roof lights. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 09-25-2005, 01:03 PM

im sure this is a long shot. does anyone out there have one of those roofs with the raised pads for the lights on them that they would be willing to sell. dont need the entire roof. just that section cut out with maybe 6 inches of extra metal all around it.

roger0080 · 09-25-2005, 01:24 PM

Me too. I would like to know how you plan on fabricating the cut out section into an existing roof top!

HuggerCST · 09-25-2005, 01:48 PM

I have one. It has bondo/rust around the driprail, but is good otherwise. Make me an offer if you're interested.

CG · 09-25-2005, 04:39 PM

hugger if there is a way you can take a picture of it i can show it to the fella that is going to patch it in for me. and maybe he can tell me what its worth. im not good at making offers. dont wanna low ball you and insult you and i dont wanna find out i paid way to much down the road and get pissed everytime i look at the cab lights....thanks

55chevy · 09-25-2005, 04:41 PM

I saw one of these in a hillbillies lil junkyard, I think he wanted to sell the whole cab, down here in SE Alabama.

CG · 09-25-2005, 04:44 PM

would hate to have to pay shipping all the way from bama for a whole cab. sneak over there with a sawzall would ya?

55chevy · 09-25-2005, 04:53 PM

LOL, I got bee stung last time, he probably has a shotgun. He was real hard to understand, but you sure sould smell him. Actually, I was looking for an inner roof, can't remember if he would have let me cut that one off.

HuggerCST · 09-26-2005, 10:27 AM

I'll try to get you some pics this evening.

HuggerCST · 09-28-2005, 03:15 PM

pics

CG · 09-28-2005, 08:35 PM

i will forward these pic to my friend and let you know tomorrow...thanks

CG · 10-03-2005, 10:55 PM

well my guy finally got back to me. he said those are going to take a little more work than i am going to want to pay him to do. he has talked me into just using flush mount cab lights for now, that way if i dont like em it will just be a small hole to fill. thanks for grabbing the pics. sorry it took so long to get back with you.

Hutch · 10-03-2005, 11:50 PM

CG
Check these out
Roof Lights

stllookn · 10-03-2005, 11:52 PM

Mark, Seal the heck out of those flush mounted lights. I pulled the ones from '67 short stepside and found lots of leakage and rust. It is a direct shot to the top of the windshield from those lights. Just a word of caution.

Hutch....nice lights! Mine were very similar to those...they just did not seal them down to the cab.

HuggerCST · 10-04-2005, 09:15 AM

Quote:

Originally Posted by Hutch

CG
Check these out
Roof Lights

I've got 4 descent used ones like that if someone needs one(or all) to finish your set.

**special-K** · 10-04-2005, 09:26 AM

I`ve mounted the original lights on a regylar roof and it looked great.That`s what the factory did on post-72s with the same light.I didn`t realize the factory made a special roof for these until i had already had mine on for a while.I always wondered why they bothered.But,once I knew to be "correct",I have wanted the "pads" ever since.Just that little extra detail.

CG · 10-04-2005, 08:53 PM

thanks guys, i have a set of the flush mount factory style lights already. i really like the looks of the bumped up ones better though .... and yes i know they are called cab lights. dunno where my brain was when i called em roof lights...lol.

09-25-2005, 01:03 PM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,943	roof lights. im sure this is a long shot. does anyone out there have one of those roofs with the raised pads for the lights on them that they would be willing to sell. dont need the entire roof. just that section cut out with maybe 6 inches of extra metal all around it.

09-25-2005, 01:24 PM	#2
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 626	Me too. I would like to know how you plan on fabricating the cut out section into an existing roof top! __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71...

09-25-2005, 01:48 PM	#3
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I have one. It has bondo/rust around the driprail, but is good otherwise. Make me an offer if you're interested. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

09-25-2005, 04:41 PM	#5
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	I saw one of these in a hillbillies lil junkyard, I think he wanted to sell the whole cab, down here in SE Alabama. __________________ Snow free Florida panhandle, don't miss Indiana winters Temp in Suffolk Virginia, Sentenced 2 to 5 years LOL 68 shortfleet project 94 3500 TD dually so many cars so little time 72 K2 CST 2WD Blazer

09-26-2005, 10:27 AM	#8
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I'll try to get you some pics this evening. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

09-25-2005, 04:39 PM	#4
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,943	hugger if there is a way you can take a picture of it i can show it to the fella that is going to patch it in for me. and maybe he can tell me what its worth. im not good at making offers. dont wanna low ball you and insult you and i dont wanna find out i paid way to much down the road and get pissed everytime i look at the cab lights....thanks

09-25-2005, 04:44 PM	#6
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,943	would hate to have to pay shipping all the way from bama for a whole cab. sneak over there with a sawzall would ya?

09-25-2005, 04:53 PM	#7
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	LOL, I got bee stung last time, he probably has a shotgun. He was real hard to understand, but you sure sould smell him. Actually, I was looking for an inner roof, can't remember if he would have let me cut that one off.

09-28-2005, 03:15 PM	#9
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	pics Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

09-28-2005, 08:35 PM	#10
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,943	i will forward these pic to my friend and let you know tomorrow...thanks

10-03-2005, 10:55 PM	#11
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,943	well my guy finally got back to me. he said those are going to take a little more work than i am going to want to pay him to do. he has talked me into just using flush mount cab lights for now, that way if i dont like em it will just be a small hole to fill. thanks for grabbing the pics. sorry it took so long to get back with you.

10-03-2005, 11:50 PM	#12
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	CG Check these out Roof Lights Attached Images __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

10-03-2005, 11:52 PM	#13
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Mark, Seal the heck out of those flush mounted lights. I pulled the ones from '67 short stepside and found lots of leakage and rust. It is a direct shot to the top of the windshield from those lights. Just a word of caution. Hutch....nice lights! Mine were very similar to those...they just did not seal them down to the cab. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 10-03-2005 at 11:55 PM.

10-04-2005, 09:26 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	I`ve mounted the original lights on a regylar roof and it looked great.That`s what the factory did on post-72s with the same light.I didn`t realize the factory made a special roof for these until i had already had mine on for a while.I always wondered why they bothered.But,once I knew to be "correct",I have wanted the "pads" ever since.Just that little extra detail. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-04-2005, 08:53 PM	#16
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,943	thanks guys, i have a set of the flush mount factory style lights already. i really like the looks of the bumped up ones better though .... and yes i know they are called cab lights. dunno where my brain was when i called em roof lights...lol.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.