaw · 06-02-2002, 07:41 PM

Lets put it this way, I just tore the front clip and doors off to trash them! Bed is loose and I still have the cab to tear off! then I will start building the frame!

wrathchild · 06-02-2002, 07:43 PM

The '70 K5.....

DINS 1 · 06-02-2002, 11:02 PM

I am trying to get started on the 72 3/4 4x4 burb. I will have 4" lift 33 or 35 inch tires on 18" wheels. 4.10 gears in the eaton rear and dana 44 front. I might put crossover steering on it. It will have a 396 or ram jet 502. Tranny will be a 4l80e. when the body is done it will appear mostly stock and be painted Bright Metallic blue.

Pont · 06-02-2002, 11:19 PM

LOL@Shaggy, yep much stronger axles.
Thanks Mudder, I think many of us aspire to have a rig as nice as yours. Your truck has been a huge motivator for me.

67 K10 shortbed fleetside. 396 / SM420 4spd / Rockwell T220 transfer case. 12 bolt rear, Dana 44 disc front. 8" Skyjacker softride front springs, custom built rear springs. Crossover steering with 2wd P/S box. Rancho RS9000'S and ProComp dual steering stabilzer. Weld Typhoon 15x14 wheels with 35x14.5x15 Super Swamper SSR radials. (Love these tires so far). Hooker Competition headers (custom made to fit) with 2 1/2" pipe into Flowmaster Delta 50 series. This week it's getting a roll pan and hidden hitch. Who knows what next week, I imagine I won't stop for a couple years, maybe longer.

BLAZERMAN · 06-02-2002, 11:27 PM

69 longstep,4" rancho lift,36" directional tires, 383 stroker with bigs modified 750 holley, dana 60 front with a trac-loc, 4.56 gears. 14 bolt rear with a detroit locker, turbo 350 trans, np-205 transfer case

71 Cheyenne K-20 4" tuff country lift, project

72 K-5 blazer cst, all stock except the 2-1/2" skyjacker soft ride springs front and rear, ord greasable shackles and a front swaybar from my old 84 blazer, 33" bfg's on ralleys. Just finished this today and drove it out of the shop after being there for a year, now just have to take the top off for summer.

Beast388 · 06-03-2002, 12:20 AM

You can see in my sig what I have and this is what I want.....

3/4 ton axles( D44 front, D60 rear), 4.10 gears, Powr-Lok front & rear, SM465, 35" Swampers, maybe a little more lift, restored body with no trim and factory interior with the necessary gauges.

Oh.....and to be as nice as this one........

Rod · 06-03-2002, 12:50 PM

That a sweet Chev sub you posted pic of. I saved that pic .. cool.

**Yukon Jack** · 06-03-2002, 02:08 PM

I've been around here for a long time but always like the opportunity to show my baby around. I had always wanted a 4x4 and when we moved into the country I had a great excuse to buy one. My buddy has the below pictured white 70 1 ton that he converted to four wheel drive. It was all the inspiration I needed to know what kind of 4x4 I wanted.

I scoured the newspaper for about two months and then got in the habit of checking the newspaper's online site daily. A 69 3/4 ton 4x4 came up one Wednesday morning. I was his first call, first person to view it and he and I went to the bank as soon as I drove it to get him $$.

My modifications started with 4" Tuff Country lift front springs and a shackle flip from www.offroaddsign.com that also gains 4" of lift. Being a closed knuckle Dana 44 front axle, I had to use a Superlift adjustable drag link to correct the steering. I also purchased heavy duty front shacles and greaseable bushings for all spring bushings. Finally, I bought Tuff Country SX8000 shocks and a Rancho steering stablizer to replace the way dead factory stabilizer.

About a year later I installed power steering - what a great upgrade!

Next I had a flatbed custom built. I wanted a flatbed from day one. It is very handy and when it comes time for body work and paint - I won't have to worry about the bed.

My next upgrade is an SM465 that should go one of these weekends this month. I'm replacing the gaskets and seals and when the transfer case comes out I've got new seals and amd going to make new gaskets for it. Can't wait to get rid of that worthless 3 speed!

The truck has a Dana 44 up front, Corporate Eaton with a factory Detroit Locker, 4:56 gears and a whimpy 307. A manual throttle is handy in the winter as the choke doesn't work.

blue_69 · 06-03-2002, 03:53 PM

I just got my 4x4 its an 86 with 6 inch lift and 35's i bought it without a motor i am planning to take the torque monster 366 tall deck out of my other truck to put in the new one and maybe some bodywork and new paint too.

**68SWB4x4** · 06-03-2002, 09:45 PM

tell me how the tall deck swap goes, ive been thinking about that for my 68

O'l Buck · 06-04-2002, 02:24 AM

mines a 72 shortbox stepside K-10. as of right now, it's all basically stock, and rusty. 350 th350, i have no idea what gear ratio it has because it hasn't given me a reason to pull the covers, but i need to put lockers in it. It's running around on 31x10.50s and 8x15 ralleys from an 87 chevy. plans include a complete rebuild of the body, engine overhaul, lockers, possibly a 4" lift, and custom interior. I plan to start taking it all apart next week.

misfits · 06-04-2002, 05:08 PM

Heres mine. 1970 k-10 with a 4" lift, working on putting add a leafs on right now, 33 x 12.50 x 15 super swamper TSL.

bouncytruck · 06-04-2002, 05:22 PM

I have a '69 K-5 with 6" of Rancho lift, 35's, a mild built 350 with stainless 2.5" exhaust, TH350, NP203 - part time, front disks. I'd like to go to 3/4 ton with cross over steering and maybe some 38's some day. Of course, all this changes on a daily basis with every post I read, every magazine I see and every truck I pass!

Slick71 · 06-04-2002, 06:23 PM

My 71 is pretty much done, so here's my next project. The body is rusty in bad spots (floor supports, floor, windshield post, etc.) so I'm lookin for an entire tub to set on it. It has a built 350, automatic, 3/4 ton axles and is basically just a mud machine right now. I would love to restore it eventually and am always looking at pics of blazers for ideas.

blue_69 · 06-05-2002, 07:29 PM

I have the tall deck in my 2x4 69 right now it wasnt a bad install at all i also had this motor in my other 86 at one time i didnt really find any problems putting it in either one of them.

06-02-2002, 04:24 PM	#1
71BBK10 Teufelhunden Join Date: Oct 2001 Location: Camp Pendelton Ca Posts: 572	your truck/ plans for it i think it would be kinda neat if everybody posted their stats on their trucks and if they have any plans for it i'll get it started, mines a 71 lwb fleetside 1/2 ton. little over stock 402, turbo 350 tranny and 205 tcase. 12 bolt rear and 10 bolt front with acccccckkkkk 307's. 31x10.5 on 15x10 wheels. Plans are now to get the motor back together, possibly some swampers, but not even sure if i'm gonna keep the truck once i get it going again. lets hear what yall have __________________ 1971 K10 lwb fleetside 402 T350 205

06-02-2002, 04:32 PM	#2
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	205? most here know what i have, if not u can read about it on the pics page. would really like to get a locker for the rear(race coming up near here by invite, that id like to race in) a 205 and 350 turbo i just found and maybe even go to some 38's for next summer. gawd u never get done with these things. ya think ya have it then bam u get another hair. lol oh well its just money!

06-02-2002, 04:35 PM	#3
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	68 K10 shortbed fleetside 327/465/rockwell tcase, swaping in 3/4 dana 44 with disk brakes and a 14 bolt full floater, motor has a edelbrock intake/carb and MSD distributor plans are to get it running again, and finish my axle swaps, than lift it 6" and some 35" SSRs on my 16.5x10 weld wheels __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

06-02-2002, 04:38 PM	#4
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	shag! thats gonna look a lot like Ponts truck and that aint bad at all. there are som a$$ kickin 4x4's on this site.

06-02-2002, 04:46 PM	#6
71BBK10 Teufelhunden Join Date: Oct 2001 Location: Camp Pendelton Ca Posts: 572	damn, you guys are making me feel little being that mine is stock ride height and 31's!!! lol keep em coming this is pretty cool __________________ 1971 K10 lwb fleetside 402 T350 205

06-02-2002, 04:43 PM	#5
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,046	'72 GMC 6 inch lift, '71 350 LT-1 and a sm420/205 combo. Dana 60 rear/44 front. Still is down to the frame waiting for assembly. '72 Chevy k/5 Blazer rebuilt 350/350/205 12bolt rear/44 front. 35" mud tires. needs a paint job and rear end gears. daily driver to school and work. '74 Chevy k/20 6 inch lift, mild 350 sm465/203 combo. 14 bolt rear/44 front. getting new body since I rolled it. Going to be close to a show truck, but not quite.

06-02-2002, 05:29 PM	#8
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	What I have now: 70 3/4 ton GMC, 350, SM465, NP205, Dana 60 w/ powr-loc rear, Dana 44 front. Replaced spring bushings w/ poly, replaced body mounts w/ poly, running 325/60R15 BFG All terrains on 15"x10" wagon wheels, 4.09/4.10 gearing, factory gauges. What I'd like to do with it: Add a locker to the front and up grade axles/axle u-joints from the 260x to 297x. Flip the rear u-bolts with a kit from ORD. Install 2.5" lift to clear 33" tires. One day replace the front sheet metal w/ a one piece fiberglass front clip. Install an underdash AC unit. I think that's enough for a vehicle that travels 15,000 miles a year. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-02-2002, 06:09 PM	#9
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	it could only hope it looks like ponts truck! he has 8" lift mega offset wheels and 14" wide tires though but im gonna have stronger axles __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

06-02-2002, 07:28 PM	#10
wrathchild LIKE 'EM BIG AND TOPLESS Join Date: Dec 2000 Location: Frederic,Michigan Posts: 596	As it still sits in garage with not much gettin done lately..(had to get wifes Jeep mud ready 1st) and its almost ready... the '70 K5 has 7" under it..frame,under carriage,and interior is painted..still have to do body and paint,rework the 350 with lotsa goodies and buy 35"Boggers.. Here's the wife's Jeep ..the 360's going in this week..body swap went well !! [IMG]http://communities.msn.com/_Secure/0NQAAAHgSieS9r1b3g1s0TTBp9v3RGz6nGEe4IjCTHtFRWPoYhsPHHEXrE0Fy3t5XBUJ8UMG9U9LZQJ63tOnw/jeep-almost2.jpg[/IMG] Last edited by wrathchild; 06-02-2002 at 07:32 PM.

06-02-2002, 07:41 PM	#11
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	Lets put it this way, I just tore the front clip and doors off to trash them! Bed is loose and I still have the cab to tear off! then I will start building the frame! __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

06-02-2002, 07:43 PM	#12
wrathchild LIKE 'EM BIG AND TOPLESS Join Date: Dec 2000 Location: Frederic,Michigan Posts: 596	The '70 K5..... Attached Images

06-02-2002, 11:02 PM	#13
DINS 1 Registered User Join Date: Apr 2000 Location: Webster City, Iowa USA Posts: 572	I am trying to get started on the 72 3/4 4x4 burb. I will have 4" lift 33 or 35 inch tires on 18" wheels. 4.10 gears in the eaton rear and dana 44 front. I might put crossover steering on it. It will have a 396 or ram jet 502. Tranny will be a 4l80e. when the body is done it will appear mostly stock and be painted Bright Metallic blue. __________________ Wade "DURAMAX BURB" Burb on 2004 chevy 2500HD 4x4 Duramax chassis Long term project 2004 2500HD 4x4 crew cab GMC Duramax 4" lift 35's 79 RS Camaro

06-02-2002, 11:19 PM	#14
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	LOL@Shaggy, yep much stronger axles. Thanks Mudder, I think many of us aspire to have a rig as nice as yours. Your truck has been a huge motivator for me. 67 K10 shortbed fleetside. 396 / SM420 4spd / Rockwell T220 transfer case. 12 bolt rear, Dana 44 disc front. 8" Skyjacker softride front springs, custom built rear springs. Crossover steering with 2wd P/S box. Rancho RS9000'S and ProComp dual steering stabilzer. Weld Typhoon 15x14 wheels with 35x14.5x15 Super Swamper SSR radials. (Love these tires so far). Hooker Competition headers (custom made to fit) with 2 1/2" pipe into Flowmaster Delta 50 series. This week it's getting a roll pan and hidden hitch. Who knows what next week, I imagine I won't stop for a couple years, maybe longer. __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness" Last edited by Pont; 12-03-2002 at 08:48 AM.

06-02-2002, 11:27 PM	#15
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	69 longstep,4" rancho lift,36" directional tires, 383 stroker with bigs modified 750 holley, dana 60 front with a trac-loc, 4.56 gears. 14 bolt rear with a detroit locker, turbo 350 trans, np-205 transfer case 71 Cheyenne K-20 4" tuff country lift, project 72 K-5 blazer cst, all stock except the 2-1/2" skyjacker soft ride springs front and rear, ord greasable shackles and a front swaybar from my old 84 blazer, 33" bfg's on ralleys. Just finished this today and drove it out of the shop after being there for a year, now just have to take the top off for summer. Attached Images __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 06-03-2002 at 09:08 PM.

06-03-2002, 12:20 AM	#16
Beast388 Suburbans RULE! Join Date: Jan 2000 Location: Clinton, IA 52732 Posts: 689	You can see in my sig what I have and this is what I want..... 3/4 ton axles( D44 front, D60 rear), 4.10 gears, Powr-Lok front & rear, SM465, 35" Swampers, maybe a little more lift, restored body with no trim and factory interior with the necessary gauges. Oh.....and to be as nice as this one........ Attached Images __________________ --Ben 71 GMC Suburban 4X4 The "Beast" 388 CID Stroker, TH350, NP205, 8-lug D44, 14BFF w/ Detroit, 4.10:1 gears, 4-Wheel Disks 4" Lift, 35" MT/R's.



Register or Log In To remove these advertisements.

06-03-2002, 12:50 PM	#17
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	That a sweet Chev sub you posted pic of. I saved that pic .. cool. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

06-03-2002, 02:08 PM	#18
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	I've been around here for a long time but always like the opportunity to show my baby around. I had always wanted a 4x4 and when we moved into the country I had a great excuse to buy one. My buddy has the below pictured white 70 1 ton that he converted to four wheel drive. It was all the inspiration I needed to know what kind of 4x4 I wanted. I scoured the newspaper for about two months and then got in the habit of checking the newspaper's online site daily. A 69 3/4 ton 4x4 came up one Wednesday morning. I was his first call, first person to view it and he and I went to the bank as soon as I drove it to get him $$. My modifications started with 4" Tuff Country lift front springs and a shackle flip from www.offroaddsign.com that also gains 4" of lift. Being a closed knuckle Dana 44 front axle, I had to use a Superlift adjustable drag link to correct the steering. I also purchased heavy duty front shacles and greaseable bushings for all spring bushings. Finally, I bought Tuff Country SX8000 shocks and a Rancho steering stablizer to replace the way dead factory stabilizer. About a year later I installed power steering - what a great upgrade! Next I had a flatbed custom built. I wanted a flatbed from day one. It is very handy and when it comes time for body work and paint - I won't have to worry about the bed. My next upgrade is an SM465 that should go one of these weekends this month. I'm replacing the gaskets and seals and when the transfer case comes out I've got new seals and amd going to make new gaskets for it. Can't wait to get rid of that worthless 3 speed! The truck has a Dana 44 up front, Corporate Eaton with a factory Detroit Locker, 4:56 gears and a whimpy 307. A manual throttle is handy in the winter as the choke doesn't work. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-03-2002, 03:53 PM	#19
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	I just got my 4x4 its an 86 with 6 inch lift and 35's i bought it without a motor i am planning to take the torque monster 366 tall deck out of my other truck to put in the new one and maybe some bodywork and new paint too.

06-03-2002, 09:45 PM	#20
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	tell me how the tall deck swap goes, ive been thinking about that for my 68 __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

06-04-2002, 02:24 AM	#21
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	mines a 72 shortbox stepside K-10. as of right now, it's all basically stock, and rusty. 350 th350, i have no idea what gear ratio it has because it hasn't given me a reason to pull the covers, but i need to put lockers in it. It's running around on 31x10.50s and 8x15 ralleys from an 87 chevy. plans include a complete rebuild of the body, engine overhaul, lockers, possibly a 4" lift, and custom interior. I plan to start taking it all apart next week. __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

06-04-2002, 05:08 PM	#22
misfits Registered User Join Date: Feb 2001 Location: Sturgeon Bay , WI USA Posts: 375	Heres mine. 1970 k-10 with a 4" lift, working on putting add a leafs on right now, 33 x 12.50 x 15 super swamper TSL. Attached Images

06-04-2002, 05:22 PM	#23
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	I have a '69 K-5 with 6" of Rancho lift, 35's, a mild built 350 with stainless 2.5" exhaust, TH350, NP203 - part time, front disks. I'd like to go to 3/4 ton with cross over steering and maybe some 38's some day. Of course, all this changes on a daily basis with every post I read, every magazine I see and every truck I pass! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 06-04-2002 at 05:32 PM.

06-04-2002, 06:23 PM	#24
Slick71 Registered User Join Date: Feb 2001 Location: Savannah, MO. Posts: 513	My 71 is pretty much done, so here's my next project. The body is rusty in bad spots (floor supports, floor, windshield post, etc.) so I'm lookin for an entire tub to set on it. It has a built 350, automatic, 3/4 ton axles and is basically just a mud machine right now. I would love to restore it eventually and am always looking at pics of blazers for ideas. Attached Images __________________ 1972 Chevy Blazer 4X4 Savannah, MO. www.thefarmatadair.com

06-05-2002, 07:29 PM	#25
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	I have the tall deck in my 2x4 69 right now it wasnt a bad install at all i also had this motor in my other 86 at one time i didnt really find any problems putting it in either one of them. Attached Images

Register or Log In To remove these advertisements.