bunch of 73-87's in the yard - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 · 02-25-2003, 08:21 PM

i went to a local yard today and they had probly 20+ of our trucks. there was alot of good sheet metal. 7 or 8 burbs. 1 2wd blazer with really nice body. 2 or 3 4wd blazers. no tach dashes. two suburban buckets that need recovered. two center consoles for bucket trucks, one is tan an looks good and complete, the other is blue and is busted on the bottum but the lid looks good. 1 sub with 88-91 front end, but missing one of the headlight trim piece's. they had a perfect condition plastic gauge cluster sorround thing that is one of the black crinkle finish ones that i think i might go back and get. and just all kinds of odds and ends.

if you are looking for any of this let me know and i'll see what i can do or if you are looking for anything else thy might have it.

LOHRTBT · 02-25-2003, 08:25 PM

damn..find out how much for the burban front core with lights and all please.

is it in good shape??

low 84 · 02-25-2003, 08:32 PM

yeah man, there was some ice on it b/c its cold but it all looked real good, cept it was missing the drivers headlight trim peice. i'll ask em when i go back over there.

LOHRTBT · 02-25-2003, 08:48 PM

Thank you sir!

z71runner · 02-25-2003, 09:06 PM

damn, too bad u are in texas...

79Silv4x4 · 02-25-2003, 09:26 PM

Need rust free front fenders for my '79 with or w/o trim holes and I could make the trip there to get them. Thanks

*racedvl* · 02-25-2003, 10:13 PM

Man I need a passenger side door soooo bad, and if i decide to keep my 87 I need barn doors for it as well......too bad TX is soo far away. . . .

But then again, if it wasn't, the metal would look like hell like the metal around here. . .

low 84 · 02-25-2003, 11:44 PM

i think i'll take a digi out there in a week or two and get pics of the stuff. they do have barn doors and passenger doors and 70's fenders.

75stepside · 02-26-2003, 12:06 AM

i'm needin' a set of black factory seat belts for my project... any luck?

*Mdapperdan* · 02-26-2003, 12:13 AM

Looking for complete, clean no rust rear doors for '73-'75 Suburban.
Thanks Dan

gchemist · 02-26-2003, 12:21 AM

I need a gas tank hose holder for an '83. I think late 70's to '83 were the same. I need one for the passenger side. Will $$$ for item.

79BIG10 · 02-26-2003, 01:57 PM

Ryan is this near Dallas or near you at school?

Tom · 02-26-2003, 02:39 PM

dam, Ive only been looking on here and every junk yard for good fenders for how many months guys??

I need both front fenders for my 79 c10, WITHOUT trim holes. Thanks low!

low 84 · 02-26-2003, 02:44 PM

75 stepside, if i find any factory black seat belts they are going on ebay, lol. they are alomost imposible to find. but seriously i would give you first dib's. they didn't currently have any. those and tach dashes is what i had my eye out for and they didn't have either.

this place is on highway 6 just north of college station. i will most likley be going back in about a week and a half and will try to take a digi cam.

mhs · 02-26-2003, 09:44 PM

I am real interested in bucket seats with brackets for an 85 Burb and maybe the tan console.
Let me know the price with shipping and maybe.........

Thanks
Mike

low 84 · 02-26-2003, 10:27 PM

Quote:

Originally posted by mhs
I am real interested in bucket seats with brackets for an 85 Burb and maybe the tan console.
Let me know the price with shipping and maybe.........
Thanks
Mike

i'll check how much they want for the stuff, but i'm guessing to ship it is gonna cost around 100 bux. but i'll let you know

littlebubba · 02-27-2003, 01:24 AM

Got any more info or details on the 2WD Blazer they have? I might be able to use it.

low 84 · 02-27-2003, 01:50 AM

Quote:

Originally posted by littlebubba
Got any more info or details on the 2WD Blazer they have? I might be able to use it.

the 2wd appeared to have a real nice straight body. the interior was pretty striped, mainly just a frame and body sitting there on some old wheels. still had the front crossmember and ifs though.

looks like there is alot more intrest than i though. i will get pics and prices guys

littlebubba · 02-28-2003, 04:17 PM

Can you get some good pics of the 2WD Blazer? Find out the price and details. Does it have a title? Sounds like what I need. Good straight body from the firewall back on a rolling frame, for cruise rod project. What color was it? How complete is the interior? Not worried about motor or trans. Any name or number for the place?
email: rodguy55@hotmail.com

littlebubba · 03-10-2003, 10:53 PM

Ryan:
have you made a return trip out to that boneyard yet to get any more info or pics?

low 84 · 03-11-2003, 02:57 AM

not yet. been busy helping a friend out with his truck. hopefully i can make it back over there sometime this week and i will get the info and pics

Gregsmx · 04-04-2003, 12:23 AM

Ryan, regarding the Blazers, I am looking for regular buckets from '73-'77 or high back buckets from the 76-78 timeframe. Also, on the Center consoles, are they the style with the seatbelt opening in the front? If so, how's the crome or stainless trim on top of the console?
Thanks, Greg, in San Antonio.

low 84 · 04-04-2003, 01:21 AM

sorry guys i've slacked off on this one. my buddy that had the digi cam i was gonna go out there with a few weeks ago got in some trouble with the law, and i just got a cam but between work and school and barely have enough time to sleep, so its been hectic.

the seats are in a suburban greg, i think they are high back style but not for sure, and they are in an 80's burb. both the consoles are in 80's burbs too. and i don't think either incorparate seat belt attachments.

i will really try to make it back out there in the next two weeks guys, sorry for the delay.

kevhill85 · 04-04-2003, 11:24 PM

i have a 90 burban core suooort that i will trade for some parts . but will not ship. we have to be able to meet somewhere . the light r not in that good of shape . the wiring harrnes is with it to .

02-25-2003, 08:21 PM	#1
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	bunch of 73-87's in the yard i went to a local yard today and they had probly 20+ of our trucks. there was alot of good sheet metal. 7 or 8 burbs. 1 2wd blazer with really nice body. 2 or 3 4wd blazers. no tach dashes. two suburban buckets that need recovered. two center consoles for bucket trucks, one is tan an looks good and complete, the other is blue and is busted on the bottum but the lid looks good. 1 sub with 88-91 front end, but missing one of the headlight trim piece's. they had a perfect condition plastic gauge cluster sorround thing that is one of the black crinkle finish ones that i think i might go back and get. and just all kinds of odds and ends. if you are looking for any of this let me know and i'll see what i can do or if you are looking for anything else thy might have it. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

02-25-2003, 08:25 PM	#2
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	damn..find out how much for the burban front core with lights and all please. is it in good shape?? __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-25-2003, 08:32 PM	#3
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	yeah man, there was some ice on it b/c its cold but it all looked real good, cept it was missing the drivers headlight trim peice. i'll ask em when i go back over there. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

02-25-2003, 08:48 PM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Thank you sir! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-25-2003, 09:06 PM	#5
z71runner nothin to say Join Date: Feb 2003 Location: GlEnDaLe, ArIzOnA Posts: 143	damn, too bad u are in texas... __________________ 1988 3500 Chevy Silverado 454 7.5 inch lift on 35 inch tires

02-25-2003, 09:26 PM	#6
79Silv4x4 Workaholic Join Date: Oct 2002 Location: Katy, TX Posts: 1,589	Need rust free front fenders for my '79 with or w/o trim holes and I could make the trip there to get them. Thanks __________________ 1979 K-10 Silverado (work in progress) 1991 V1500 Subruban 1999 Suburban LT 4x4 2006 Suburban LTZ (daily driver)

02-25-2003, 10:13 PM	#7
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Man I need a passenger side door soooo bad, and if i decide to keep my 87 I need barn doors for it as well......too bad TX is soo far away. . . . But then again, if it wasn't, the metal would look like hell like the metal around here. . .

02-25-2003, 11:44 PM	#8
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i think i'll take a digi out there in a week or two and get pics of the stuff. they do have barn doors and passenger doors and 70's fenders. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

02-26-2003, 12:06 AM	#9
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	i'm needin' a set of black factory seat belts for my project... any luck?

02-26-2003, 12:13 AM	#10
Mdapperdan Account Suspended Join Date: Jan 2003 Location: Santa Rosa Ca. /Prescott Az. Posts: 169	'73- 75 Rear Doors Looking for complete, clean no rust rear doors for '73-'75 Suburban. Thanks Dan

02-26-2003, 12:21 AM	#11
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	I need a gas tank hose holder for an '83. I think late 70's to '83 were the same. I need one for the passenger side. Will $$$ for item. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

02-26-2003, 01:57 PM	#12
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Ryan is this near Dallas or near you at school? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-26-2003, 02:39 PM	#13
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,714	dam, Ive only been looking on here and every junk yard for good fenders for how many months guys?? I need both front fenders for my 79 c10, WITHOUT trim holes. Thanks low! __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

02-26-2003, 02:44 PM	#14
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	75 stepside, if i find any factory black seat belts they are going on ebay, lol. they are alomost imposible to find. but seriously i would give you first dib's. they didn't currently have any. those and tach dashes is what i had my eye out for and they didn't have either. this place is on highway 6 just north of college station. i will most likley be going back in about a week and a half and will try to take a digi cam. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

02-26-2003, 09:44 PM	#15
mhs Registered User Join Date: Mar 2002 Location: Las Vegas, NV Posts: 55	I am real interested in bucket seats with brackets for an 85 Burb and maybe the tan console. Let me know the price with shipping and maybe......... Thanks Mike __________________ "Success is going from failure to failure without losing your enthusiasm" (Abraham Lincoln) Last edited by mhs; 02-26-2003 at 09:47 PM.



Register or Log In To remove these advertisements.

02-27-2003, 01:24 AM	#17
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	2WD Blazer Got any more info or details on the 2WD Blazer they have? I might be able to use it.

02-28-2003, 04:17 PM	#19
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	2WD Blazer pics Can you get some good pics of the 2WD Blazer? Find out the price and details. Does it have a title? Sounds like what I need. Good straight body from the firewall back on a rolling frame, for cruise rod project. What color was it? How complete is the interior? Not worried about motor or trans. Any name or number for the place? email: rodguy55@hotmail.com

03-10-2003, 10:53 PM	#20
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Return Trip to the Boneyard? Ryan: have you made a return trip out to that boneyard yet to get any more info or pics?

03-11-2003, 02:57 AM	#21
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	not yet. been busy helping a friend out with his truck. hopefully i can make it back over there sometime this week and i will get the info and pics __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

04-04-2003, 12:23 AM	#22
Gregsmx Registered User Join Date: Jan 2003 Location: San Antonio Tx Posts: 338	Ryan, regarding the Blazers, I am looking for regular buckets from '73-'77 or high back buckets from the 76-78 timeframe. Also, on the Center consoles, are they the style with the seatbelt opening in the front? If so, how's the crome or stainless trim on top of the console? Thanks, Greg, in San Antonio. __________________ '75 Blazer RAT 4X4 "BLAZIN" - Custom frame off Here's the website I'm uploading pics to: Greg's frame off project

04-04-2003, 01:21 AM	#23
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	sorry guys i've slacked off on this one. my buddy that had the digi cam i was gonna go out there with a few weeks ago got in some trouble with the law, and i just got a cam but between work and school and barely have enough time to sleep, so its been hectic. the seats are in a suburban greg, i think they are high back style but not for sure, and they are in an 80's burb. both the consoles are in 80's burbs too. and i don't think either incorparate seat belt attachments. i will really try to make it back out there in the next two weeks guys, sorry for the delay. __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

04-04-2003, 11:24 PM	#24
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	i have a 90 burban core suooort that i will trade for some parts . but will not ship. we have to be able to meet somewhere . the light r not in that good of shape . the wiring harrnes is with it to . __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

Register or Log In To remove these advertisements.